Internet #202073861

Model #GX1S01R

Store SKU #186457

Store SO SKU #1000842666

Single Stage Water Filtration System

  • Fresh filtered water for your cooking and drinking needs
  • Customizable filtration available
  • Compatible with filters FXUTC, FXULC or FXUVC
  • See More Details

Frequently Bought Together

+
+
Price:
$3597

Product Overview

Enjoy the clean, refreshing taste of filtered water right at your kitchen sink with the GE Single Stage Under-Counter Filtration System. The filtration system uses a carbon spun-fiber filtering method, and is able to reduce chlorine taste, lead, cysts and VOC's. Compatible with filters FXUTC, FXULC and FXUVC (all sold separately).
  • Single stage filtration delivers filtered water direct from your faucet
  • Mounting bracket for easier installation
  • Premium filtration with the option to choose your level of filtration, compatible filters: FXUTC, FXULC or FXUVC
  • Filter should be replaced every 6-months for best filtration results
  • Feed water temperature 40°F – 100°F
  • Easy to install
  • Filters down to 0.5 microns, the lower the micron the more contaminants are caught and reduced



Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Under Sink Water Filters

Under Sink Drinking Water Filter System
current product
Single Stage Water Filtration System
Under-Sink Advanced Water Filtration SystemMaximum Under Sink Water Filtration System
BrandEcoPureGEFiltreteFiltrete
NameUnder Sink Drinking Water Filter SystemSingle Stage Water Filtration SystemUnder-Sink Advanced Water Filtration SystemMaximum Under Sink Water Filtration System
Price
$1948
$3597
$4099
$5171
Ratings
(28)
(161)
(203)
(83)
IncludesHardware,Installation kitNo Additional Items IncludedHardware,Installation kitFilter
House Hold Size5-6 peopleUnspecified5-6 people5-6 people
Number of Stages1 Stage1 Stage3 Stage2 Stage
Filtration MethodCarbon BlockCarbon Spun FiberSandCarbon Block
FeaturesNo additional featuresNo additional featuresTwist and lock designAutomatic shutoff
Ease of InstallEasy InstallEasy InstallDrilling RequiredDrilling Required
Product Type Filter System
Contaminants Filtered ChlorineLead, Chlorine
View ProductView ProductView ProductView Product

Specifications

Dimensions

Fitting size (in.)
0.375
Product Depth (in.)
5.5 in
Product Height (in.)
13.25 in
Product Width (in.)
4.5 in

Details

Application Type
Water Treatment
Bacteria Reduction (%)
0
Chlorine reduction (%)
0
Color/Finish
White
Copper Reduction (%)
0
Ease of Install
Easy Install
Features
No additional features
Filtration Method
Carbon Spun Fiber
Fitting style
Push to connect
Fluoride Reduction (%)
0
House Hold Size
Unspecified
Includes
No Additional Items Included
Iron Reduction (%)
0
Lead reduction (%)
0
Maximum feed water pressure (psi)
125
Maximum feed water temperature (F)
100
Maximum filtered water flow (gallons per min.)
2
Minimum feed water pressure (psi)
20
Minimum feed water temperature (F)
40
Number of filters included
0
Number of Stages
1 Stage
Pack Size
3
Product Type
Filter System
Product Weight (lb.)
2.5 lb
Replacement Filter Type
Under Sink Replacement Filters
Returnable
180-Day
Water Filtration System Type
Under Sink

Warranty / Certifications

Certifications and Listings
NSF Certified
Manufacturer Warranty
1 year limited warranty

Questions & Answers

73Questions25Answers

Looking for a replacement unit - the one we have is about 6 years old and developed a pin hole le...

Asked by GaryB June 2, 2020
2
Answers

Hi GaryB, I had same thing happen about 5 years ago. Called GE support and they told me that chemicals in tap water can slowly degrade the plastic over years of service causing the pinhole leaks you and I experienced. So now I change the filters every 6 months and change the filter system/housing every 5 years. I recently looked around for alternate brand/model filtration system and the most reasonable one was Culligan model US-600A. I actually ordered it but upon receipt discovered that the incoming/outgoing water connections are plastic hoses simply press-fit into the housing inlet/outlet holes (there's a one-way clamp and o-ring inside to hold/seal the plastic hose). I really didn't like the idea of plastic hoses press fit into couplings - I can imagine the hose popping out and ending up with a much-worse-than-pinhole leak. So in the end I returned the Culligan filter and purchased this same GE model again (on my once-every-5 year schedule) because it uses very solid screw-in fittings which can be connected to the metal-braid reinforced water supply hoses. I'll probably by this same filter housing again 5 years from now, even doing this I think it's an overall better value than most other filtration systems. Hope this helps! LRC

No question just the same complaint as everyone else! The filter does not let you screw the capsule on tightly enough.

Asked by Ryan May 12, 2020
2
Answers

Hello Ryan - Thank you for reaching out about your filter. We are sorry to hear about the issue with changing the filter. If the casing will not screw on completely, the filter cartridge may have been installed upside down. Please let us know if you have any more questions. - JB

What comes with the filter housing? Parts, filter, etc. Thanks

Asked by John February 28, 2020
2
Answers

Hi John - A mounting bracket is included for easier installation. Compatible filters FXUTC, FXULC and FXUVC sold separately. Also, Sump Wrench (UCWRNCH) and Chrome faucet (UNFCTBL) sold separately. We suggest viewing the Installation Guide at the following link for complete details or simply scroll down the page to Info & Guides: https://images.homedepot-static.com/catalog/pdfImages/26/2674fead-4046-49d3-b521-b98a8331ba3b.pdf - Thanks for choosing GE Model # GX1S01R. Keep in touch at geappliances.com. Sue

how do you unscrew the top to replace filter

Asked by dude February 12, 2020
2
Answers

The top is mounted but the bottom simply unscrew by hand.

GX1SO1R water filtration unit is too small for all the filters that are supposed to fit. Why?

Asked by SV September 27, 2019
2
Answers

Hi sv - For FXULC and FXUVC filters, make sure the black seal that is at the top and bottom of the old filter is not stuck to the head or canister. The new filter has the same seals and doubling up even 1 side (top or bottom) can keep the filter from fitting correctly. For further assistance, please contact our SmartWater line at 1-800-952-5039. Keep in touch! Sue

I have a problem with the flow/volume from the unit and been reading the questions and answers to...

Asked by DD September 14, 2019
2
Answers

The sales rep said use the wound 5 micron filter instead of the smaller micron filter. I am on a well and my water pressure being lower seems in affected

Sump will not seal with filter installed.

Asked by Victor August 17, 2019
2
Answers

Too much talk from GE about the "Black seals" and not enough about the fact that the GX1S01R was made too shallow to accept "any" of the "C" style filters. I confirmed this at a home depot store a few days ago

I’m having an issue getting it to seal .... i bought the recomended “C” style.

Asked by Merks24 August 12, 2019
3
Answers

Make sure you check the filter seat is centered in the top base. This is a tight fit on purpose to seal. Put the filter in the base with the bottom bowl semi together and make the filter fit to the top base first and slid up the bowl and thread on by hand. Then use the spanner wrench to tighten. it will take a lot to get it to seal but it will seal. You may feel your going to break it but it should not. Its worth the results of clean water.

New system, new FXUVC filter in a newly remodeled kitchen. The sump will seal fine without the ...

Asked by SteveS August 2, 2019
5
Answers

Hi SteveS - We are sorry to hear of the leak. This is frustrating, we know. For FXULC and FXUVC filters, make sure the black seal that is at the top and bottom of the old filter is not stuck to the head or canister. The new filter has the same seals and doubling up even 1 side (top or bottom) can keep the filter from fitting correctly. If you need further assistance, please contact the SmartWater line at 1-800-952-5039. Keep in touch! Sue

I dont think its filtering. THere's no pressure drop like before.

Asked by Ts June 29, 2019
3
Answers

If it was originally installed correctly, it should be filtering. I would not concern myself with pressure drop, unless the pressure is an issue at the output faucet. ALL FILTERS will have dust from what they re made of either carbon/charcoal I think the filters actually got larger (not shorter) because of the brute force needed close & compress the rubber seals inside the filter with/without wrench - Personally I don't think you should need to apply that much pressure to close/open the canister

Single Stage Water Filtration System - page 2

Customer Reviews

  • 2.9
    out of 161 reviews
  • 43% recommend this product
5star-icon45
4star-icon30
3star-icon6
2star-icon13
1star-icon67
Filter by:
Showing 1-10 of 161 reviews
Defective design period.
Hooked everything up according to instruction. Ran it for about five minutes or so to clear out the line. Checked for leaks; everything fine. Wake up to flooded kitchen floor. Huge leak coming from the filter compartment. No matter how much it was replaced and tightened; it still leaked. Bad. DO NOT PURCHASE!
by Levar
Get all the parts!
This housing comes with mounting screws and nothing else. You'll most likely need 3/8 NPT fittings and a hose to run from the supply line to the housing, and use the existing line from the faucet to the housing. Also have some of the recommended silicone grease on hand for the filter o-ring gasket (making it slippery avoids leaks by dragging the thin o-ring). Assemble fittings and hoses to the housing and supply line before mounting and it's all easy.
by DallasNeal
Fine for what you pay for.
Got stuck installing this on New Years for my mother who didnt want want a double filtration system and didn’t want expensive replacement cartridges either. It didn’t come with the connectors so I included a photo of the brass fitting we used. It was obnoxious to install in a tight place and I had to tighten some of the connections after I hooked it up. Pros: Cost of the unit and filters. Cons: The brass connectors I used (once tightened) made it impossible to tighten the supply line as the nut was too close to the housing of the unit. Connect your supply lines to the brass elbows first, then screw the elbows to the unit. I STRONGLY suspect an oil strap wrench (nylon webbing kind) will be needed to replace the filter in 6 months. Note, this is not a verified purchase as my mother bought it and it’s not linked to my account.
by SciroccoMK1
brought the filter and housing brand new. tightened correctly still huge leak, opened it up and t...
brought the filter and housing brand new. tightened correctly still huge leak, opened it up and the filter plastic cracked. the filter does NOT FIT
by yl
5 people found this helpful
dont buy it
Bought housing and filter and after few months went to change the filter.. Thenew filter is longer and will not let the unit seal. I thought i had a defective filter returned home with a new one and again the replacement side by side is 1/4 inch too long... save your self the aggrivation and move on to a better unit.. I have to see if Hone Depot will refund my whole purchase now a few months have past.
by Robot0
5 people found this helpful
So far so good ice taste great water taste great easy to hook had an older system in there just t...
So far so good ice taste great water taste great easy to hook had an older system in there just took it all out put this one filter system in changed my refrigerator filter and I'm in business my water and ice taste great love this new system!!!!!
by Troy
I love it, it’s important to me to get filtered...
I love it, it’s important to me to get filtered water and not to pay for bottles. My only complaint is having to change filters every 6 months.
by RITA
replacement for previous filter...
replacement for previous filter
by HomeDepotCustomer
I gave this a 5 star only after a lot...
I gave this a 5 star only after a lot of sweat and toil. Originally installed and leaked like a sieve. The rubber gasekets are too thick, at least on the filter cartridge I also purchased. Called GE and they advised returning, but I wasn't ready to give up. I was fortunately having available some neoprene rubber to cut some custom gaskets less thick than the ones supplied with the filter. This is basically a good product but GE doesn't seem to have a clue. You need thinner rubber filter gaskets to allow a good seal to the O-ring between canister and upper housing. My unit, now with thinner gaskets, seals well. Be careful, you do need adequate filter rubber gasket thickness to ensure the water supply is not by-passing the filter and is going through it. I really feel GE owes me some compensation for all the work and experimentation I've done !!
by HomeDepotCustomer
Response from GE AnswersFeb 24, 2021
Hello and think you for sharing your experience with your water filter. We appreciate your feedback and hope everything is working well for you. It is disappointing to hear about the gaskets on the filter you chose. If this was an approved GEA filter for this filter housing, please reach out to us on our Contact Us page or social media. Thanks! - John@GEAppliances GE_Appliances
Easy installation and works perfectly...
Easy installation and works perfectly
by Vivi
Showing 1-10 of 161 reviews