#1 Home Improvement Retailer

1/4 in. Drive Torque Screwdriver 1-6Nm

$15413
Apply Now
Pay $129.13 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Torque Screwdriver with co-molded comfort grip
  • Features quick release 1/4in. bit holder for increase effeciency
  • Confidently backed by a Limited Lifetime Warranty
Store
0 in stock
Text to Me
caret

Product Details

High precision torque screwdrivers with co-molded comfort grip handle. High visibility scale. Quick release bit holder.
  • Manifest a futuristic effect with the Kylo LED collection 1-light matte black frosted glass LED modern hanging pendant light ideal for any foyer, dining room, kitchen, breakfast nook, entryway, living room, or stairway
  • Torque accuracy of plus/minus 6% CW
  • Locking adjustment collar allows for easy setting of desired torque setting
  • Quick release 1/4 in. bit holder
  • Scale markings are highly visible and easy to read
  • Solvent resistant co-molded handle for comfort and durability
  • 1-year limited warranty, calibration accuracy warrantied for 90-days
  • Ready to Forge Ahead? Click here to view more GEARWRENCH products.
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?
caret

Customer Reviews

4.6 out of 5
(22)
  • 4.6
    out of 22 reviews
  • 91%recommend this product
Filter by:
Showing 1-10 of 22 reviews
Not insulated
[This review was collected as part of a promotion.] Right off the bat, this tool is for electrical work. While GEARWRENCH equals automotive tools, this particular one isn't intended for automotive work. Still, torque screwdrivers are an important tool. Properly torqueing down connectors in a panel is very important. Having your connections too loose or too tight is a recipe for problems. Unfortunately, this tool just doesn’t make the grade. It is NOT insulated. Everyone should use insulated tools when doing electrical work, no matter how experienced you are. The build of the handle is solid, but you risk exerting too much torque with it. I’m not sure about the ¼” pass through feature and I would never use a torque tool to break a stuck fastener. Also, the pass through seems like overkill. One can only apply the max of 6 NM which is only slightly under 4.5 ft/lbs… you really have to be careful. Lastly, I wish the torque markings were etched on. Should the paint rub off, it would be very difficult to use the tool.
by
    Tighten fasteners with confidence
    [This review was collected as part of a promotion.] I have used the Gearwrench torque wrench on multiple fasteners. It locks on 1/4 inch hex bits with an easy pull of a collar. Setting torque is achieved by compressing the straight knurled ring and rotating the trilobular handle. Torque can be adjusted from 1-6 Nm (8.8-53.1 lb in) in .1 Nm increments. You can torque fasteners clockwise until the grip cams about 60 degrees in rotation confirming your setting has been reached. Finally a quality feeling tool that gives you confidence to torque smaller fasteners to specification.
    by
      • Recommended
      Wish I Had One Sooner
      [This review was collected as part of a promotion.] This has proven to be a indispensable tool. I keep finding more and more uses for it. It is a must for electrical work not having to guess the torque settings on breakers and neutral bars along with other fittings. As for plumbing being able to precisely tighten well pump clamps as to not over or under tighten is great. The fact that it takes interchangeable and replaceable bits is a big plus and the driver can eject the bits for quick easy changes. Unlike a click type torque driver you cant over tighten with this one because of the cam action a real +++. The adjustment scale is very easy to read and to set along with the handle being of a comfortable and soft grip. It come in a nice storage case that holds it secure. This is a Great Tool and I only wish I had one sooner.
      by
        • Recommended
        This can save you in frustration alone
        [This review was collected as part of a promotion.] I sometimes work with electrical connections on circuit boards and with soft parts such as nozzle on 3d printer. It is easy to strip a brass part in an aluminum block making for a really bad day or destroy a connector on a board that cost a few hundred dollars. When the torque is less then 50 inch lbs it is hard to tell the difference in too tight and too loose even more so when you take vibration in consideration. While this is not a tool for everyone it is a tool that more people should have and probably would have if they even knew it existed I for one will make sure I am never without it. As to a review vs other torque screwdrivers I have used this one is the nicest one I have tried. The soft grip handle makes the screwdriver comfortable in your hand. The socket for a 1/4 drive ratchet can be handy if your on the upper end of the torque or just feel more comfortable with a ratchet. The settings are easy to read and it comes with a nice case with padding that saves it from be banged around in your toolbox.
        by
          • Recommended
          Very surprised
          [This review was collected as part of a promotion.] Normally when it would come to buying a torque product I would completely overpay thinking that it would lead to some “superior quality”. This Gearwrench torque screwdriver is as quality as it gets. It feels well built, and is very comfortable in the hand to use. This lower torque model is perfect for precise low torque use on any applications in my opinion(especially aluminum work) and is a pleasure to use. The 1/4 driver on the end cap of the handle offers even more leverage and controllability.
          by
            • Recommended
            Very Nice!!!
            [This review was collected as part of a promotion.] Really happy with the build quality and features. The torque setting is very easy to change with 1/10 increments in between. The locking collar keeps the bit in place (I could not pull it out by hand) and ejects the bit when you intentionally push the collar forward. The quarter inch drive slot in the rear of the handle is a very nice addition that I did not expect to see.
            by
              • Recommended
              Awsome product
              [This review was collected as part of a promotion.] Ended up getting this a couple weeks ago, finally had a couple jobs come up were I was able to put to the test! First off let me tell you that this thing is second to none. Once again GearWrench exceeded my expectations. The truly do a remarkable job on their products. If your looking for the perfect torque screwdriver then look no further! The price is right for the quality and craftsmanship put into this unique torque screwdriver. Had a coworker just order his own off line and ill be getting one more as well to keep at the house! Keep your nose on the grindstone folks...Johnny D.
              by
                • Recommended
                Unbelievable Quality
                [This review was collected as part of a promotion.] I’ve taken my time reviewing this Torque Screwdriver. As Snap-on being my main brand, I just can’t believe the quality of this Gearwrench tool. The feel of it in the hand is actually nicer than the other brand. It is also very precise in the settings. I’m actually turning to the Dark Side of tool brands.
                by
                  • Recommended
                  Great to have in toolbox.
                  [This review was collected as part of a promotion.] highly recommend this little tool. I have put together quite a few projects and this was a big help. It is nice to be a bit more accurate with the torque on screws and bolts. this little tool may save you the trouble of stripping out screws on A/C units.
                  by
                    • Recommended
                    Very well made
                    [This review was collected as part of a promotion.] This is a great tool so far. It comes with a great conversion chart for switching to inch lbs. Everything from class 8 trucks to working on firearms makes it awesome. The people at gearwrench really have their stuff together. I can't wait to see what they have coming out later in the year.
                    by
                      • Recommended
                      Showing 1-10 of 22 reviews

                      Frequently Bought Together

                      +
                      +
                      Price:
                      $15413