Hello, Can i use it with a Driveway Roller Pole?
I had previously leveled spots with Top& Bond aconrete product will your product cover these spots??
The label says 300 to 350 ft.², but all the blog posts I read said it was more like 200 to 250 ft.². The 250 ft.² was accurate for my driveway, but it was pretty pitted and rough so it’s soaked up a lot.
50-58 lbs weight.
Not very well, you will want to pretreat the slippery spots, with dawn dish soap or something stronger. I used dawn and a pressure washer and that worked fine. Make sure you give the driveway time to dry before apply coating.
Definitely a rubber squeegee. Don't waste your time with a roller. Squeegee works perfect. Store the buckets upside down and stir with a stick when ready to use, then dump a gallon right on the asphalt from the bucket and squeegee. It is super easy. Don't paint yourself into a corner. lol
1/8" is not a problem, 1/4 inch or bigger I would use crack filler/driveway caulk first, then apply this stuff.
Sure can, just remove any loose debris.
Yes, make sure application temps are above 65 or even above 70 for best results. Apply in morning on a clear dry day.
Home Depot offers special pricing on occasion, so buy the best you see fit.