The 10 ft. Vinyl Arch Drywall Corner Bead conforms to almost any radius. It features Y-shaped slits on the notched flange to allow for flexibility without kinking. Vinyl Arch Corner Bead has a tough, rust and dent resistant design that offers superior joint compound adhesion for optimal performance. This Arch Corner Bead can be installed using nails, staples ot drywall adhesive.
NOTE: You will need to pick up a can of 3M drywall corner bead adhesive to properly install this.
This bead easily conforms to any arc in construction. It has a small lip to use for leveling your mud against as with standard metal corner beads.
Clean the surface thoroughly so no loose debris. Cut the length and angles on the ends according to your needs. Spray both the bead and the surface with the adhesive spray and be careful to avoid any overspray onto other objects. In one to three minutes check the adhesive on the wall to ensure it has a tack but no liquid transfers to your skin. Once the tack is achieved press it into place and follow up by nailing or stapling it ever few inches. Once that is done it will be ready for mud once the adhesive dries.