1 qt. Pump Armor Fluid

Hello Mark, Please call the Graco technical support team at 844 241 9498 M - F 7:30 am to 5 pm CST. Thank you, Graco Technical Support

The Prox 17 can spray non flammable oil based materials out of the box. If you would like to spray flammable oil based materials you'd need to purchase and install a lacquer conversion kit. If you have any additional questions please feel free to give us a call at 844-241-9499. Thank you, Graco Support Team

Hi ming, As long as you've stored the pump with pump armor in it you shouldn't have issues when you go to use the sprayer again. If you run into any issues please feel free to give us a call at 844-241-9499 so we can help troubleshoot. Thank you,

Hello Ogfarmerdan, You will need to contact the backpack sprayer manufacturer to confirm if it can be used. Thank you, Graco Technical Support

Hello, Yes, we do recommend flushing the pump armor out before using your sprayer. Thank you, Graco Technical Support

Clean it out with water. Same as you do when cleaning out the pump at the end of the day or job.

Then put water and wash it out

you just purge it thru as you prime the hose and gun assy. the pump saver fluid Is not an oil. it is a (non harmful) glycol base

It's water soluble, just hook your garden hose up to the intake hose and flush it out until the water comes out clean.

I’m sure it would, it works awesome in my Graco X7

You can use it with any sprayer>

It can be use on a wagner airless sprayer

It will work for Wagoner’s sprayers

I would say yes. if it sucks up and sprays paint it is a safe and useful product.

Hello RJ, Thank you for your question. We offer some videos on how to apply the pump in our various sprayers. https://www.graco.com/us/en/homeowner/support/education-center.html If you need further assistance the technical service group can be reached at 844 241 9498 M - F 7:30am to 5:30pm CST. Thank you, Graco Technical Service Group

Goes on the inlet hose after you clean the system, place the pump armor bottle on the inlet hose set it in prime position let it run into you see the fluid coming out from the prime hose and turn it off disconnect the electrical cord, set it up into a spray position replace the inlet strainer and put a bag on the hoses for any dripping and use it every time to keep the system running like new it doesn't take alot of the fluid usually two ounces or less

there is a video > https://www.youtube.com/watch?v=fogeVCHeRO0

Fill a can about 1/2 full have the sprayer draw it up

It is biodegradable, please use fresh every time

You can flush it out with cleaner flowed by clean water

Thank you for your question on the 1 qt. Pump Armor Fluid. This should be used in the unit for any length of storage longer than 48 hours. If you have any further questions please reference 109568 and give us a call 844 241 9498 M - F 7:30am to 5:30pm CST. Thank you, Graco Technical Service Group

You can use it between uses if you really wanted to. It’s essentially just going to lube the pump and keep your gaskets and stuff in the best condition they can be in. So to answer your question Yes you can use it if the down time is so short as it won’t hurt anything and can only help prolong the life of the pump and gaskets.

I would at least every other time. It helps just like antifreeze does for your water pump in your car.

No, that shouldn’t be necessary for that short a time. But if you don’t use it for more than a few days, don’t forget to put some in.