
Return this item within 90 days of purchase.
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
The TrueAirless Spray Tip with SoftSpray Technology delivers a softer spray finish to make it easier to deliver a professional quality finish. Achieve greater control and less overspray on different surfaces with a wide range of materials from stains to exterior paints. Use Genuine Graco TrueAirless Spray Tips to get the quality finish you demand.
Accessory Type | Spray Tips & Tip Guards |
|---|---|
Applicator/Tool Type | Paint Sprayer |
Compatible Paint Type | Exterior Paint, Interior Paint, Primers, Sealers, Stains |
Fits brand/model | Graco TrueAirless Project Painter Plus, X5, X7, ProX17, ProX19, ProX21 |
Kit | No |
Paint Sprayers Product Type | Accessories |
Returnable | 90-Day |
Spray Tip Pattern Size (in.) | 10(in) |
Spray Tip Size | 515 |
Manufacturer Warranty | 1 year limited warranty |
|---|
Depends on the tip orifice size and the stain, paint or primer you plan to use. Specifications are located on the back of the can. The smaller the number for the orifice size in the tip that will be a smaller orifice size adequate for the recommendation specification. Please feel free to call us at 844-241-9499, if you have any further questions. Thank you, Graco Technical Support Team.
Hello, If that .011 orifice size it the size that the coating recommends to use for that particular coating then yes it will work on the X7. Thank You Graco Technical Support.
Hello, I am not familiar with the Sparyit Pro 21 unit. Thank You Graco Technical Support.
This tip is not compatible with the Magnum X5 sprayer due to the tip orifice size. The orifice size of the tip is .021in, which is more than the Maximum tip orifice size for the Magnum X5 sprayer (.015in). It does fit; however, we DO NOT recommend using this size as wear issues of the pump will occur and require replacement of the pump. Please feel free to call us at 844-241-9499, if you have any further questions. Thank you, Graco Technical Support Team.
Based on the Behr Barn & Fence paint technical data sheet (NO. 35 BARN WHITE), it recommends a "Tip: .015"- .019" and for Thinning: If required, thin with water at a rate of no more than 1/2 pint per gallon". A 515 tip could work however, if you get a bad spray pattern you will need to use a .017in or .019in tip. Please feel free to call us at 844-241-9499, if you have any further questions. Thank you, Graco Technical Support Team.
Depends on the specifications on the interior paint you are using. We have tip sizes that are compatible with paint, stains and primers. Our smallest orifice size is .006in. Please feel free to call us at 844-241-9499, if you have any further questions. Thank you, Graco Technical Support Team.
Hello Vince, All coatings will have an orifice tip size recommendation under the "APPLICATION" section on the label of the coating. Check there for the orifice recommendation. Thank You Graco Technical Support.
Hello Redd, It would depend on the particular Kilz. Check the label of the Kilz under the "APPLICATION" section. You will find that information there. If you cannot find that information there then you will want to contact the manufacturer to inquire about the airless orifice tip size. Thank You Graco Technical Support.
Viewing 1-8 of 130
4.6 out of 5