Panels are but power house depends on charge controller
Panels will generate 31 volts DC with sun shine. Most grid tie inverters will not generate without grid power
permits, planning. electrician. or have a solar company install.
These panels are intended to use with a charge controller. You will have to reach out to your generator manufacturer to see if the generator can accept the solar panel voltage and current. Voltage at Maximum Power Point Vmpp: 32.48 V Current at Maximum Power Point Impp: 9.24 A Open Circuit Voltage Voc: 40.45 V Short Circuit Current Isc: 9.91 A
yes same way as it were a brick and mortar home
The panels do not have built-in inverter.
You may want to complete the normal roof first, then use the rail system so that you can park a vehicle.
@24volt operation = 8 x 6 amps. ~ 48 to 50 amps capabilty , also an inverter handling (50 x 24vdc ) 12 kw. Output .
There are multiple factors to consider when sizing a charge controller, the main one being system voltage. The storage capacity of a battery bank is more important than the quantity of batteries. Multiply your total panel wattage by six (6) and then divide by your system voltage to get the suggested Amp-hour capacity of your battery bank. Reach out to email@example.com for assistance with sizing your system.
12kwh=12,000 wh. this pack comes with 4, 300 watt producing panels which works to 1,200. 12,000/1200=10 packs