The Guardian large capacity, 12,000 lbs. per-axle, 2-channel portable cable protector ramp runs along shop and warehouse floors to protect important power cables from vehicle traffic. Each piece has interlocking connectors to span various lengths of cables. Protects cables, wires, and hoses up to 1.125 in. Dia from vehicle traffic in the warehouse or outside. Suitable for vendor booths at amusement parks and festivals to eliminate accidental tripping over wires. Heavy-duty modular rubber allows multiple cable ramps to be connected together. Optional corner pieces are available separately to allow bending or snaking of the cable protector around building corners, electric poles, and equipment.
Straight middle cable protector cover protects cables, wires, and hoses up to 1.125 in. D from warehouse vehicle traffic indoors or outside
Measures 1.125 in. x 1.125 in.
Maximum 12,000 lbs. weight capacity (6,000 lbs. per tire)
2-channels for cables and wires
Operating temperature is minus 40° F to 131° F
Modular design, connects to straight piece (DH-CP-5) or 22.5° turn piece (DH-CP-5R, DH-CP-5L)
Heavy-duty thermoplastic rubber with a highly visible yellow safety lid
2-Channel Drop-Over Cable Protector Ramp for 1.375 in. Dia Cables
The Guardian 2 channel drop-over cable coverThe Guardian 2 channel drop-over cable cover and concealer protects cords, cables, wires and small hoses from vehicle and pedestrian traffic. Each cable snake cover features two 39.625 in. L x 1.375 in. W x 1.375 in. H channels, a high-traction skid-resistant surface, and a modular configuration for connecting multiple cable ramps together. Suitable for use outdoors, in the garage, office, theme parks, or in commercial warehouses. Rated maximum load capacity of 2,000 lbs. per tire or 4,000 lbs-per-axle. Made with heavy-duty, commercial-grade rubber construction. Please note that multiple ganging cable covers might be required to span the width of your desired area.View Full Product Description
3-Channel Drop-Over Cable Protector Ramp for 1.375 in. Dia Cables
The Guardian 3-Channel Cable and Hose ProtectorThe Guardian 3-Channel Cable and Hose Protector Ramp is instant drop-over cable, wire, and hose protection for the shop, warehouse and more. It features 3 channels, each measuring 1.375 in. x 1.375 in. for protecting lines from vehicle traffic. The modular design allows multiple ramps to be connected together in series. Maximum 4,000 lb. capacity per axle (2,000 lbs. per tire), made with heavy-duty commercial grade rubber.View Full Product Description
5-Channel Rubber Cable Protector Ramp for 1.25 in. Dia Cables
The Guardian Cable Ramp protects valuableThe Guardian Cable Ramp protects valuable cables and cords up to 1.25 in. D from heavy traffic. It's constructed of rubber with a ribbed surface for foot and wheel traction. The protector has 5 1.25 in. channels and features a 24,000 lbs. per axle capacity. The lid has safety symbols molded into the surface and is yellow for higher visibility. On either ends of the ramp are male and female connectors allowing you to connect multiple ramps together to fit your application needs. Each ramp has 2 molded handles and also cutout holes on the 4 corners for more permanent applications.View Full Product Description
3 ft. L 3-Channel 2.5 in. Industrial Rubber Cable Ramp
The commercial-grade rubber Guardian cableThe commercial-grade rubber Guardian cable ramp protects up to 3 cables, hoses, or wires from damage caused by heavy vehicle and industrial traffic. This cable protector has three channels that can accommodate cords measuring up to 2.5 in. O.D. The ramp features a commercial-grade rubber base with a hinged PVC lid, allowing it to support up to 24,000 lbs. per-axle. Connect multiple Guardian cable ramps together using the interlocking male and female T-connectors to cover long cable runs. A diamond tread pattern on the surface of the ramp provides enhanced traction for vehicle and pedestrian traffic. Operating temperature from minus 40° F to 131° F.View Full Product Description