Model # THD80

Internet #300276095

Gutter Guard by Gutterglove 4 ft. Stainless Steel 5 in. Micro-Mesh Gutter Guard (20-Pack)
0855276003800

Gutter Guard by Gutterglove

4 ft. Stainless Steel 5 in. Micro-Mesh Gutter Guard (20-Pack)

  • Stops leaves, pine needles and debris from collecting in gutters
  • V-Bend Technology ensures superior rainwater filtration
  • Fits both 4 in. and 5 in. gutters
$ 169 97
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

+

Product Overview

  • Stops leaves, pine needles and debris from collecting in gutters
  • V-Bend Technology ensures superior rainwater filtration
  • Fits both 4 in. and 5 in. gutters
Gone are the days of climbing up ladders to clean your gutters. Ideal for both commercial and residential applications, this Gutter Guard by Gutterglove keeps out leaves, pine needles, roof sand-grit and other debris from your gutter. The patented V-Bend Technology (VBT) design allows the system to filter rainwater more effectively than other gutter covers. There are no support mechanisms needed under this high performance VBT stainless steel micro-mesh gutter protection system. This allows 100% of the holes to filter rainwater coming down your roof and into your gutter.
  • Covers 80 ft. of gutter
  • Patented design that is easy to install by fastening and or with 3M VHB tape
  • Patented V-Bend Technology filters rainwater significantly better than its competitors
  • Each piece is 5.5 in. wide x 4 ft. long and can be used on 4 in. and 5 in. gutters
  • Oversized stainless steel micro-mesh wire for superior strength and durability
  • Innovative design prevents debris from building up in gutters
  • UL approved for rainwater harvesting (NSF P151 and NSF 372)
  • Average home has 160 ft. of gutter

Product Overview

  • Stops leaves, pine needles and debris from collecting in gutters
  • V-Bend Technology ensures superior rainwater filtration
  • Fits both 4 in. and 5 in. gutters
Model #: THD80
Internet #: 300276095

Gone are the days of climbing up ladders to clean your gutters. Ideal for both commercial and residential applications, this Gutter Guard by Gutterglove keeps out leaves, pine needles, roof sand-grit and other debris from your gutter. The patented V-Bend Technology (VBT) design allows the system to filter rainwater more effectively than other gutter covers. There are no support mechanisms needed under this high performance VBT stainless steel micro-mesh gutter protection system. This allows 100% of the holes to filter rainwater coming down your roof and into your gutter.

  • Covers 80 ft. of gutter
  • Patented design that is easy to install by fastening and or with 3M VHB tape
  • Patented V-Bend Technology filters rainwater significantly better than its competitors
  • Each piece is 5.5 in. wide x 4 ft. long and can be used on 4 in. and 5 in. gutters
  • Oversized stainless steel micro-mesh wire for superior strength and durability
  • Innovative design prevents debris from building up in gutters
  • UL approved for rainwater harvesting (NSF P151 and NSF 372)
  • Average home has 160 ft. of gutter

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Gutter Size
5 in.
Product Depth (in.)
47.5 in
Product Height (in.)
0.375 in
Product Width (in.)
5.5 in

Details

Color
Stainless Steel
Color Family
Stainless Steel
Compatible Gutter Profile
Universal
Features
Snap/Lock-In
Gutter Part Type
Gutter Guard
Gutter System Product
Gutter Guard
Material
Steel
Product Weight (lb.)
.08lb
Returnable
90-Day
Style
Snap/Lock-In

Warranty / Certifications

Manufacturer Warranty
10 years extended to 25 years with registration

Specifications

Dimensions

Gutter Size
5 in.
Product Depth (in.)
47.5 in
Product Height (in.)
0.375 in
Product Width (in.)
5.5 in

Details

Color
Stainless Steel
Color Family
Stainless Steel
Compatible Gutter Profile
Universal
Features
Snap/Lock-In
Gutter Part Type
Gutter Guard
Gutter System Product
Gutter Guard
Material
Steel
Product Weight (lb.)
.08lb
Returnable
90-Day
Style
Snap/Lock-In

Warranty / Certifications

Manufacturer Warranty
10 years extended to 25 years with registration

Questions & Answers

The Gutter Guard doesn't have an aluminum support / "rib" system like the GutterGlove Pro. What...

The Gutter Guard doesn't have an aluminum support / "rib" system like the GutterGlove Pro. What will prevent heavy snows from depressing / bending in the surface of the mesh?
Asked by: Rosewood
You can use hidden gutter spikes to stiffen the gutter between existing spikes and provide extra support. SOme competing steel mesh gutter guards use a stainless clip that they insert by hand into the gutter and it locks in place inside front gutter lip. But I not sure where these are available.
Answered by: richard
Date published: 2018-10-09

Can they be painted to match the trim and gutter which matches the house trim.

Can they be painted to match the trim and gutter which matches the house trim.
Asked by: Bill
Yes but you could easily clog the grates.
Answered by: BobO
Date published: 2019-01-17

how is it cut to fit? I need 240' is it sold in bundles of ten?

how is it cut to fit? I need 240' is it sold in bundles of ten?
Asked by: bob
These are 4-foot lengths in a box of 20. You can buy individual pieces but only 3-foot lengths and much more expensive. Each piece can be cut pretty easily with tin snips to cut off ends and odd corners.
Answered by: rodmitch
Date published: 2019-01-22

How does this screen handle pine needles? Anyone has experience?

How does this screen handle pine needles? Anyone has experience?
Asked by: shawn
The screen is so fine even pine needles will not get stuck in them and can be easily brushed or blown off!
Answered by: Bob
Date published: 2019-02-05
  • y_2019, m_4, d_25, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_129
  • loc_, sid_300276095, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms
  • QUESTIONS, PRODUCT

Customer Reviews

4 ft. Stainless Steel 5 in. Micro-Mesh Gutter Guard (20-Pack) is rated 4.8 out of 5 by 1987.
Rated 4 out of 5 by from Overall I'm happy with the product. It was easier to install than I feared when I first opened t... Overall I'm happy with the product. It was easier to install than I feared when I first opened the box. The installation instructions are pretty good and the online installation videos are great. I would not rely on just the adhesive to do the install. I was nervous about drilling into my new gutters, but I think the screws are a critical component of the install. The quality of the product is amazing. I have two critiques. First the obvious, this product is not cheap. I have brand new gutters and downspouts and hate to get on the ladder to clean out my gutters so I wanted something that looked like it would prevent me from ever having to get on a ladder again. For that level of confidence I justified the extra expense. The other critique is that the holes in the mesh are very fine. I've seen the water skim across the fine holes and go over the edge. This issue is something I'm going to keep an eye on because on some rains I don't see anything coming over the edge.
Date published: 2019-04-09
Rated 5 out of 5 by from Product was delivered to my home in the expected timeframe and all boxes were delivered well pack... Product was delivered to my home in the expected timeframe and all boxes were delivered well packaged and undamaged. The product is designed well and was relatively easy to install. I did not use the adhesive tape to install to the gutter but did check it out and it was extremely sticky. The provided self tapping screws and nut driver were a plus, I used 3 screws for each 4ft. section and there were plenty of extra screws leftover after each box was installed. I installed them underneath the shingles and the guards were easy to bend and manipulate into position. Make sure you follow the directions to bend the front of the guard to create a valley towards the front to capture heavier water runoff. You might want to also use some type of diffuser to distribute the heavier water flow in the roof valleys to keep it running into the gutters. So far I am very pleased with the gutter guards, they performed as avertised and are well made quality product.
Date published: 2019-04-14
Rated 4 out of 5 by from These gutter guards are the best value for regular homeowners to buy without breaking the bank. T... These gutter guards are the best value for regular homeowners to buy without breaking the bank. The quality is good, but the frame is not as rigid as the more expensive professional options. The price for this fluctuates on HD, but the total cost is a fraction of what professional options cost. I examined the professional options when they provided quotes and they have a secondary support structure below the micro mesh. Gutterglove Pro is an example of that design, but for my purpose I am happy with the Gutter Guards that are easily ordered at HD. Shipping arrived very quickly direct from the supplier. Each box came with the required screws and bit to install. Instructions were clear and easy to follow. I hope they last a long time before requiring cleaning and I hope brushing is easier than scooping out all the debris that standard gutters accumulate.
Date published: 2019-04-06
Rated 4 out of 5 by from I found these easy to install and they seem very versatile. Provided instructions are very comple... I found these easy to install and they seem very versatile. Provided instructions are very complete and good. Included screws and drill bit were appreciated. I looked at a lot of gutter guards and these were the best value in DIY guards. I replaced some vinyl guards that eventually collapsed and distorted from heavy snow. I think these are rigid enough that they will not have that problem. I installed them last fall and we've had a lot of snow this winter and they have held up, but when the snow begins melting it will drip over the edge and form icicles. You might want to consider adding a roof frost heating system if this is a concern. I have not been through the Spring-Fall seasons yet, so I can't say how they will perform with rain runoff and debris buildup, but in tests with a hose they seem to work well with water flow. Not having been through a full year is the only reason for not giving 5 stars.
Date published: 2019-03-17
Rated 5 out of 5 by from High Quality Gutter Guards I live in a very wooded area beside a lake. I’ve always had problems with leaves in the gutters. I bought these after looking around at different products. What sold me on these was the fine mesh and easy installation. I had 150 feet of gutters to cover. I have 2 long stretches that have a few low spots where water can sit. I have had problems with mosquitoes breeding in these areas. This mesh is so fine they cannot get in or out. The pitch of my roof is very steep in a few areas. After a few really hard rains, these gutter guards performed really well. It handled all the water without any running over. The only issue I have with these guards is they do not connect very flush with other pieces. There is a very small gap in between sections. I used needle nose pliers to bend the sections toward each other. Other than that, these gutter guards will be on my house for years. I am very satisfied with them.
Date published: 2019-04-20
Rated 5 out of 5 by from Bought this 20 pack a few months ago and installed a 20 foot section to see how they worked. See... Bought this 20 pack a few months ago and installed a 20 foot section to see how they worked. Seem to work great although we have not had a lot of rain. My long term goal is to put these on all of my gutters so I don't have to climb on the roof very often to clean. Too dangerous. I have heavy 50 year tri laminate shingles on the house which makes the installation a little more difficult since trying to slide the front edge under the tiles is tough. I use a flat crow bar to help. Once that is done, screwing in the 3 screws per section is easy enough (I don't use the tape). I plan to hire someone to install the gutters above the 2nd floor since that is too scary for me. Probably 70% of my gutters are above the first floor which I can easily get to with a ladder from the ground.
Date published: 2019-02-03
Rated 4 out of 5 by from Product actually looks to be constructed of the best quality materials that I have seen thus far.... Product actually looks to be constructed of the best quality materials that I have seen thus far. Installation was straight forward. Gutter guards are only up on the back of my home for about 3 weeks now and has seemed to let rain through just fine. We have wetlands behind our home (mostly leafy trees) and it`s winter here in SC and most of the leaves are no longer on the trees so we will have to probably have to wait until next season to truly test them. I am also installing them on a neighbors home that has mostly tall pines around to see how well they keep pine needles from gathering in or getting stuck in the gutter guards. Only thing is that I wish they would of had these in 8 or 10 foot options also.
Date published: 2019-02-04
Rated 5 out of 5 by from Best quality gutter guard I have seen. Made with stainless steel superior strength and durability and a great design by Gutterglove Inc. The stainless steel micro-mesh gutter protection systems for residential applications is the best I seen in thirty plus years. I have installed and removed several different product because they created more problems then solved. Gutter Guard by Gutter Glove innovative design prevents debris build up in gutters, keeps out leaves, pine needles, roof sand-grit, and other debris from gutters. I should never have to climb up a ladder again to clean my gutter guards. The design allows 100% of the mesh holes to filter rainwater coming down your roof and into your gutter, whereas all others gutter guards, are designed to block as much as 60% of the holes constantly catching debris. I used two boxes of 20 (40 x 4ft) to cover my 160 ft. gutter runs. Very easy to install, I did use the included 3M VHB tape to attach, figuring I could always screw it down later if needed (the screws are also included). Very satisfied with this product.
Date published: 2016-12-01
  • y_2019, m_4, d_25, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_1986
  • loc_, sid_300276095, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 43ms
  • REVIEWS, PRODUCT