Top Rated

Return this item within 90 days of purchase.
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
The Halo HLB6 Selectable 4-Pack is a complete ultra-thin direct mount downlight that offers you the option of choosing your color temperature directly on the fixture. with the flick of a switch, you can choose between 3 color temperatures ranging from soft (3000K) to daylight (5000K) prior to installing into your ceiling. This module is designed for use in new construction, remodel and retrofit installation, without needing a housing or j-box. This product features an LED driver that offers 120-Volt dimming capability. The HLB6 soft lens provides uniform illumination and wet location listing.
Nominal Size (in.) | 6 in |
|---|---|
Product Diameter (in.) | 7 in |
Product Height (in.) | 1.26 in |
Actual Color Temperature (K) | 3000, 4000, 5000 |
|---|---|
Color Temperature | Daylight |
Color/Finish | White |
Color/Finish Family | White |
Commercial/Residential | Residential |
Damp/Wet Rating | Wet Rated |
Dimmable Capability | Dimmable |
Features | No Additional Features |
IC Rating | IC Rated |
Included | No Additional Accessories |
Indoor/Outdoor | Indoor |
Light Bulb Type Included | Integrated LED |
Lumens | 900 |
Material | PVC |
New Construction or Remodel | New Construction, Remodel |
Pack Size | 4 |
Returnable | 90-Day |
Trim Style | Ultra Thin |
Voltage (V) | 120 V |
Watt Equivalence | 0 |
Wattage (W) | 12.5 W |
Certifications and Listings | Energy Star, cULus Listed |
|---|
Thank you for your question! Please note that we do not have exact hole saw size recommendations, but the ceiling cutout size should be 4.18” [106mm]. Please refer below spec sheet for more details: https://images.thdstatic.com/catalog/pdfImages/92/92e7f1b4-77fa-4e0f-ac0a-0b2f97928ce6.pdf
Thank you for your question! This will depend on the reflective surfaces on the field, but in general, setting your HLBSL6 lights to 3000K should give you the most natural‑looking white on your walls.
The flickering of your HLBSL4069FS35 light could indicate several potential issues, such as: Driver or Electrical Issue: Flickering may result from a failing driver or inconsistent power supply. Ensure the connections are secure and the power supply is stable. End of Life: If the light has been in use for a long time, it might be nearing the end of its lifespan. The HLBSL series is designed for long-lasting performance, but all LEDs eventually degrade. Dimming Compatibility: If the light is connected to a dimmer, ensure the dimmer is compatible with the HLBSL series. Incompatible dimmers can cause flickering. Warranty Coverage: The HLBSL series comes with a five-year limited warranty. If the product is still under warranty, you may be eligible for a replacement or repair.
Thank you for your question! Please note that the fixtures may feel hot to the touch. All components in the unit are rated for 90 °C. Ensure that the fixture is connected only to a 120 V, 60 Hz power supply. This is an IC-rated light fixture, so insulation contact will not contribute to any additional heating of the fixture.
Thank you for your question! Please note that the Halo fixture model #HLBSL4069FS351EMWR consumes a maximum of 10.2 W of power. Considering an 80% load on a 120V, 15A circuit, you can safely connect up to 141 fixtures on a single circuit.
Please note 1EMWR in the model no HLBSL4069FS351EMWRstands for: 1. 1E: Electronic driver (120V 60Hz, Leading Edge & Trailing Edge, phase cut 10% dimming) 2. MW: Matte white finish 3. R: Recyclable packaging
Yes, the HLBSL4069FS351EMWR fixture is wet location listed and suitable for installation in shower ceilings. It meets the necessary standards for use in areas exposed to moisture.
Please note that there is no reset button on the fixture. But the driver does have a thermal cut off that turns the fixture off it is operating too hot. Please troubleshoot using below steps: 1) The fixture is rated for 120V 60Hz supply, make sure you are using operating the fixture on the supply with same ratings. 2) If you are using a dimmer switch, please confirm the compatibility with the dimmer manufacturer. 3) Check for loose connections or damaged wiring that might be causing fixture to overheat. 4) Check if the insulation is tightly compressed around the fixture. Loosen it or create a small gap for better air flow to help the fixture cool down. This fixture is not recommended to install in direct contact with spray foam insulation. 5) This fixture is rated for -30℃ to +40℃ ambient temperatures. Make sure it is not installed near hot object or in hot environments. If none of the above troubleshooting works, contact Retail Support @ 800-334-6871 Mon-Fri 8AM to 12PM and 1PM to 5PM (EST) for more troubleshooting and warranty claims.
Viewing 1-8 of 192
4.6 out of 5