#1 Home Improvement Retailer

Internet #303652568

Model #AC43

Store SKU #483048

43 in. Steel Roller Stand with Edge Guide

$2497
  • Loading capacity of 250 lbs.
  • Features flip up edge guide for stock alignment
  • Folds flat for easy storage and transport
Store
0 in stock
Text to Me
caret

Product Details

It is a smooth action ball bearing roller. Its loading capacity is 250 lbs. It is used with table saw, band saw, chop saw or planer.
  • 11-1/2 in. W x 2 in. Dia
  • Flip-up guides for stock alignment
  • Folds flat for storage or transport
  • Moves long, wide, heavy materials
  • Return Policy
caret

Specifications

caret

Questions & Answers

10Questions
caret
Q:how do i contact the manufacturer of hdx roller stands ? i cannot find a hdx website for parts.
by|Dec 28, 2021
1 Answer
Answer This Question

A:  Please reach out to us at customerservice@xddproducts.com

by|Jan 20, 2022
    caret
    Q:How can i get red replacements knobs for a HDX AC43 roller stand?
    by|Dec 24, 2021
    1 Answer
    Answer This Question

    A:  The manufacturer should have parts available. That would be my first call or email.

    by|Nov 4, 2022
      caret
      Q:how can i get replacement red adjusting handles?
      by|Dec 24, 2021
      1 Answer
      Answer This Question

      A:  Please contact manufacturer: customerservice@xddproducts.com. Thank you!

      by|Jan 20, 2022
        caret
        Q:Can I just get replacement rollers?
        by|Jul 20, 2021
        1 Answer
        Answer This Question

        A:  I do not think replacement rollers are available, they cost 30.00 bux if you used them that much and need to replace the rollers then you should have no problem affording a new set.

        by|Oct 23, 2021
          Showing 1-4 of 10
          caret

          Customer Reviews

          4.5 out of 5
          (376)
          • 4.5
            out of 376 reviews
          • 84%recommend this product
          Filter by:
          Showing 1-10 of 376 reviews
          Agree with other reviews that locking bolt slips easily. Have to really tighten it up. Chose this...
          Agree with other reviews that locking bolt slips easily. Have to really tighten it up. Chose this one over other models because it has keepers that can be flipped up to keep board from sliding off. $5.00 extra is worth it.
          by
          • DIY
          • Recommended
          6 found this review helpful
          Roller head is good but the stand is defective
          My issue with this product is the feet. I did not use the stand until the 90 day return window had passed. One of the feet was welded on incorrectly and is off by over 1/2 inch. I have to use shims to make it usable. I think the stand would be just fine if not for the defect. Just check it at the store before you purchase it.
          by
          • DIY
          • Recommended
          13 found this review helpful
          Quite good AFTER small mod
          Read reviews but still took a chance on it. In the store it seems sturdy enough. At home I realize that the red handle does not fasten to the hex bolt head true so it just spins and spins but does not tighten the bolt locking in the height adjustment. Reason is the shaft interior of the red handle is not a perfect hex shape: partly round in the lower section where the 1.25" bolt head will line up when you need to tighten it. Really poor QA by manufacturer for such an integral part. SOLUTION: purchase a 3" hex headed replacement bolt. Will allow for pulling the red handle out so you can realign the hex head to the section of the red handle interior where it is hex shaped. Thereby giving you the ability to apply enough torque so the height adjustable roller will stay with confidence. If handles fails one day I will just toss the red handle and take a wrench to the hex head as I dont believe it will last forever. My solution cost 1 dollar.
          by
            • Recommended
            38 found this review helpful
            Great for composite decking
            Used two of these for a deck project and they worked great for the flimsy composite decking. You have to really tighten it down to stay level, but i didnt have any issues once set. The guides on the side are great as well.
            by
              • Recommended
              by
                by
                  Got these for holding my longer materials on my 12"...
                  Got these for holding my longer materials on my 12" chop saw. They performed ok, because they are alittle unstable unless you get the materials perfectly on them, but overall good product and well worth the 31.00 price for each of them.
                  by
                    by
                      Rating provided by a verified purchaser...
                      Rating provided by a verified purchaser
                      by
                        by
                          Showing 1-10 of 376 reviews