
Return this item within 90 days of purchase.
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
The HOME-FLEX Electronic leak detector is designed to detect even small gas leaks. Built-in microprocessor easily detects natural, liquid propane, butane and methane gases. Red and yellow lights illuminate to indicate the amount of gas detected. Audible alarm also sounds when gas is detected.
Product Depth (in.) | 11.5 in |
|---|---|
Product Width (in.) | 5 in |
Alarm/Detector Features | No Additional Features |
|---|---|
Alert Type | Strobe Light |
Battery Type Required | AA |
Included | No additional components or accessories are included |
Pack Size | 1 |
Power Source | Battery |
Returnable | 90-Day |
Voltage (V) | 3 |
Certifications and Listings | No Certifications or Listings |
|---|
Hi, Mark - Interesting question! The gas leak detector will detect methane gas which is prevalent in sewer gases. However, the only way it can escape is during the flushing process when the toilet's outlet lines are temporarily out of water. We suggest you try the GLD during that time. As an aside, you might want to run it along the base of the toilet where it's mounted to the floor just to check. You'd most like experience a water leak if the toilet isn't sealed well, but an air and/or gas leak would be unlikely. Should you have any further questions, please contact our VPC Customer Service Team at (661) 257-3923 or send a not to productexpert@vpcglobal.com. Thanks.
Hi, Kawika - No, this device will not detect sulphur dioxide. It will detect natural gas, methane, butane, and propane. Should you have any further questions or concerns, please call our VPC Customer Service Team at (661) 257-3923 or send an email to productexpert@vpcglobal.com. Thanks!
Hi, Sanchez - If you call me (Dave) at (661) 257-3923 x1026 or send me an email at productexpert@vpcglobal.com, I'd be happy to email you the instructions that are found on product's packaging. 1. Be in an area you know is free of gas and is not breezy. 2. Install new batteries. 3. Turn the unit on and let it calibrate. It'll "chirp" when done. 4. Test the divice by igniting a gas burner on a stove, blowing out the flame, then putting the device ~1 inch away. It should alert you to the presence of gas.
Hi, Arry - Absolutely. As mentioned on the hd.com wep page, it detects natural gas, butane, and methane in addition to propane. If you have any other questions, please contact our VPC Customer Support Team at (661) 257-3923 or send us an email to productexpert@vpcglobal.com. Thanks!
Hi, Danielle - Generally, yes the EGLD will detect natural gas (propane, methane, and butane too) outside so long as it is not extremely windy which tends to dissipate the gas. If you have any other questions, please contact our VPC Customer Service Team at (661) 257-3923 or send us an email to productexpert@vpcglobal.com. Thanks for your inquiry!
Hi, Randy - We're not quite sure of your question, but here are some suggestions. Once the GLD has been calibrated, put the sensor about 1" or so away from the joint or tubing being checked. As for overall sensivity, you'll want to make sure you do any calibration in a non-windy/breezy area you know is free of gas. Then move indoors to do your testing. It's also very unlikely this GLD will sense gas inside a building from the of outside the building. If that happens and it senses the presence of gas, call the fire department ASAP. If you have any other questions, contact our VPC Customer Service Team at (661) 257-3923 or send us an email to productexpert@vpcglobal.com. Thanks!
Hi, Randy - Thanks for your inquiry. It's highly improbable that this gas leak detector would sense gas inside the home from the outside. Either that or there's a significant amount of gas inside the home. If that's the case, do not try to enter the house and call the fire department immediately. If you have any other questions, please contact our VPC Customer Service Team at (661) 257-3923 x1026 or x1010 or send us a note to productexpert@vpcglobal.com.
Hi, Linda - Yes, this gas leak detector is designed to detect natural gas, propane, methane, and butane. If you have any other questions, please contact our VPC Customer Service Team at (661) 257-3923 x1026 or x1010 or send us a note to productexpert@vpcglobal.com. Thanks!
Viewing 1-8 of 108
4.1 out of 5