#1 Home Improvement Retailer

Internet #

304225271

Model #

HB-260-03

Store SKU #

1003008641

Store SO SKU #

1002967123

Wired LED Illuminated Doorbell Push Button, Black

$1397
  • Hampton Bay wired doorbell button
  • Easy to install; works with most 16V hardwired doorbell systems
  • Doorbell push button comes in black finish
  • View More Details
Store
0 in stock
caret

Product Details

Hampton Bay banner
Bell Button
Wired
Surface Mount
Warranty
A replacement wired doorbell push button is an easy way to enhance the entry way into your home and welcome your visitors. Coordinate the push button color, finish and style with your door hardware or entry light. This push button works with most 16-Volt hard wired doorbell systems and mounts to the door frame or exterior wall of your home. A wired doorbell and transformer is required if not already installed.

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

16Questions
caret
Q:What is the IP rating of this button? Is it water resistant or waterproof?
by|Jun 3, 2021
1 Answer
Answer This Question

A:  This product is safe for standard outdoor use for push button application. Thanks for your question!

by|Jun 4, 2021
    caret
    Q:What is the distance between screw holes, (replacing existing button).
    by|Oct 17, 2020
    1 Answer
    Answer This Question

    A:  Distance between screw holes: 2.10"

    by|Oct 19, 2020
      caret
      Q:Where can I get a diode for this button?
      by|Jun 17, 2020
      1 Answer
      Answer This Question

      A:  Ziggy, Please contact our technical service team and we will be happy to send you one. You should only need a diode if you're using the wired push button with a electronic chime (Chime with a speaker)

      by|Jun 19, 2020
        caret
        Q:Where can i get a diode for this button?
        by|Jun 16, 2020
        2 Answers
        Answer This Question

        A:  Why do you need a diode ? it is a open and close circuit switch with a light powered by a transformer

        by|Jun 18, 2020

        A:  Ziggy, You will only need a diode if you are using the wired push button with an electronic chime. If you still need one please contact our technical service team and we will be happy to send you one.

        by|Jun 18, 2020
          Showing 1-4 of 16
          caret

          Customer Reviews

          4.6 out of 5
          (268)
          • 4.6
            out of 268 reviews
          • 95%recommend this product
          Filter by:
          Showing 1-10 of 268 reviews
          I have this doorbell. Install was easy with existing wires. Today I tested the doorbell and it ...
          I have this doorbell. Install was easy with existing wires. Today I tested the doorbell and it broke. The brass looks good with a cheap chunk of plastic.
          by
          Response from HeathCoNov 25, 2019
          Hello,
          We are sorry that has happened. Please reach out to technical support at 1-800-858-8501 and we will make sure to get that replaced.
            1 found this review helpful
            Decent weight metal, nice backlight. Easy to install, only takes a second.
            Decent weight metal, nice backlight. Easy to install, only takes a second.
            by
            • Verified Purchase
            • Recommended
            2 found this review helpful
            Simple to install
            We replaced our old cheap doorbell that the builders put in. After 2 years the light was burnt out. So we decided to get this brand and it only took 5 mins to install. It looks so much better than our old plastic one.
            by
              • Recommended
              2 found this review helpful
              The device itself was incredibly simplistic housed in a metal casing. The only reason why I'm not...
              The device itself was incredibly simplistic housed in a metal casing. The only reason why I'm not so stoked on this product is because it cost $15 for just the doorbell easy to install but they all are
              by
              Response from HeathCoJul 8, 2019
              DTF,

              We are happy to hear that you liked your new wired doorbell. We are sorry that you were not happy about the price, as always we try and provide a great product at competitive prices for our customers but we do appreciate your feedback.
              • Verified Purchase
              1 found this review helpful
              Looks great and matches my light fixtures.
              Looks great and matches my light fixtures.
              by
              • Verified Purchase
              • Recommended
              1 found this review helpful
              The doorbell has an attractive look. I had an issue with it falling apart when attaching the wire...
              The doorbell has an attractive look. I had an issue with it falling apart when attaching the wires. I thought i had it snapped back together, but wound up loosing the connection terminals and the wire in the wall. Had to return it and get another one. The neon lights don’t seem to last very long either.
              by
              Response from HeathCoMar 22, 2019
              Kenny,

              It sounds like you may have unsnapped the terminals from the light housing. If you ever have an issue like this in the future please feel free to reach out to us at 1-844-760-3644 and we can help you.
              • DIY
              • Verified Purchase
              • Recommended
              I replaced an old, faded plastic doorbell button that would stick at times with this product. Wh...
              I replaced an old, faded plastic doorbell button that would stick at times with this product. What an improvement! The finish, solid metal plate of a decent weight and color-matched mounting screws are high quality. I also like the lighted button which I didn't have before. This product makes the entry area look much nicer, and you can see the doorbell button at night. It was very easy to install too.
              by
              • Verified Purchase
              • Recommended
              It's a doorbell! But, it's easy to install. Requires just the simple attachment of the two wires ...
              It's a doorbell! But, it's easy to install. Requires just the simple attachment of the two wires for the doorbell. It is lit for nighttime. It is made of metal and should last for years especially exposed to the elements that can deteriorate those cheap plastic doorbells. I actually attached mine to a brass switch plate which I drilled and tapped to accommodate the attachment of the bell to this new plate. Took me twenty minutes!
              by
              • Recommended
              3 found this review helpful
              Selected this wired door bell push button to work with our new HAMPTON BAY Wireless or Wired Door Bell in Black Frame with White Insert Model # HB-7623-03. This push button is manufactured with a high quality bronze metal and its depth is smaller than many push buttons making the unit very attractive. The rectangular button is illuminated for easy detection at night. To install the push button you attach the two wires to the two screws on the back of the button then use the provided wood screws to mount the push button near the door. It is very easy. In our situation, however, we had to add a diode across the two screws on the back so that the doorbell would play the full musical recording. Otherwise it would just go ding dong. This was a little more tedious than just screwing on the two wires. It took less than 5 minutes to install (the doorbell and wiring was already in place). We love the eloquent look of this push button. We rate it 5 stars and would recommend it to friends It does enhance our entry way into our home and welcome our visitors.
              by
              • Recommended
              4 found this review helpful
              Hampton Bay Wired Door Bell Push Button in Mediterranean Bronze. This replacement wired doorbell...
              Hampton Bay Wired Door Bell Push Button in Mediterranean Bronze. This replacement wired doorbell push button was easily installed and enhanced the entry way as you walk to the front door. The style and the bronze color really stand out. This push button works with most 16-Volt hard wired doorbell systems and mounts to the door frame or exterior wall of your home. Since I had just upgraded with the Hampton Bay door bell, this push button completes the set. (A wired doorbell and transformer is required if not already installed.)
              by
              • Recommended
              2 found this review helpful
              Showing 1-10 of 268 reviews

              Frequently Bought Together

              +
              +
              Price:
              $1397

              Compare Similar Doorbell Buttons

              current product
              Wired LED Illuminated Doorbell Push Button, Black
              Wired LED Illuminated Doorbell Push Button, BlackWired LED Illuminated Doorbell Push Button, Antique BrassWired LED Illuminated Doorbell Push Button, Mediterranean Bronze
              BrandHampton BayHampton BayHampton BayHampton Bay
              NameWired LED Illuminated Doorbell Push Button, BlackWired LED Illuminated Doorbell Push Button, BlackWired LED Illuminated Doorbell Push Button, Antique BrassWired LED Illuminated Doorbell Push Button, Mediterranean Bronze
              Price
              $1397
              $1497
              $1797
              $1797
              Ratings
              (268)
              (501)
              (501)
              (165)
              Power ConnectionWiredWiredWiredWired
              Button ShapeRectangularRectangularRectangularOval
              FeaturesLightedLightedLightedLighted
              THD SO SKU1002967123
              View ProductView ProductView ProductView Product