#1 Home Improvement Retailer

Internet # 202093850

Model # 354221

Store SKU # 354221

1/4 in. x 2 ft. x 4 ft. Medium Density Fiberboard

Limit 90 per order
  • One (1), 1/4"-thick, 2'x4' (nom.), smooth, unfinished, MDF panel
  • Versatile, project-ready component sized for DIY and home decor
  • Cut for creativity and convenience; easy to handle/work and store
  • View More Details
Store
0 in stock
Product Details

About This Product

For convenience and creativity, Handprint's MDF panel is as inspirational and versatile as it is easy to work and ready to customize. Featuring clean, smooth faces and edges, this project component is perfect for a wide variety of home DIY and decor projects - any project where a smooth surface is an ideal starting point. Loved by makers and DIYers alike, we take the hard work out of home projects - but leave all the satisfaction in.

Highlights

  • Actual dimensions: 0.22" x 23.75" x 47.75" Tolerance: +/- 1/4"
  • Weight: Approx. 7 lbs
  • Mixed species; Grade: Standard MDF; CARB Phase 2 compliant
  • Smooth, unfinished face, back, and edges; consistent surface appearance; square-cut corners
  • Uniform thickness and density; cuts more easily than other wood products; free of visible defects such as water damage or staining
  • Recommended for indoor use only; performs as well or better than solid wood for a wide variety of projects, including furniture, cabinets, shelves, and home decor
  • Ready to customize with the finishes of your choice, including paint and sealant; stain is not recommended; if using outside, seal with a weather-protectant finish and place in a covered or protected area
  • Note: Product may vary by store.
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 202093850

Model # 354221

Store SKU # 354221

Additional Resources

Specifications

Dimensions

Actual Product Length (in.)

47.750 in

Actual Product Thickness (in.)

0.22 in

Actual Product Width (in.)

23.75 in

Nominal Product Length (ft.)

4

Nominal Product Thickness (in.)

1/4

Nominal Product Width (ft.)

2

Details

Exposure Durability

Interior

Pack Size

1

Plywood Features

Paintable

Plywood Product Type

Project Panels

Project Panel Type

MDF

Warranty / Certifications

Manufacturer Warranty

See store for details

Questions & Answers

23Questions
caret
Q:Is this product formaldehyde free and safe for a laser?
by|Feb 7, 2022
1 Answer
Answer This Question

A:  As with most Medium Density Fiberboard, this product does contain a small amount of formaldehyde. The amount is minimal and complaint with CARB Phase 2. Due to that, it's always best practice to do any laser cutting in a well ventilated space. The laser manufacturer would be better able to answer questions about it's approved use, as there are several styles on the market, and each uses different technologies and settings.

by|Feb 8, 2022
    caret
    Q:Am I able to have purchased sheets cut into strips at the store?
    by|Jan 20, 2022
    3 Answers
    Answer This Question

    A:  I think it depends on what size the strips are and the store you use. A few years ago I asked for a 4 x 8 sheet of plywood cut to 2 x 8 and they said they could do a crosscut but couldn’t rip it because it was too long.

    by|Jan 21, 2022

      A:  Please visit your local store to determine the availability and cost of this service, if it's offered.

      by|Jan 28, 2022

        A:  Yes, but they are not responsible for mis cuts. 

        by|Jan 25, 2022
          caret
          Q:If i seal it after painting (an exterior door hanger) should it be ok from warping?
          by|Sep 7, 2021
          1 Answer
          Answer This Question

          A:  Hello Tcrow, After discussing this with our product expert, here are our thoughts: Unless you use pressure-treated plywood or CDX plywood (both rather rough for trying to make something that's supposed to be pretty), there really isn't much out there that won't eventually succumb to Mother Nature. Sealing your project with a weather protectant isn't a bad idea. It just isn't a silver bullet that will make the project last forever either. Please apply several coats and reapply annually - or as often as needed.

          by|Sep 8, 2021
            caret
            Q:If I come to the store to get this product, can someone cut this down for me?
            by|Jul 18, 2021
            2 Answers
            Answer This Question

            A:  Yes, but not to finial dimensional size. You'll have to cut to finish size.

            by|Jul 18, 2021

            A:  Hello Lisa, Yes, that should not be an issue. Please not that the first few cuts are free, but beyond that, there is a charge of 25 cents per cut.

            by|Dec 18, 2021
              1 found this answer helpful
              Showing 1-4 of 23

              Customer Reviews

              4.6 out of 5

              • 4.6 out of 261 reviews
              • 93% recommend this product
              Filter by:
              Showing 1-10 of 261 reviews
              Did not receive
              not only did they deliver to the wrong address, they sent an incomplete order. Besides the 2x4x1/2 mdf board, I ordered a 2x4x1/4 mdf board but instead of the 1/4" board, I got this abomination (see photo). I paid for early delivery and now have to wait 3 more days to get what I needed. lost a new customer in the process. Very disappointing.
              by
                Great product to work with.... Several cuts later, some glue,...
                Great product to work with.... Several cuts later, some glue, pin nailer, and paint resulted in a very functional kitchen utility drawer organizer!!!
                by
                • Verified Purchase
                I use mdf melamine for cabinet interiors. Bright cab interiors...
                I use mdf melamine for cabinet interiors. Bright cab interiors that are washable.
                by
                • Verified Purchase
                1 found this review helpful
                Excellent and less expensive alternative to plywood. It is great for work bench tops, cabinetry s...
                Excellent and less expensive alternative to plywood. It is great for work bench tops, cabinetry simply because the surface is a lot finer, the material is more dense making precision cuts easier to maintain. No good around water so I treat my work with any kind of oil so that water is always repelled.
                by
                • Verified Purchase
                • Recommended
                2 found this review helpful
                Good material, clean and flat. Used it for narrow 8” x 8” shelves.
                Good material, clean and flat. Used it for narrow 8” x 8” shelves.
                by
                • Verified Purchase
                • Recommended
                1 found this review helpful
                I added this thin MDF on top of the wire shelving to reinforce the canned good shelves in our pan...
                I added this thin MDF on top of the wire shelving to reinforce the canned good shelves in our pantry. The material is uniform, flat, square, and nice looking. The size was perfect for transporting home in my car. Recommended.
                by
                • Verified Purchase
                • Recommended
                5 found this review helpful
                Was perfect for what i needed. Used it to build a seat for a pedal car
                Was perfect for what i needed. Used it to build a seat for a pedal car
                by
                • Verified Purchase
                • Recommended
                1 found this review helpful
                I had a plumbing leak in the garage where the flexible pipe comes out of the main. To get to it t...
                I had a plumbing leak in the garage where the flexible pipe comes out of the main. To get to it the plumber ripped up the drywall bad. After, he said he wouldn't put the drywall back in case anything else broke later. So I got this wood. It worked well to cover up the area in a way to get back and also look streamlined. I also wanted it to go lower than the drywall to the floor so it needed to be a little flexible. It worked great.
                by
                • DIY
                • Verified Purchase
                • Recommended
                Used for drawer bottoms. Worked very well.
                Used for drawer bottoms. Worked very well.
                by
                • Verified Purchase
                • Recommended
                1 found this review helpful
                We made these beautiful door hangers for my girlfriend business...
                We made these beautiful door hangers for my girlfriend business
                by
                • Verified Purchase
                2 found this review helpful
                Showing 1-10 of 261 reviews