#1 Home Improvement Retailer

Internet # 207195321

Model # 263117

Store SKU # 555450

Attic Pine Oriented Strand Board (Common: 5/8 in. x 2 ft. x 4 ft.; Actual: 0.594 in. x 23.75 in. x 47.75 in.)

Limit 90 per order
  • Install over insulation or unreliable attic flooring
  • Boards lock together using a tongue and groove design
  • Create additional storage in otherwise unusable attic space
  • View More Details
Store
0 in stock
caret
Product Details
  • Install over insulation or unreliable attic flooring
  • Boards lock together using a tongue and groove design
  • Create additional storage in otherwise unusable attic space
About This Product

OSB Attic Decking has a convenient tongue and groove design for easy installation. Use the tongue and groove feature to lock multiple boards together and improve the organization of your storage space. Enjoy a clean look and increase the usable square footage of your attic by multiples of 8 sq. ft. per board. For standard installation, apply this pre-cut decking to supporting joists or truss bottom chords spaced 24" O.C. or less. Securely fasten the decking to supporting members following the requirements of the local building code. Apply the long direction of the plywood across the supporting joist (the face grain of the plywood runs perpendicular to the supporting joist). When properly applied, this decking will support 30 pounds per square foot of storage load. See Fastening Requirements under Info & Guides for further installation instructions. California residents: See Proposition 65

  • Each board supports 30 lbs. per square foot of storage load, for a total of 240 lbs. per board
  • Perfect for DIYers
  • Sized for easy handling, transportation and storage
  • Precut boards may be secured to supporting joists or truss bottom chords spaced 24 in. O.C. or less
  • Install across supporting joists and secure with fasteners
  • Run the face grain of the plywood perpendicular to the supporting joist for added load strength and durability
  • Use caution when accessing items stored at a distance and proceed by stepping only on the attic boards where they cross a joist or truss chord
  • Counter-sinking screws is recommended to maintain a smooth appearance
  • For the cleanest cut, use an 80-tooth or higher table saw blade intended for cutting wood products
  • Grade: On-Grade
  • Common: 5/8 in. x 2 ft. x 4 ft.; Actual: 0.594 in. x 23.75 in. x 47.75 in.
  • Each panel weights approximately 17.75 lbs.
  • Product may vary by store
  • Return Policy
  • California residents
     see Prop 65 WARNINGS
Product ID #: 207195321Internet #: 090489465438Model #: 263117
caret

Specifications

Dimensions

Actual Product Length (in.)48.000 inActual Product Thickness (in.)0.594 in
Actual Product Width (in.)24 inNominal Product Length (ft.)4
Nominal Product Thickness (in.)5/8Nominal Product Width (ft.)2

Details

Exposure DurabilityInteriorPack Size1
Plywood FeaturesPaintable, StainablePlywood Product TypeProject Panels
Project Panel TypeOSB/Waferboard

Warranty / Certifications

Manufacturer WarrantySee store for details
caret

Questions & Answers

31Questions
caret
Q:Would this be a good, sturdy, and long lasting top for a workbench?
by|Nov 30, 2023
1 Answer
Answer This Question

A:  Workbench, this board has the possibility to be installed as a top of a workbench.

by|Dec 5, 2023
    caret
    Q:Looking to install these boards in a PNW attic. Are these boards treated to resist mold/mildew in a possibly damp attic?
    by|Jun 6, 2023
    1 Answer
    Answer This Question

    A:  Aimee, Our OSB is a perfectly adequate solution for a standard PNW attic. The board would not be suitable if there is continuous exposure to the elements (i.e. a hole in the roof).

    by|Jun 7, 2023
      caret
      Q:Can I use this board to walk in the atttic for doing doing any drill work from attic ?
      by|May 1, 2023
      1 Answer
      Answer This Question

      A:  Psaleem, Yes, This board would work to be used to walk on an attic floor for doing any needed work.

      by|May 2, 2023
        caret
        Q:Is this thick enough to walk on in an attic?
        by|Oct 13, 2022
        1 Answer
        Answer This Question

        A:  KatD, This can be installed over insulation or unreliable attic flooring.

        by|May 7, 2023
          3 found this answer helpful
          Showing 1-4 of 31
          caret

          Customer Reviews

          4.5 out of 5
          • 4.5 out of 83 reviews
          • 92% recommend this product
          Filter by:
          Showing 1-10 of 83 reviews
          Some of the boards were off-width too narrow. The tongue and groove widths and positions varied f...
          Some of the boards were off-width too narrow. The tongue and groove widths and positions varied from one to the next, making it difficult to match up a series of boards to lay without significant seams. Overall finish quality was terrible. Some of the tongues and grooves were freyed/damaged. A couple of the boards were painted blue on one side. The best aspect this product was the low price and ready availability. I used it to build a sprung dance floor in our basement (with Marley vinyl surface).
          by
          • Verified Purchase
          2 found this review helpful
          great product. a lot easier than moving the full sheets into attic
          by
          Response from UFPI RepresentativeFeb 15, 2024
          Hello Brian, Thank you for your wonderful review! If there’s anything else that we can help you with, please e-mail our customer service department at UFPRetailCS@UFPI.com, and one of our representatives will be happy to assist you.
          • Verified Purchase
          This has worked out well. I was going to buy a higher quality piece of wood but this is working well.
          by
          Response from UFPI RepresentativeFeb 7, 2024
          Dear Dave, Thank you so much for your wonderful review. Handprint really appreciates your business and we’re glad that you enjoy this product! If there’s anything else that we can do, please e-mail our customer service department at Help@HandprintMade.com, and one of our representatives will be happy to assist you. – Your Handprint Team
          • Verified Purchase
          by
          • Verified Purchase
          by
            by
            • Verified Purchase
            by
            • Verified Purchase
            Just what I needed for my attic. Size easy to...
            Just what I needed for my attic. Size easy to handle. Priced reasonably. A little rough on under side but fine for what I want it for.
            by
            Response from UFPI RepresentativeMay 4, 2023
            Hi Jan12, we’re happy to hear you had a nice experience with Handprint! Your input is incredibly important and valued by our team, so we’d love to know more about your projects any time. And thank you for your business! If there’s anything else we can do, please e-mail our customer service department at Help@HandprintMade.com, and one of our representatives will be happy to assist you. – Your Handprint Team
            • Verified Purchase
            by
            • Verified Purchase
            Used it for attic decking. Easy to handle. Good for...
            Used it for attic decking. Easy to handle. Good for light loading and with careful treading.
            by
            Response from UFPI RepresentativeMar 20, 2023
            Dear MG Allen, thank you for your wonderful review! We're really glad that the Attic Pine Oriented Strand Board worked well for your project! If there’s anything else we can help you with, please e-mail our customer service department at UFPRetailCS@UFPI.com, and one of our representatives will be happy to assist you.
            • Verified Purchase
            Showing 1-10 of 83 reviews

            Compare Similar Items