- Low-cost solution for shingle replacement
- Can extend roof life up to 5 years
- Adds water resistance to shingles and locks in granules
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Product Details
About This Product
Henry 812 RoofSaver Clear Sealer is a shingle coating designed to provide shingle protection by extending the life of aged shingles and low-sloped mineral surfaced roll roofing by locking in granules and reducing further granule loss. RoofSaver can also be used on clay, concrete and slate roof tiles, and protects against sun, rain, wind, ice and snow. The Shingle treatment renews appearance of existing roof and stays clear over time. For 1/4 of the cost of the lowest priced shingles and 1/10th of the labor time, you can extend the life of your shingles for up to 5-years.
Highlights
- Shingle extender: Low cost shingle treatment is the solution to shingle replacement
- RoofSaver Shingle Coating puts moisture back into your shingles extending shingle life
- Extends shingle & roof life and up to 5-years
- Easy application shingle coating, 1 Gal. covers up to 200 sq. ft.
- Shingle treatment is 1/4 the cost of shingles and 1/10th the labor of shingle replacement
- Return Policy
Product Information
Specifications
Dimensions: H 7.5 in, W 6.5 in, D 6.5 in
Dimensions
Product Depth (in.) | 6.5 in | Product Height (in.) | 7.5 in |
|---|---|---|---|
Product Size (oz.) | 115.2 | Product Width (in.) | 6.5 in |
Details
Application Method | Brush On, Roll On, Spray On | Approximate Coverage Per Gallon (sq. ft) | 200 |
|---|---|---|---|
Coating Base | Acrylic | Cold Applied | Cold Applied |
Color Family | Clear | Features | Algae Resistant, Corrosion Resistant, Extreme Heat, High Wind Resistant, Ice and Water Shield, Mildew Resistant, Paintable, Rust Resistant, Water Resistant |
Fire Rating (UL 790) | No Rating Available | Number per Package | 1 |
Package size (gallons) | 0.9 gal | Returnable | 90-Day |
Surface Recommended | Concrete/Masonry |
Warranty / Certifications
Manufacturer Warranty | 5-year limited warranty |
|---|
Questions & Answers
Will heating Henry’s roof saver make it easier to go through a pump sprayer. i’ve tried a pump sprayer with different nozzles and the product is too thick to spray
Russell, you should not heat Henry 812 RoofSaver. RoofSaver should be applied at the temperature of at least 50 degrees or above. You will need to keep the pump sprayer at maximum pressure and it helps to have a small container of water to dip the spray nozzle into fairly often to keep the product from clogging.
Can a HVLP spray system work? Or is an airless system only recommended? Thanks
Proxybox, we have not tested High Volume low pressure systems with this product, you would need to test it to see if it would work for you.
I've lost granules on my south facing roof since it is exposed to the sun. I was contemplating buying matching ceramic granules and spraying a coat, sprinkling granules and then another light coat. Would this work?
proxybox, it would be better to roll on the Henry 812 and then scatter the granules to the point of rejection over the coating to make sure that you have good adhesion. It should not be necessary to apply a second coat over the granules.
What type of spray gun do I use
Paul, if you want to apply Henry 812 RoofSaver with a spray gun you can use a normal airless paint sprayer that can produce 500 to 1,000 PSI. You should use a 0.30 to a 0.40 tip or if using a fan tip it would be a 519 or 530 which would give you a 10" wide spray at 1 foot off the surface.
If a air sprayer is used and I have a pitch roof, 1000sq foot house. How much area would that cover.
Kitty, Henry 812 RoofSaver has a suggested coverage rate of 200 square feet per gallon. Rough surfaces vary the coverage rate to about 100 square feet per gallon depending on the porosity and roughness of the substrate.
Is this like a glue? Does it seal? Or just moisturize?
Rick, Henry 812 is a sealer that is designed to lock in the granules on aged shingles and prevent further granule loss. It is not a waterproof product but it does help make shingles a bit more water resistant. The sole purpose of Henry 812 is to make old shingles last up to 5 years longer.
Can this be applied with a paint sprayer?
Aaron, yes you can spray Henry 812 RoofSaver in an airless paint sprayer. You will need a sprayer that can produce 500 to 1,000 psi. Spray one foot off the surface using a fan tip like a 519 or 530.
How I install it on the roof
Mike, Henry 812 RoofSaver can be applied by spray, roller or brush. If spraying the sealer should be applied in one thin pass with just enough sealer to mist the granules . Avoid drips and runs especially on steep-slope roofs and in overlapping areas. Over application of the sealer may result in streaks or uneven drying. Over application of the sealer does not hinder its ability to protect the roof and is only cosmetic in nature. If using a roller use a 1/2" nap roller or if brushing use a soft-bristle paint brush. Evenly apply the sealer in a single thin pass.
Viewing 1-8 of 117
Customer Reviews
3.9 out of 5
