Assembled Depth (in.) | 3 in | Assembled Height (in.) | 9.5 in |
---|---|---|---|
Assembled Width (in.) | 12 in | Handle Length (in.) | 8.125 |
Caddy/holder included | No | Cup Size | 5.13 |
---|---|---|---|
Handle Material | Plastic | Pack Size | 1 |
Plunger Type | Toilet |
A: The PSI Guidelines are as follows; Pump 5 times for 10 PSI, Pump 10 times for 20 PSI, pump 15 times for 25 PSI, pump 20 times for 32 PSI. Do not pump the unit more then 20 times. If you over pump it may loose pressure. If you are following all the guidelines there may be an issue with your unit. Please check to make sure all the components are connected properly. Your unit should not be loosing pressure. You can check back with the store to see if you can exchange the unit if you have followed all the guidelines. Hope this was helpful.
A: PSI guidelines are as follows; 5 pumps - 10 PSI 10 Pumps - 20 PSI 15 Pumps - 25 PSI 20 Pumps - 32 PSI We would suggest you start with 5 pumps and not exceed more than the number of pumps listed above.
A: Yes, you can. This should remove the trapped water in your pipe.
A: A wastage system typically only has one direction in which it can flow. The Pipe Blaster has been designed to effectively push lose any clogged up material using a burst of air pressure within the direction of the flow within the pipe allowing the system to continue its flow.
5
5
4
0
3
0
2
0
1
9
current product | |||
Plunger Type | |||
---|---|---|---|
Toilet | Flange | Beehive, Toilet | Sink, Toilet |
Explore More on homedepot.com
How can we help?
Provide Feedback