#1 Home Improvement Retailer

Internet #205476518

Model #3508711

Store SKU #1000999568

HIT HY 200-R Injectable Hybrid Mortar

Apply Now
Pay $40.75 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Ideal for use in rebar connections and heavy-duty anchoring
  • Working temperature from -40°F to 248°F
  • Use for anchoring structural steel connections
0 in stock
Text to Me
How to Get It

Frequently Bought Together


Product Overview

Hilti Hit-HY 200-R is the latest generation of the industry leading line of inject able adhesive for concrete. Product is ICC-ES approved for use in both cracked and untracked concrete applications. Contractors experience less down time, as the flexibility of the product allows for installation in both wet and dry conditions, as well as a wide temperature range. The HY 200-R can be used for a variety of applications which include anchoring steel columns, beams, racking, guard rails and sound barriers. It can also be used for seismic strengthening, retrofitting and bracing of reinforced concrete buildings. Hilti's HIT HY 200-R represents Hilti's latest innovation based on decades of industry-leading knowledge and experience.
  • Includes one 11.1 oz. foil pack with 1 mixer and one 3/8 in. mixer extension
  • Working time optimized for rebar and deep anchoring applications
  • Base materials: concrete (cracked), concrete (uncracked), masonry (grout-filled CMU)
  • Approvals/test reports: ICC-ES report (concrete), ICC-ES report (masonry), Seismic
  • Base material condition: dry, wet
  • Use with the Hilt HDM 500 manual adhesive dispenser item 3498314 (sold separately)
  • Note: product may vary by store
  • Learn more about concrete anchors here.
  • California residents

Additional Resources

From the Manufacturer

Compare Similar Masonry Anchors

current product
HIT HY 200-R Injectable Hybrid Mortar
5/8 in. x 8 in. HAS-E Threaded Steel Rods (10-Piece)HIT-RE 500 V3 11.1 fl. oz. Epoxy AdhesiveTiten HD 3/4 in. x 10 in. Mechanically Galvanized Heavy-Duty Screw Anchor (5-Pack)
BrandHiltiHiltiHiltiSimpson Strong-Tie
NameHIT HY 200-R Injectable Hybrid Mortar5/8 in. x 8 in. HAS-E Threaded Steel Rods (10-Piece)HIT-RE 500 V3 11.1 fl. oz. Epoxy AdhesiveTiten HD 3/4 in. x 10 in. Mechanically Galvanized Heavy-Duty Screw Anchor (5-Pack)
Fastener Length (in.)128 in12.75 in10
Fastener TypeChemical AnchorsRod AnchorsChemical AnchorsConcrete Screws
Fastening Base MaterialConcreteConcreteConcreteBrick,Cinder Block,Concrete
Fastener/Connector MaterialSteelSteelSteelSteel
FeaturesNo Additional FeaturesCoatedNo Additional FeaturesNo Additional Features
Package Quantity11015
Anchor Diameter (in.) 5/8" 3/4"
View ProductView ProductView ProductView Product

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.8
    out of 7 reviews
  • 100%recommend this product
Filter by:
Showing 1-7 of 7 reviews
The customer service was great, however, these came to us...
The customer service was great, however, these came to us a little slower than we would have liked.
    Rating provided by a verified purchaser...
    Rating provided by a verified purchaser
    • Verified Purchase
    Performed as expected...
    Performed as expected
    • Verified Purchase
    Used for years. Nonsense that you do not stock the...
    Used for years. Nonsense that you do not stock the gun to apply it.
    • Verified Purchase
    Outstanding product
    this stuff is amazing, used to installed anchor bolts to concrete stairs, 85 degree weather, cured in about an hour and was able to resume work. VERY strong
    • DIY
    • Verified Purchase
    • Recommended
    2 found this review helpful
    easy breezy
    I just wanted to add one point to the other reviewer that made the comment: I just wish the partial tube would last for reuse...These do last. Just put the cap back on, or leave the old mix tube attached until next time. Then when needed again, discard the old mix tube, attach a new mix tube and you're ready to go. It's epoxy, so it doesn't set up until it gets combined in the mix tube.
      • Recommended
      1 found this review helpful
      Great Product , has never faied to hold-up for us
      With the Hilti adhesive applicator , its just point and shoot , everything is included . We used it to anchor 2-machines in our welding/fabrication shop . We used 1" and 1 1/4" anchor bolts for holddowns , just drill the holes to size and depth , inject product , insert anchor and let set-up. It would be nice if the partial tube of product would last after the seal is broken so there was no wasted product . Else , great product .
      • Pro
      • Verified Purchase
      • Recommended
      3 found this review helpful
      Showing 1-7 of 7 reviews