Whitehaven Charleston Blue Wood TV stand with Adjustable Shelves and Two Drawers (45 in. W x 26 in. H)

This is not a wooden tv stand per se, which for the price and going by the description I would have expected. It looks ok, but parts are clearly MDF. Very disappointed.

This is a very sturdy piece of furniture, once assembled. It looks sharp and doesn't have any deflection in the top surface, but it has some flaws that can't go without mentioning. The center shelves are nice, and adjustable, but they are a very strange height. In order to fit DVD/Bluray cases on them, you must raise or lower them to the most extreme positions... in doing so though, the remaining shelf becomes useless as it is only an inch or so tall. Assembly was miserable. They have you assemble some of the heaviest and weakest joints first, then flip it around a few times. I was convinced it was going to rip apart no less than three times. Several of the screw heads they want you to turn are in impossible to reach locations, even with a stubby little screw driver. What should have been a one man, 15 minute job took two of us and almost an hour. It's a strong, sturdy, attractive piece once you get it assembled though.

This is a fairly heavy TV stand which comes with adjustable shelves, and 2 drawers. It looks very nice once put together and it is very functional. It has 2 openings for wires assuming you use this for perhaps a sound system and tv or entertainment center unit. The shelves have 3 select-able levels you can put them in. The drawers are fairly heavy and work well plus the alignment is pretty good once assembled. This has no solid wood in it though as all pieces are made of a pressed particle composition. Therefore the connectors are mostly a cam lock type system. It took me about 1.5 hours to assemble using a power screw driver, and a couple manual screw drivers. The instructions are 100% pictures, and in one or two steps are easy to miss certain pieces. The connector pack only has extras for 2 screws (1 each size), and 2 cam lock hole covers are extra. So if you lose or break any of the cams or studs which go with these cams, you will be out of luck and have to find some way to finish the connection. Over-tightening these cams can break them so be careful. Also due to the fact that this is a pressed product, if you strip any of the screws holes you will end up having to do a glue and wait technique to finish this thing up. Anyway, for a stand which comes completely disassembled, it does look okay when finished. I can recommend this for use at your dwelling, just realize it can be difficult to work with if you bust a piece of it while assembling.

Home Decorators Collection Whitehaven White Wood TV stand with Adjustable Shelves with Two Drawers (45in. W x 26 in. H) is very nice. I am impressed with the quality and the design and sturdiness of the piece. The instructions are very easy to follow. I made one mistake for sure and could have used the wrong screws in the wrong place shorting me about 6 of the longer ones, so that makes two errors. I did not see the 1”x1”, that was mistake one and took 1 minute to correct I had an older entertainment center for the square type TV. My TV was not square any longer and I had 6 pieces of stereo equipment. With the cloud you don’t need all that and the slots this provides is perfect. I will store the other pieces I never used any more. The drawers provide lots of room for stuff like old cassettes and CDs and pull out and push closed easily, even loaded. The cut outs in the back are nice to pull wires through and make it all neat. Nice finger pulls on the drawer fronts. The white finish is high quality and I feel it will be very durable long term. The height is perfect for viewing the TV. I could wall hang the TV and stack all my stereo equipment up on it. I will most likely leave it as is. It arrived in two boxes so don't let the weight scare you, it was easy to unpack and assemble. Just remember you need some room to work.. I used a drill driver on the back wall and you need a very short small phillips head to get to the cam locks inside the drawer area, so you really need 3 different size phillips head screwdrivers to make the assembly quick and easy.This will be a snap to clean and will stay sharp looking. It does not take up a whole wall visually like my old one did. Love it.

Bill was fast, friendly and a pleasure. Thanks. The aervice was easy and perfect

Easy to assemble and very sturdy.

Drawer side still missing

Product met and exceeded my expectations! You do need to do the steps exactly so pay attentionn or you may have to undo a few steps if for example your base board gets screwed in backwards and upside down. I really love the color.

This is a great product. Well packed, easy to put together, sturdy, and attractive. Just what I was looking for.