Hot Dipped Galvanized Steel Lateral Anchor System for Deck to Ledger Connections and Stair Stringers
- Two-DeckLok brackets provide 4000 lbs. of pull out resistance
- Protects structural integrity of the wood with its bolt design
- Built to be compatible with all standard 1/2 in. bolts
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Product Details
About This Product
The patented DeckLok Advanced Lateral Anchor is revolutionizing the deck industry. Providing a bolted connection at all critical structural locations. This system achieves the strength required to meet or exceed existing building codes for lateral pullout and guardrail post stability using standard construction designs and techniques.
Highlights
- Use with standard 1/2 in. bolts
- ICC-ES 2114 - Exceeds 2006, 2009 and 2012 IBC and IRC codes
- A single pair of DeckLok brackets provides up to 4000 lbs. of pull out resistance
- Provides support against lateral and horizontal movement
- Offset bolt pattern preserves the structural integrity of the wood's end grain
- Easy to install on existing structures or new construction
- Return Policy
Product Information
Specifications
Dimensions: H 2.98 in, W 3.145 in, D 6 in
Dimensions
Product Depth (in.) | 6 in |
|---|---|
Product Height (in.) | 2.98 in |
Product Width (in.) | 3.145 in |
Details
Color Family | Grey |
|---|---|
Fastener Material | Steel |
Number in Package | 1 |
Returnable | 90-Day |
Warranty / Certifications
Manufacturer Warranty | Screw Products, Inc. guarantees the structural integrity of the DeckLok Lateral Anchor covering materials, labor, and medical expenses up to $100, 000 resulting from a failure of this product |
|---|
Questions & Answers
Would this function as a hold-down tie to bolt a beam to a concrete pier to resist uplift forces forces in-lieu of a hard-to-set and inflexible strap?
Yes
What are the hole sizes?
Using a tape measure the holes are punched at about 9/16" (sized for a 1/2" bolt). But be aware that the single hole on the folded section is made of 3 sections of metal sheet all folded together and they are not exactly positioned, thus slightly smaller.
Is this item for hanging stair stringers to fascia (board)?
Yes, this item can be used for stair stringers. Stair Stringers If Your Stairs Have Only Two Stringers Installation requires 2 DeckLok Brackets, one per stringer. Place a Bracket against the deck band board and the inside surface of one of the stair stringers. Mark the center hole on the band board and drill a ½” hole. Place the bracket back into position against the stair stringer and place a min. ¼” spacer between the bracket and the band board. Install a 1/2” bolt, w/ flat washer, through bracket, spacer, and deck band board. Ma rk and drill for two diagonally opposed holes on the stair stringer. Install 1/2” diameter bolts, flat washers, lock washers, and nuts. Tighten. Repeat for the second stringer. If Your Stairs Have A Center Or More Than Three Stringers Sandwich the center stringer between two DeckLok Brackets. Mark and drill the center bolt hole for one of the brackets, drilling through the deck band board. Place the bracket back into position against the stair stringer and place a min. ¼” spacer between the bracket and the band board. Install a 1/2” bolt, w/ flat washer, through bracket, spacer, and deck band board. Select two diagonally opposed bolt holes on the stringer; mark and drill through the stringer, and install two, 1/2” diameter bolts, slide the other DeckLok Bracket onto the two protruding 1/2” bolts, then drill center bolt hole in band board. Add spacer, flat washers, lock washers, and nuts. Tighten. Instructions For Use With Engineered Lumber; I-Joists I-Joists must be reinforced with web stiffeners. (See joist manufacturer’s guide for recommended details on modifying or strengthening product.) Using construction adhesive, affix and screw block to each side of the web. Follow the general instructions above to install DeckLok Brackets to the reinforced I-Joist. Instructions For Use With Engineered Trusses Wood 2” x 4” Trusses must be reinforced with plates made from 1/2” Plywood, cut to the overall height of the truss. (See truss manufacturer's guide for recommended details on modifying or strengthening product.) Using construction adhesive and fasteners, affix and screw a plate to each side of the truss. Follow the instructions above to install DeckLok Brackets to the reinforced truss. Installation Notes Use 1/2” diameter hardware; bolts, flat washers on each side, lock washers, and nuts. Triple layer side of bracket mounts towards lateral force. Always read and follow the Product Recommendations provided by Treated Lumber Producers. Railings - Brackets must always be installed on upper post mounting bolt.
can i use this item to connect 2 stair stringers?
Absolutely!
can this be used against a cement wall?
Yes, this can be used against a cement wall.
Viewing 1-5 of 5
Customer Reviews
4.6 out of 5
