Bennett 52 in. LED Low Profile Brushed Nickel Indoor Ceiling Fan with light and remote

Just installed my Fan, and use the weights to balance it, but still a little wobble on the middle speed, the low speed and the high speed no wobble, but could not get the 2nd speed smooth, but over all, happy with the Fan. I had other Fans, but Hunter makes the quietest Fans that i have installed. Have six Fans in my home, and so far have replaced four of them with Hunter, hope to get the last two replace in the future. In one of my pictures you will see one of my old Fans, with lights at the top and hanging under, I would like to see Hunter make a fan like this one, very beautiful, but makes a little noise when running, hope Hunter will come out with a model close to this one, love the ducks and flowers on the globe. Hunter's Fans, are the best. Thanks Herbert

I gave a 4 star due to lack of information in the instructions. I ordered this fan in March but we were not ready to install It due to ongoing renovation. The 1st of June we installed it. It was not working with or without the remote. I made a phone call to hunter informing them of our situation. She had me go through a reset program several times and still the motor would not turn. The representative then ordered a replacement also informing me it was on backwarder until July the 8. A friend came over mid June And he asked if he could install it. I explained The situation and he said he had one just like it as far as the problem when. Then he said they figured in out about the light fixture having to be installed to complete the circuit. That is not in any of the instructions nor did the rep tell me that. After he got it working I called Hunter again and told them that it was now working after completing the light kit which should have been in the instruction. I also explained that I need to cancel the reorder that was on back order. That Phone call was followed with a email to the company. June the 29th I received Confirmation that it had been shipped. It was delivered Within A-day or 2 of that confirmation. As for the light and the fan, it works beautifully as well as very quiet . It is beautiful and simple and low profile. Thank you Hunter Casa Blanca

I am currently installing this fan and writing out of frustration. This thing is a piece of garbage. I installed everything up to the light. When it came to light install I locked the connector and tried to turn the metal bracket to lock in place. It wouldn't go. The instructions says turn clockwise. I tried both directions. The internal parts slipped so I disassembled it and fixed bent brackets that lock motor in place. I bent them back and assembled everything again up to the light. Still it wouldn't click lock in place no matter which direction I turn it. I finally took apart apart the light up to that bracket and tried to take the long approach. It still wouldn't lock. I run my business and have never had that issue before. This model is pure trash.

Great appearance for modern or farmhouse decor. The blade choices are both dark and I chose the brown/grey with wood grain side. The other is rich dark brown that could be black. The antique bulb that is included matches my new wall sconces. For some reason the ceiling mount was not level and the fan housing didn’t sit centered, causing it to hit the housing. So I had to disassemble the whole thing, shim, and reassemble. Now it works great and runs super quiet. Just wish the instructions would have mentioned the leveling. I’m including a picture of the bags with parts because while the instructions are clear as to where to find the parts, I must have looked a dozen times and couldn’t see the star, circle, triangles with the black parts inside.

Wow. This is a very beautiful ceiling fan.. I just installed a ceiling fan in my kitchen. I it looks beautiful. It's not that hard to install yourself as long as you read the instructions.. This ceiling fan has 2 different color fan blades . It has two side colors fan blades. I have pick the black mat with the walnut blades. There are not any switches on the fan. So when you want to a just the fan or lightning you have the remote. .

I received my Hunter Bennett 52-inch fan today, this is a low-profile fan (approx.15and 7/8" from roof to bottom of light shade) with a remote control and a dimmable 5-watt L.E.D. light, I may install a higher watt L.E.D. for a little more brightness. I like the reversible blades that are either walnut or light grey and the body of the fan is matt black. The globe for the light is a smoked color which looks nice with this color fan. It is very easy to assemble and install and being that this fan is a low-profile model it will go in most any indoor room. Another nice feature that drew me to this fan is the lifetime motor warranty.

I was impressed with the quality of this fan. It was very easy to install with one exception. The hole spacing to mount to an old junction box was too wide, but it was an easy fix by drilling a hole through the mounting bracket. This fan is very quiet when running and it moves a lot of air when running at a low speed. I really like that the speed is infinitely adjustable. This is a great improvement over the three speed fan that it replaced. The only drawback is that the light doesn't dim but has three settings. The instructions say that it should dim, so this may just be an operator error. I may have to double check my connections to verify that it is wired correctly. The total installation was less than 2 hours.

I installed this Hunter Bennett 52 inch LED Low Profile Fan in my dining room. The room is used more for sitting than dining so I thought this would work well. Installation was pretty easy. This fan included a full page size booklet of instructions. In addition, the parts you need at each step are in separate bags and are clearly marks so you know which one to use. So here's what I like.. - Easy to install - Good air output on high - Nice remote - Motor reverse is by way of the remote not a switch on the motor - Looks very nice - Vintage LED bulb included - Wobble free and quiet I really like this fan. I used the grey walnut blade side because I didn't want a near totally black fan. I mounted the remote in the cradle on the wall and taped the instructions next to it. You can do a lot with the remote so I'm going to leave the instructions there until I have it all down. I don't have any real complaints but the beep the fan makes when the remote is used could be a deal breaker for certain situations like a light sleeping partner or baby. Also while the LED is nice I feel it's insufficient if it is to be the only light source in a room. Thankfully it can be replaced with another bulb as long as it is 14 watts or less. At any rate, this is another excellent Hunter fan and a great buy.

The Hunter Bennett 52 in. LED Low Profile Matte Black Indoor Ceiling Fan is an excellent choice to add a fashionable look to a room with low ceilings. If you’re considering it please read on and I will share our firsthand experience with it. What I like the most- 1. This fan adds stylish flair to your room, especially if you have low ceilings. The retro included LED bulb and “smoked” glass globe give it a unique look. The blades are reversible. 2. It is very quiet and runs smooth right from the box. No wobble. It includes a remote control that is built into the fan making for easy installation. The Hunter quality is obvious. The large hanger bracket and canopy allow plenty of room for wiring. The decorative hardware is nice and the finish is good. This fan has a great look and works great. What I like least 1. The “retro” LED light is only 5 watts producing the equivalent of a 40 watt incandescent bulb in a yellow gold color range. If your light seems even dimmer than that you should check the dimmer setting with the remote. 2. The remote control, it is very small and mine came with no instructions for the remote. Luckily I have the same remote on a different hunter fan so I have included a small remote function guide card that should have been provided (see picture). For problems with reversing (downdraft or updraft) or with dimming you can see if that helps. Some of the screws for mounting the blades are very small and make for tedious installation.

[This review was collected as part of a promotion.] We took out our old standard ceiling fan with light that had the pull chains on the side, and replaced it with the new 52 inch Bennett low profile ceiling fan by Hunterfan. I absolutely love having the option of dimmable lights and changing fan speed with the touch of a button with the included remote control. This fan is super quite with a pleasant amount of wind speed. It adds beauty to any living space.