The Husky 3-Piece Vertical Air Shut-Off Kit includes adapters that connect air compressors with 3/4 in. NPT female ports to standard 3/8 in. hose or piping. Constructed from durable brass with a steel ball and Teflon seals, the kit includes a quarter-turn handle that quickly turns air on and off. The high-capacity airflow design reduces pressure drops for better tool performance.
One 3/8 in. spigot fitting with female pipe thread and one 3/8 in. screw-on fitting
Connects air compressors with 3/4 in. NPT female ports to standard 3/8 in. hose or piping
Brass construction with a steel ball and Teflon seals for long-lasting use
High-capacity airflow design reduces pressure drops for better tool performance
Covered quarter-turn handle quickly turns air on and off
Maximum pressure of 200 psi
Adapters included for installation
Includes a shut-off valve to turn off the air supply at the compressor port
Call 1-888-HD-HUSKY for customer service and support. Click here for warranty information.
This was just the right setup for my 60 gallon air compressor. instead of attaching the ball valve straight off the compressor for space reasons I attach my 3/8" filter/regulator combo from HF and the 3/4" to 3/8" fitting worked great for that then I attached the ball valve and after that I attached my air hose and the setup works great! big plus that the ball valve is high flow so I don't lose air PSI and SCFM to my air tools. Also note with everything I have attached I did have to buy some extra male to male 3/8" fittings.
Pros: All In One, Durable, Easy to Use, Good Size & Weight, Long-Lasting, Strong, Sturdy, fittings i needed, high flow ball valve
Bought this ball valve to install on my John Deere garden tractor. It will be used to replace the drain plug system on the engine. This will allow me to change oil easier and neater than the standard plug, it will now clear the frame allowing oil to directly into the drain pan. I also will have a pipe plug for extra security