6 ft. Adjustable Height Solid Wood Top Workbench in Black for Heavy Duty Welded Steel Garage Storage System

No assembly! Sturdy and beautiful. Bought two to make a large 4x6 surface and love them!

This table worked great for adding surface area above my generator, table saw and power washer. The only negative is that the table top scratches pretty easily. If you plan to add this table above tools, please keep in mind that you do not have 76 in of space beneath it. Do the math and figure out how much space you have between the legs.

Easy to assemble and great table. Definitely built well.

Nice solid workbench. Legs can fold flat for easier transport too. I used this for a guitar workbench.

Great work bench

Was pleasantly surprised when it arrived. It was fully assembled which I was not expecting. Wish I would have spent the extra money to have it delivered to the house. Adjustable legs are amazing. We added the rolling cabinet underneath, and it fits perfect.

The Husky 76 in. Adjustable Height Workbench is a very sturdy workbench. It will support more that a ton. With its weight of 126 lbs., it is not easily moveable. The integrated power strip is a useful feature and worked well. It includes two USB ports which add to its utility. It would be more useful if the grounding prongs faced downward rather than sideways because some of the charger and other plugs at the end take up considerable space as you see in one of the photos. If the grounding prong faced downward, you would be able to use all four of the 110 outlets. The top is beautifully finished pieces of solid wood glued together with a wood laminate edge on the front and back. Despite what the assembly instructions say, all that you need to do is to latch the folding legs into place. The height may be adjusted from 35" to 42" but you need to do this by removing and reinstalling screws while the workbench rests on its top. It was easy to unbox it and get the workbench onto its side. However, getting it upright was more challenging because of its weight and our lack of superior strength. What we finally did was to one by one insert the thick cardboard packing pieces in the center of the workbench until we raised the top to about 30 degrees. Then it was not too difficult to get it upright. It also has adjustable feet. There is no mention of a warranty. It is made in China.

Heavy-Duty and Solid based foundation is an understatement for me – had to use a dolly and two of us to set it up. But once in place to start working it was un-moveable as we sawed by hand or hammered and use a miter box to cut 5.5 in wide flooring. We set it up as is right out of the box and its height is perfect, if need be, we could adjust the feet to level if on an uneven surface. With its 2300lbs limit cap. I see no limit to what I could do on it, add to that you can place underneath cabinets for storage, you have a complete work area. Let’s not forget, one can fold it up and move it around should that be needed. The top is also solid wood – thick and will take all you can muster up – I’ve used my 1.5 lbs. dead blow hammer on it and all I can tell you is the table does not move – like hitting a block if cement. There you have it, one solid table, holds a ton on it and is (I Say semi-portable – its heavy) portable. Husky – a name you can rely un-pond.

STURDY. VERY STRONG. Heavy-Duty 6+ ft. Workbench is designed for the HD Garage Cabinet Set. It works fine as a stand-alone. The workbench has adjustable height legs for sitting or standing height. The legs fold up for storage when not in use. Quick up and put away. It could use a catch or slot to hold the folded legs in place. It has an integrated 4 outlet power strip on one side of the long edge with 2 extra USB outlets for charging your devices. The table can support up to 2,300 lbs, by the manufacturer. It is a very nice, adjustable and heavy (125 pounds) and strong work table. Heavy-duty steel legs won't slip or slide at the feet but the adjustment of height can shake slightly if not tightened. It comes completely pre-assembled. It has wide rubber tipped feet for uneven floor adjustments. The folding legs are easy to use and do not need tools to function. They have slots to slide into and convenient clips to hold the legs upright. The height adjustment needs a wrench (2 bolts per leg). The finger splice joinery is adequate for the length. The short side corners are end grain and should take some care when on end. There are relief cuts on the underside that I believe are for expansion from temperature changes to avoid cracking. It’s a nice butcher block look.

This workbench is fully assembled when received, and only requires you to unpack it from the box and open up the legs to get started. The wood top is a butcher block style wood top and is very strong. The top is at least 1" thick and probably 5/4" thickness. The strength rating for this bench is 2300lbs or 1 ton 300 lbs. It certainly can hold that amount. The legs are adjustable for height using 8 bolts (2 on each leg) and can move up to 42" high if desired. The feet are adjustable for uneven floors. It has a plug strip with 4 120 VAC plugs and 2 USB plugs. Since nowadays USB charging is common, this extends your workshop to be able to charge those batteries which require the USB connector without adding transformers onto a regular plug. This table is heavy coming in at around 120 lbs. Even though it is easy to fold the legs back up for storage should you want to store it between uses, it IS heavy and may need 2 people to move it, or at least will take quite a bit of effort to put it away and take it out. If you are going to use it for a permanent workbench, you definitely should use L brackets and attach it to a wall stud for safe usage. The left, right and front top wood overlaps beyond the steel frame and will be great for clamping things you are working on directly to the workbench while your do your thing on them. The back top is flush to the steel frame. At 76" wide, it is actually quite a large workbench so ensure your planned area has the room for it. I definitely highly recommend this workbench, and I do not think you will be disappointed with it. The top is bolted with heavy lags to the steel from should you ever need to change the top or repair it. I do love this item...