$15900
Pay $134.00 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- Save time with the easy-load magazine
- Easily switch between sequential and contact nailing
- Tool will not dry fire, protecting the tool and the user
Product Details
Specifications
Questions & Answers
81Questions
Q:Has anyone used .130 nails with this? I know the .120 are Included but couldn't find any info as to whether this gun shot both. Thanks for your time.
by|Nov 21, 2022
1 Answer
Q:how do i find a cylinder seal replacement for this nailer?
by|May 5, 2022
1 Answer
Q:I already own this nail gun. Will it fire .113 siding nails ?
by|Mar 16, 2022
1 Answer
Q:Does this gun come with a hanging hook and a case?
by|Mar 12, 2022
1 Answer
Showing 1-4 of 81
Mar 26, 2019
I have shot a couple of hundred nails through the nailer so far, and am happy with performance. I...
I have shot a couple of hundred nails through the nailer so far, and am happy with performance. It drives 3 1/2 nails and 2 inch nails well. The depth setting on the nailer is easy to adjust. The nailer is lighter than I expected, and is easy to place the nail properly without getting my arm too tired.
Very satisfied with the nailer.
by
Feb 22, 2019
I haven't had it long, so don't know about longevity. But for the new wall we built to enclose t...
I haven't had it long, so don't know about longevity. But for the new wall we built to enclose the garage, it worked great! I have never used a nail gun before, but this one was easy to pick up and just use. After a couple practice fires, I was ready to go. I put a few hundred nails through it and had no issues with both 3 1/4 inch nails, and with 2 inch nails, they all worked perfect.
by
Feb 10, 2019
I'm relatively new to using pneumatic tools like this Husky framing nailer. I'm glad I found this...
I'm relatively new to using pneumatic tools like this Husky framing nailer. I'm glad I found this one for my DIY projects. It was on sale and I had a $5 coupon, so this was significantly less than similar nailers. I used the 50 sample 3" nails to test the nailer prior to using it for an actual project. So far I've used it to fix several loose slats on my stockade fence using 2" galvanized nails and 3" nails to work on a project with several 2x4s. No jams - no problems. It's powerful, accurate and makes nailing work quick. The nailer is easy to adjust, use and worked as expected. I had my Husky 30 gallon compressor set at 100 psi, and it rarely cycled on during use of the nailer. It's well balanced, feels rugged, and is comfortable to use. However, it's a bit larger and heavier than expected, but that's the nature of this type of nailer - not a flaw. So far I'm very pleased with the nailer and will be using it extensively for several construction projects this spring. The price was right, and this might become one of my favorite tools. Sure beats using a hammer. Recommended.
by
Dec 18, 2018
Worked great for framing my basement. Would recommend for the price I paid!!
Worked great for framing my basement. Would recommend for the price I paid!!
by
Dec 11, 2018
Awesome tool very light weight! Made my job easier.
Awesome tool very light weight! Made my job easier.
by
Jun 25, 2018
Needed a gun to frame some walls and soffits in the basement and didn't want to spend $300. This...
Needed a gun to frame some walls and soffits in the basement and didn't want to spend $300. This thing is a beast. Gone through a few hundred nails without a jam. Not too heavy, comfortable rubber grip, nails are easy to load, depth adjustment is simple and tool free. Had a blast this weekend. Can't wait to get down there and use it again.
by
May 15, 2018
Do not be fooled, this framing nailer is not cheap! Lighter than the others and just as powerful...
Do not be fooled, this framing nailer is not cheap! Lighter than the others and just as powerful if not more. I have sent over 2000 3 inch nails since opening the box and it has made a huge difference in my project. It needs a rafter hook but that is the only down fall. Dial your depth to countersink or stay flush, flip the trigger switch for pew or pew pew pew, all you need to do is hold on, this gun has some power! I would buy another in a minute and would tell you to do the same!
by
May 2, 2018
Great product! Easy to load and use. Has yet to jam.
Great product! Easy to load and use. Has yet to jam.
by
May 1, 2018
Awesome! I am no full time carpenter. Bought this to build a shed in my backyard. NO PROBLEMS. Ha...
Awesome! I am no full time carpenter. Bought this to build a shed in my backyard. NO PROBLEMS. Have fired at least 10,000 nails with no issues. Great buy.
by
Nov 3, 2013
Great Nailer
This framing nailer is a great low-cost option, with a price comparable to some other manufacturers' reconditioned models. I haven't torture tested it or anything, but it's worked fine for me without any feed issues or jams so far.
I wanted a full head option since I find them easier to remove than a clipped head nail. The loading mechanism for the 21° nails is really intuitive. It uses a bypass mechanism that allows the nails to slide right in and locks them in place. No opening up the whole magazine and worrying about seating the nails properly.
The depth adjustment was set perfectly for pine, and drove 3" nails perfectly flush into two 2x4s right out of the box at 90 psi. The depth adjustment wheel is easy to use as well. Its air usage is pretty high at 7 SCFM @ 80 psi, but that's for a ridiculous 100 nails a minute, which I'm pretty sure I can't manage. For how I'll be using it, I'll be fine with my 20 gallon Husky compressor which is rated at 4 SCFM @ 90 psi.
The nailer is well balanced and not too heavy. I didn't experience any fatigue while using it, but I haven't exactly gone a full day framing a building with it either. There's a single nail firing mode or a selectable sequential firing mode that lets the user hold the trigger down and contact fire when the safety head is depressed. I expect this Husky will hold up well enough for whatever a weekend warrior can throw at it, and it comes with a 2 year warranty.
The nail gun also comes with a small dropper of oil and all the allen wrench sizes needed for tool maintenance. I was a little surprised at the number of different allen sizes needed - there were 4 or 5 of them. The exhaust direction is adjustable, but a hex key is needed for the adjustment, which was a minor annoyance.
by
Compare Similar Framing Nailers
 |  |  |  | |
| Brand | NuMax | Freeman | NuMax | Husky |
| Name | Pneumatic 34-Degree 3-1/2 in. Clipped Head Framing Nailer | Pneumatic 21-Degree 3-1/2 in. Framing Nailer with Case | Pneumatic 21 Degree 3-1/2 in. Full Round Head Framing Nailer with Nails (500-Count) | Pneumatic 21-Degree 3-1/2 in. Full Round Head Framing Nailer |
| Price | $9942 | $11329 | $11505 | $11900 |
| Ratings | (30) | (366) | (4) | (284) |
| Cord Style | Pneumatic | Pneumatic | Pneumatic | Pneumatic |
| Nail Gun Angle | 34 degree | 21 degree | 21 degree | 21 degree |
| Power Type | Air | Air | Air | Air |
| Maximum Fastener Size | 3-1/2 in | 3-1/2 in | 3-1/2 in | 3-1/2 in |
| Nail Gauge | NA | NA | NA | 10 gauge |
| Voltage (v) | No Voltage | No Voltage | No Voltage | No Voltage |
| Minimum Fastener Size | 2 in | 2 in | 2 in | 2 in |
| Nailer Features | Adjustable Exhaust Port,Comfort Grip,Dry Fire Lockout,Fastener Depth Control,No-Mar Tip,Selectable Trigger | Adjustable Exhaust Port,Comfort Grip,Dry Fire Lockout,Fastener Depth Control,No-Mar Tip,Selectable Trigger | Adjustable Exhaust Port,Comfort Grip,Dry Fire Lockout,Fastener Depth Control,No-Mar Tip,Selectable Trigger | Comfort Grip,Dry Fire Lockout,Fastener Depth Control,No-Mar Tip,Selectable Trigger |
| Loading type | Strip | Strip | Strip | Strip |
| THD SO SKU | 1000388087 | 1000131576 | 1000859382 | |
| View Product | View Product | View Product | View Product |
Related Products
Explore More on homedepot.com
Flooring
Hardware
Lighting
Outdoor Living
