#1 Home Improvement Retailer

Internet # 202941379

Model # RACIBB

Store SKU # 856461

Product Images

Intersystem Bonding Bridge Aluminum Wire Connector

$29.53
Apply Now
Pay $4.53 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card
  • Used with telephone,cable and satellite grounding conductors
  • UV stabilized cover that can be painted
  • Durable die-cast zinc construction
  • View More Details

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

RACO Intersystem Bonding Bridge meets the NEC Article 250.94 requirement. NEC requirement calls for all telephone, cable and satellite grounding conductors be bonded to ground at a single location. It has a compact design and includes a U.V. stabilized cover that can be painted.

Highlights

Product Information

Internet # 202941379

Model # RACIBB

Store SKU # 856461

Additional Resources

Shop All .N/A
From the Manufacturer

Specifications

Dimensions

Connector Depth (in.)

1.386

Connector Height (in.)

1.623

Connector Width (in.)

4.665

Details

Color Family

Metallic

Maximum Wire Gauge

6

Minimum Wire Gauge

14

Package Quantity

1

Warranty / Certifications

Certifications and Listings

UL Listed

Manufacturer Warranty

1 Year

Questions & Answers

Is this for copper wire too?
BySep 13, 2024
2 Answers | 
Answer This Question

Hi ICtwo, yes it is rated for both aluminum and copper.

By|Sep 3, 2025

    (1)

    Yes this is for copper wire

    By|Sep 3, 2025

      (1)

      Can I use this bridge to interconnect bonding for an inground pool?
      ByMay 17, 2024
      1 Answer | 
      Answer This Question

      We will not be able to make recommendation and a licensed electrician would have to advise based on NEC requirements. Consumer Support

      By|Sep 3, 2025

        (1)

        When installing this on a electrical panel ground, what is the standard height this should be placed at?
        ByAug 2, 2023
        1 Answer | 
        Answer This Question

        We'd be happy to help! Please contact us at CableTechSupport@southwire.com for assistance finding the right solution for you.

        By|Aug 8, 2023


          Are they really charging $24.46 for one of these?
          ByOct 24, 2022
          1 Answer | 
          Answer This Question

          Hi TimC, we are the manufacture of the product and do not set the retail pricing.

          By|May 17, 2024


            how many per pack?
            ByFeb 14, 2022
            1 Answer | 
            Answer This Question

            Hi JohnG, there is 1 per pack.

            By|Feb 15, 2022


              Can this e used as a busbar to tie three RV battery’s together?
              ByOct 22, 2020
              1 Answer | 
              Answer This Question

              We are happy to help! Please contact our team at 855-798-6657 for further assistance.

              By|Oct 23, 2020


                Viewing 1-6 of 6

                Customer Reviews

                4.7 out of 5

                • 4.7 out of 100 reviews
                • 94% recommend this product
                Filter by:
                Showing 1-10 of 100 reviews
                Good for single or up to 3 meter pak installations
                Intersystem bonding ground from Commercial Electric is my personal go to for service bonding. It provides plenty of termination points to bond ground conductors for Electric service and low voltage service provider termination boxes. I recommend this to use for single-family or up to triplex installations. There are also other options that work well that allow for conduit to mount to the bonding termination as well.
                by
                • Recommended
                Precision Drilled and Tapped Wire Bonding Block
                This is a versatile termination block that I am using for bonding a generator earth ground to a circuit splice I had to add. All of the screw clamps tighten and loosen without binding and held the wires tightly. The apertures for the wires were all larger than what I needed but the bridge is designed to work with #6 to #2 AWG for the big lug and #14 to #4 for the smaller lugs.
                by
                • Recommended
                What More?
                What more could you want form a bonding bridge! I mean, its aluminum, has good sturdy set screws, a good cover, and a fair price point. I picked these up for a solar set up and needed some blocks to ground wires through. Seems well made, i expect the install to go smoothly. Im certain there are brass blocks and perhaps stainless that may work also, but this is good for interior use for my purposes.
                by
                • Recommended
                good well made bridge
                I like using these bridges for doing work that is being brought into a bundle. This bridge does a nice job for small areas. It is very convenient. I reccomend these for confined locations. This can be a great answer when you are trying to get a lot of work in one area. This allows you to spread a little bit but also combine them. Get a few of these if you are remodeling and need to make electrical changes.
                by
                • Recommended
                A must have for most homes with wells
                I have seen many houses in my years as a general contractor whose CATV and Land Line telephone systems were not grounded properly according to NEC standards. The Code calls for all systems to be grounded to a single point. For many years, this was the municipal water main - generally copper although old galvanized steel ones do exist - that was the grounding point for both the circuit panel as well as the CATV and telephone line. Usually the technician would simply find a close by water pipe, attach a clamp to it and then attach a wire from their equipment to this clamp. However, newer standards require a minimum of 2 - 8 foot, copper coated ground rods to be driven into the ground near the exterior meter socket and a continuous #4 copper wire be run directly from the circuit panel to both of these rods and secured with an UL approved clamp. Some municipalities have begun using PE plastic water mains which provide no earth ground. This problem has almost always existed in homes with submersible pumps in drilled wells. These homes, like mine, have water mains that are entirely PE plastic, right from the submerged pump all the way into the pressure tank in the basement. As such NOTHING can be ground to any pipe in such a house, although I have seen technicians do it! This is where this little Intersystem Bonding Bridges comes into play. Since the circuit panel must already be grounded as I described previously with the 2 - 8 foot ground rods you can now attach a #4 copper wire - I use one with a green jacket - to these rods with an approved UL grounding clamp and tie the other end to the center terminal of this Bridge. Now simply tie any equipment that needs an earth ground: CATV, Satellite TV, Internet router, Land Line telephone, metal domestic water pipes, etc. This is a neat, clean, easy and safe way to provide the proper earth ground for your home. I highly recommend. It is imported from India.
                by
                • Recommended
                You don't have to cut bus ground wire
                This terminal strip is made from quality alloy that feels heavier than aluminum and looks more yellowish gray than pure aluminum. This is because this bridge is made from special copper-alluminum alloy as it's approved for copper wires and you can't use pure aluminum with copper due to bi-metal bond corrosion issues. Central terminal has segment cut away from it so you can slide in ground bus wire stripped from insulation in this spot. You don't have to cut it and use 2 terminals to reconnect it through the bridge. Other ground wires can be connected via 4 large terminals. You can fit probably up to 4-5 14-gauge wires into each terminal. Plastic cap made from soft (not too fragile) plastic. Although electrical ground wires should be always exposed inside junction boxes, lightning ground wire may conduct kilovolt voltages and you don't want to hang around this strip during lightning impact if it's not insulated. There are 2 mount holes if you prefer to mount it on wall or somewhere inside panel.
                by
                • Recommended
                Nice Bonding Connector!
                I got this for its ease of use for bonding multiple things even though I don’t have a specific use for it yet. It’s lightweight (it is aluminum) and has a nice easy to snap on/snap off cover to protect the connections. Has nice large screws that should make it easy to torque to proper specifications and has two large holes for mounting that should make it nice and secure
                by
                Great little grounding bridge
                This grounding bridge is nice that you can add to later if needed. The cover pops right off with little force. I like that the main ground wire can slide right in without running the ground all the way through the bridge. You can use this as a add on to other ground wire or start a new grounding system. There is two mounting screw holes to mount it securely to a wall.
                by
                • Recommended
                It grounds
                I received this about a week ago, haven't had a chance to install it, but physical review seems positive, the aluminum bonding bridge is heafty, I'm not sure how outside stable the plastic cover is and there is no information about it in the bag but it's a bonding bridge and it binds up to 4 items and can do pretty thick guage wire too, the middle lug is for the bridge to be bonded to the panel of decent guage wire
                by
                • Recommended
                Works as it’s supposed to
                When doing an electrical service change I usually order all my supplies from one of three local supply houses. Over the past year it’s becoming harder and harder to source the items needed. Home Depot has come in very handy to get what I need. This Bonding Bridge, while very simple in nature, is required to do a proper and complete job. It is well built and provides all the necessary size connections to allow proper ground bonding for telephone, cable and internet interfaces. I highly recommend you check out Home Depot for your needs.
                by
                Showing 1-10 of 100 reviews