
Return this item within 90 days of purchase.
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Experience the next level of fire safety with the Kidde 10-Year Battery Smoke Detector, Voice Alerts & LED Warning Lights, model 20SD10-V. This smoke detector has enhanced sensing technology that reduces false alarms often caused by cooking and sends fast alerts that help give your family more time to get out safely. This alarm offers a modern 5-inch design ideal for all living spaces such as living rooms, hallways, kitchens, & bedrooms. Comprehensively tested and designed to the latest UL standard for safety and reliability, the 5-inch smoke alarm is powered by a 10-year built-in lithium battery, so you never have to change a battery for the life of the detector (not a battery performance claim). When smoke is detected, the red LED light will flash in time with the loud 85-decibel alarm and voice alerts will state "Fire!" to help you seek safety. A test-hush button allows you to test the battery operations as well as silence nuisance alarms, should they occur. In addition, it's self-testing and easy to install with the included twist-and-click mounting bracket. This Kidde smoke alarm is equipped with an end-of-life notifications that will beep to remind you it's time to replace it at the of its 10-year lifespan. Meets requirements of 9th Edition UL 217 and FCC. Does not meet requirements for CSFM.
Product Depth (in.) | 1.88 in |
|---|---|
Product Width (in.) | 5 in |
Alarm Sensor Type | Photoelectric |
|---|---|
Alarm/Detector Features | 10-Year Battery, Hush Button, Tamper Resistant |
Alert Type | Siren |
Battery Type Required | Built-In |
Commercial/Residential | Home |
Included | Batteries, Mounting Hardware, Owner's Manual |
Pack Size | 1 |
Power Source | Battery |
Returnable | 90-Day |
Voltage (V) | 3 V |
Certifications and Listings | UL Listed |
|---|
It can be used in a finished basement. Not an unfinished unconditioned dusty basement open to the outside air.
Hello. The photoelectric sensor picks up smoke. It shines two different light and when there is enough smoke that the lights both light up the smoke and the light is reflected to the light sensor, the smoke alarm goes off for smoke.
Hello. No, it will have a different bracket and a different placement of the screws. It is exactly for this reason we are transitioning to a universal bracket for most of our alarms so that different alarms won't have different brackets and that future alarms won't have different brackets. We fully admit we had different brackets for different alarms previously.
Hello. Yes, this is the 20SD10-V
Hello. Yes! Push Test/Hush button once to silence for 24 hrs. (Push Test/Hush button again to clear HushTM and perform a test.) Note: 7 days after End of Unit Life begins, the notifications cannot be silenced.
Hello. No, this alarm is battery only and is not wireless.
Hello. The batteries are built into the alarm itself on the motherboard. You activate the battery on the back of the alarm or by putting the alarm on the mounting bracket.
No. The I9010 is not made anymore as it doesn't meet the updated UL code and standards. This is the new version, the 20SD10-V, a 9th edition UL 217 version with photoelectric plus firmware sensor. The I9010 may still be available as the 21008067 if there is any left.
Viewing 1-8 of 19
4.5 out of 5