- Wire Stripper for 8-24 AWG solid and 10-22 AWG stranded wire
- Stripping holes are precision-grounded for removal of insulation
- Features cast alloy chassis with heavy-duty e-coat finish
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Product Details
About This Product
Klein Tools' Katapult Solid and Stranded Wire Stripper / Cutter has a built-in cutting hole to cleanly cut 8-20 AWG solid and 10-22 AWG stranded wire. The stripping head allows you to easily grip and strip just by squeezing the handle. Made of cast alloy with a heavy-duty Ecoat finish for corrosion resistance and durability.
Highlights
- Wire Stripper and Cutter cuts and strips 8-20 AWG solid and 10-22 AWG stranded wire with ease
- Compound action stripping: grip and strip via single-action squeezing motion
- Precision machined stripping holes easily remove insulation without damaging the wire
- Removes up to 1-Inch (25 mm) in length of the insulation layer (jacket layer) in a single step
- Tension loaded wire-grip gently holds the cable while retaining cable geometry
- Cast alloy chassis with heavy-duty Ecoat finish for corrosion resistance and durability
- Additional precision machined steel cutting blades available
- Shop Klein Tools Wire Strippers here
- Note: Product may vary by store
- Click here for more Klein Tool products
- Click Here to See which Electrical Tools you should Use for your Project
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Specifications
Dimensions: H 6.59 in, W 5.25 in, D 1 in
Dimensions
Product Depth (in.) | 1 in | Product Height (in.) | 6.59 in |
|---|---|---|---|
Product Width (in.) | 5.25 in |
Details
Electrical Tools Features | No Additional Features | Features | No Additional Features |
|---|---|---|---|
Hand Tool Type | Wire Stripper/Cutter | Handle Material | Comfort Grip |
Individual/Set | Individual | Jaw Capacity (in.) | 0 |
Jaw Tip Size (in.) | 1 in | Joint Type | Fixed Joint |
Number of Pieces | 1 | Plier Type | All Trades, Electrician |
Returnable | 90-Day | Tools Product Type | Hand Tool |
Wire Stripper Type | Automatic, Electrical |
Warranty / Certifications
Manufacturer Warranty | Please refer to the attached warranty document in the Product Overview section above under Info & Guides. |
|---|
Questions & Answers
Are these insulated to allow for stripping a hot wire, or only for use on wire with the power off?
use with power off.
Do not work on energized equipment.
Insulated
They are insulated but just on blue handles best to always kill breakers
The Katapult Wire Strippers are not insulated.
Does this work well on rg58 cable, to make 3 different size strips on the rg58 for N-type connector.
The Katapult Wire Stripper is not designed for RG58.
what is the guarantee
I’ve had this tool for a 2years already and no issues still works like brand new.
Below is a link to the Klein Warranty. https://images.thdstatic.com/catalog/pdfImages/9f/9fbd8f5b-4e2e-45a6-a043-e5affdd8bda1.pdf Mike
For information on the warranty please refer to the warranty document under Info & Guides or contact Klein Tools Customer Service 800-553-4676.
Are replacement blades available?
Yes, replacement blades are available. Please see the following: Klein Tools model # 11073 Replacement Blades for Wire Stripper 8 to 22 AWG Klein Tools model # 11074 Blades for Wire Stripper 16 to 26 AWG Klein Tools model # 11082 Replacement Blades 10 AWG Max Wire Klein Tools model # VDV110-046 KATAPULT® Wire Stripper Replacement Blade Set, RG6
What aisle is it located at
Depends on the particular store. Select a store and the product page will tell you where the item is located within the store.
The Electrical Tools aisle
could you cut wire speakers with it
As long as it's between 10 and 22 gauge, and you separate the zip cord back far enough to get the cutter on the wire you want to expose, yes.
As long as it's smaller than 10 AWG, yup
Depending on the size, I think these would cut specker wire as long as it is round wire.
Yes, I used this for a full speaker install and it worked great.
The Klein Tools model # 11063W Wire Stripper and Cutter cuts and strips 8-20 AWG solid and 10-22 AWG stranded wire.
Can this do in-line stripping?
...by the way, I have 2 of these and am very happy with them. ...Danny
You can only strip the ends of the wire
No, the item will not work for inline stripping.
No. You can not do inline stripping.
No I don't think it will. It is made to strip the wire jacket off the end of a wire.
I don't see how you could use this for inline stripping. The stripping occurs by "pushing" the stripped insulation off the free end of the cable.
The Klein Tools model # 11063W Wire Stripper is not designed for in-line stripping.
It is excellent, but only for end-stripping, where the removed insulation has a place to go. For mid-wire connections, you can use a splice tap of the proper size, available at auto parts stores and some hardware stores. For high-current applications, it is best to cut all wires that will be spliced, strip with the tool from Home Depot that you asked about and make the splice using wire nuts or copper bug nuts. Both are available at HD. Bug nuts make the best connection for both solid and stranded wire.
Yes it will but, because the wire dont have room for the skin to stay,it will tend to get back in its original position. Solution; make the strip hold it with the pliers and put it in place on the screw.
Not sure what you mean by in line stripping
What is the exact kind of cast alloy used for this tool?
It is diecast. Is safe to work with.
Klein Tools model # 11063W is made of steel.
Hardened steel
The cast alloy for the stripper and cutter is steel.
Steel
Diecast
Viewing 1-8 of 11
Customer Reviews
4.8 out of 5