The Klein Tools Red Safety Lamp provides supplemental visual alert in busy, noisy, dark and bright environments. Designed to attach to Klein Tools' hard hat or safety helmet front or back accessory mounts, the Safety Lamp can also be attached to magnetic surfaces to serve as a stationary alert beacon. The Safety Lamp has 4 user-selectable modes (High and Low settings in both Pulse and Solid On) and is rechargeable via USB-C cable (included).
Focused quad-directional multi-LED is visible up to 1/4 mile (0.4 km) in low light and clear weather
4 operational modes: pulse (high), pulse (low), solid on (high), solid on (low), up to 52-hours runtime
Designed to attach directly to Klein hard hats and safety Helmets with patent-pending front/back accessory mounts, no straps needed
Attach to magnetic surface to serve as stationary alert beacon
Compact and lightweight design for all day use
High qualityr red LEDs for exceptional visibility in both bright and low light conditions
Durable: drop-test rating of 10 ft. (3 m)
IP64 rated: dust and water resistant for indoor/outdoor use
This little light is super bright! There's no way you or whatever you may have this light stuck to can go unseen. We haven't tested the distance to see if can be seen ¼ of a mile away but I can say I don't doubt it. The led lights are a must, helping save power. This light on low is said to last up to 52 hours, I can say on a full charge we've at least made it 48! It has various settings, pulse and solid on high or low, which of course affect the battery life but the fact it's rechargeable and comes with its own cable is a HUGE plus. It can mount to any Klein hard hat or anything metal really, the magnet is very strong. Overall a good safety light that I would buy more of if we needed.
The Klein Tools Rechargeable Safety Lamp with Magnet is a great choice for the added visibility and safety it can add to a job site. If you’re wearing this thing people are going to see you or the equipment you are trying to draw attention to. It is super bright on high. The 4 settings include high, low, high fade and low fade. This light mounts securely to a Klein helmet or anything metal with its powerful magnet. It is very lightweight so you can’t really tell it’s on your helmet. A USB charging cable is included but the power supply isn’t. You can charge with any USB type A charger rated at least 500ma.
Klein Tools’ Model #56063 is another innovative and useful item from one of my trusted brands. This multi-purpose lamp securely snaps into the back of many Klein hart hats/ helmets, including my model #60347. This lamp provides visibility from a wide angle, making it less likely for you to be hit by a vehicle on the jobsite. There are four modes: low and high level flash, and low and high level steady light. The lower levels preserve battery time, while the higher levels give more protection. The lamp charges via an approximately 21 inch USB cable (A to C), which was included. When detached from your hard had, the lamp has a good magnet. In one of my photos, I attached the lamp to an electrical service panel to draw attention to the box being locked out for repair. Along with the headlamp for my hardhat, I have enhanced my safety through greater visibility, and I think I’m quite the Fashionisto.
The Klein Tools’ safety lamp originally designed to be attached to their hard hat and safety helmets can be used for other situations where a safety light is desirable. Being rechargeable eliminates maintaining an inventory of dry cells. The four mode, solid/pulse beam is quad directional. The magnetic lamp is secured to my old (non-Klein) hard hat by an opposing magnet attached on the inside. The lamp’s strong magnet attaches securely to the rear frame of my bicycle. The lamp can also be attached to the car’s open trunk lid as a warning beacon.
I’ve had this for over a year now… it has sat in between jobs… works well still… solid Beacon… hold a charge for a long time… the magnet makes it the icing on the cake!
BOLT Full Face Shield Mounts (No Brim Helmet Only)
The Milwaukee BOLT Full Face Shield ReplacementThe Milwaukee BOLT Full Face Shield Replacement Mount (No Brim Helmet Only) is designed to allow for quick and tool-free shield replacement. This is the mount replacement for BOLT full-face shields (compatible with Milwaukee No-Brim Helmets). The mounts feature stiff locking detents to keep the shield in position during climbing and swift movements. The mounts are designed to be as low-profile as possible, keeping the shield close to the user's face and creating a seal at the top of the helmet. The mounts secure into the BOLT Front Slots on Milwaukee No-Brim Helmets. This face shield mount is part of the BOLT accessory system which allows users to Secure Accessories Simultaneously.View Full Product Description