Return this item within 90 days of purchase.
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Klein Tools' Foam Wire Pulling Lubricant is a no mess, no hassle alternative to traditional wax/gel lubricants. The foam fills the conduit and coats the wires as they are pulled through. The lubricant stays where it is applied, even in vertical conduit. It also dissolves clean from hands, clothing and carpeting.

Product Size (oz.): 19
Product Size (oz.) | 19 |
|---|
Electrical Product Type | Lubricant |
|---|---|
Returnable | 90-Day |
Manufacturer Warranty | Please refer to the attached warranty document in the Product Overview section above under Info & Guides. |
|---|
The lubricant is water based
The foam lube will freeze (at about 32 degrees, since the lube inside is water based), and it will be unusable if frozen. However a frozen can will work if it is thawed out.
Yes
It is water based. Please see the SDS document under Additional Resources from the Manufacturer for more information.
There is no set answer for this question. The lube should be applied as needed.
Yes, it leaves very little residue and is very slippery.
Yes
I think you need more than lubricant for this length and gauge. A spool of 420 linear feet of one 3/0 conductor is heavy. Use the lube, but also use a winch.
No. This is way more than enough.
The Klein Tools Foam Wire Pulling Lubricant is a high performance lubricant. 1 can of the foam lubricant is equivalent to 4 quarts of wax or gel lubricant. There are many variables that affect the ease of wire pulling: length of the run, conduit size, wire size, number of bends, distance between bends, temperature, etc. For your application you may need 2 cans of the Foam Lubricant. Pro tip: Prior to pulling wire through conduit, tie a rag tightly to the end of a line, lubricate the rag and pull it through the conduit run. This helps clear debris/lubricate the conduit and will make it easier to pull wire.
I THINK you may be okay. You may want to get to cans just in case.
The range is 40° F to 100° F.
Working Temperature: 40° F to 100° F (4° C to 38° C)
Viewing 1-8 of 11
4.8 out of 5