#1 Home Improvement Retailer

Internet # 326463914

Model # KA.550.28.68.134

Store SKU # 1009979574

32 in. x 80 in. Craftsman Knotty Alder Universal/Reversible 6-Lite Clear Glass Unfinished Solid Wood Front Door Slab

$808.00
Apply Now
Pay $758.00 after $50 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Modern wood front door, supports most keyless smart lock devices
  • Craftsman style door features 6 Low-E clear glass window panes
  • Overhang required for all wood doors, see warranty for details
Store
0 in stock

Free & Easy Returns In Store or Online

Return this item within 90 days of purchase.

Read Return Policy

Product Details

About This Product

Inspired by the Arts and Crafts movement of the mid 19th century, the Craftsman Knotty Alder 6 Lite Exterior Door Slab from Krosswood Doors embraces handcrafted design and simple, yet thoughtfully made architecture. Every door is engineered for strength and longevity, and features natural wood grain, unique knotting, and six clear glass panels to allow natural light into your home. Find your perfect fit today with our customizable size options.

Highlights

  • Door slab measures 32 in. x 80 in.
  • Engineered Knotty Alder stiles and rails ensure quality and durability
  • Full thickness solid panel measuring 1-3/4 in.
  • Center floating panels allow for expansion and contraction to withstand environmental changes
  • Sturdy, doweled construction prevents warping
  • Insulated and tempered safety glass with low-E coating for energy efficiency
  • Features dark, visible knots that enhance the individual beauty of each entry door
  • 1-year limited warranty
  • Arrives as a slab, ready to be primed and stained
  • Wood doors require a stain or finish on all 6 sides to seal properly
  • Trimmable up to ½ an inch from the sides and top, and up to 1 inch from the bottom
  • Must have adequate overhang over door (see warranty for details)
  • Brickmold and interior trim not included
  • Door comes as slab only, no additional components or hardware included
  • Exterior Door Guide
  • https://www.homedepot.com/c/ai/front-door-ideas/9ba683603be9fa5395fab908a627aef
  • Shop All Krosswood Doors
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 326463914

Model # KA.550.28.68.134

Store SKU # 1009979574

Specifications

Dimensions

Door Height (in.)

80 in

Door Thickness (in.)

1.75 in

Door Width (in.)

32 in

Fits Opening Height (in.)

80 to 80 7/8

Fits Opening Width (in.)

32 to 32 3/8

Nominal Door Height (in.)

80 in

Nominal Door Thickness (in.)

2 in

Nominal Door Width (in.)

32 in

Details

Bore Type

No Bore

Color Family

Alder

Color/Finish

Unfinished

Door Configuration

Single Door

Door Glass Insulation

Dual Pane, Low-E, Tempered

Door Handing

Universal/Reversible

Door Style

Craftsman, Mid Century

Door Type

Exterior Slab

Features

Glass Panel, No Additional Features

Finish Type

Unfinished

Glass Caming Finish

No caming

Glass Layout

1/4 Lite

Glass Shape

Square Lite

Glass Style

Clear Glass

Included

Instructions, No Additional Items Included

Material

Wood

Number of Lites

6 Lite

Panel Type

6 Panel

Product Weight (lb.)

95 lb

Returnable

90-Day

Suggested Application

Front

Warranty / Certifications

Energy Star Qualified

Not Qualified

Manufacturer Warranty

1-Year Limited

Questions & Answers

I need an exterior jam with threshold and brick mold. Is that possible?
BySep 11, 2024
1 Answer | 
Answer This Question

Hi Chris, thank you for the question. This particular listing is a slab only and will not come with the door jamb. The link below will take you to the listing for the prehung unit. Please note, this does not come with brickmold. https://www.homedepot.com/p/Krosswood-Doors-36-in-x-80-in-Krosswood-Craftsman-Unfinished-Rustic-knotty-alder-Solid-Wood-Single-Prehung-Front-Door-KW-550-3068-RH/206605451

By|Sep 12, 2024
    0/0


    Hi what kind of wood is ? Is oak , pine ? What is ?
    ByAug 17, 2024
    1 Answer | 
    Answer This Question

    Hi Nico, this door is knotty alder.

    By|Aug 19, 2024
      0/0


      Are hinge locations cut in or is that done in feild to match current locations
      ByMay 17, 2024
      1 Answer | 
      Answer This Question

      Hi there, this door is a slab and will not come with the hinges or bore holes pre-drilled.

      By|Aug 27, 2024
        0/0

        (1)

        My current doors thickness is 1-1/4 inches thick. This door is 1/2 and inch thicker. Would I still be able to replace it?
        ByMay 12, 2024
        2 Answers | 
        Answer This Question

        Hi Mike, this door will not line up with the current door jamb you have. We would recommend replacing the whole unit.

        By|May 13, 2024
          0/0

          Depending on the way your doorframe is constructed you might be able to pop out the door stops and move them over 1/2inch to allow the entire door thickness to fit in the frame when closed. You'd need to extend the hinge mortises in the doorframe as well.

          By|Aug 20, 2024
            0/0


            does this door come with a brick mold frame ??
            ByApr 26, 2024
            1 Answer | 
            Answer This Question

            Hi Jordan, thank you for the question. This is a slab and will not come prehung with a door frame. If you want to purchase this door prehung, please use the following link. One thing to note, the prehung door will not come with a brickmould. https://www.homedepot.com/p/Krosswood-Doors-36-in-x-80-in-Craftsman-Unfinished-Rustic-Knotty-Alder-Solid-Wood-Single-Prehung-Front-Door-KW-550-3068-LH/206605452

            By|Apr 29, 2024
              0/0


              Is the glass beveled?
              ByNov 20, 2023
              1 Answer | 
              Answer This Question

              Yes, this glass is beveled.

              By|Nov 20, 2023
                0/0


                When I say “Can this door be cut down to 35 3/4” x 79” ?” I mean is there anything in the structure of the door that would cause a problem with taking 1/4” off the width and 1” off the height? Say, a facing on the edge or joinery near the bottom? Thanks.
                ByNov 18, 2023
                1 Answer | 
                Answer This Question

                This door is able to be trimmed 1/2" from the top of the door and 1" from the bottom of the door. We do not suggest trimming any more than that.

                By|Nov 20, 2023
                  0/0


                  Can this door be cut down to 35 3/4” x 79” ?
                  ByNov 16, 2023
                  1 Answer | 
                  Answer This Question

                  We do not do cut downs. However, you can trim it yourself.

                  By|Nov 18, 2023
                    0/0

                    (1)

                    Viewing 1-8 of 54

                    Customer Reviews

                    4.5 out of 5

                    • 4.5 out of 58 reviews
                    • 70% recommend this product
                    What Customers Say
                    Summarized by generative AI from text of customer reviews

                    Customers say the door is beautifully constructed and made of solid wood, particularly appreciating the unique knots in the alder wood. Many found it easy to stain and finish, resulting in a stunning final product. However, some customers noted issues with quality control, such as visible knot holes and scratches, which affected their overall satisfaction. Despite these concerns, the door is generally well-received for its aesthetic appeal and sturdy build.

                    Filter by:
                    Showing 1-10 of 58 reviews
                    fingerprints inside double pane windows
                    We really like the look of this door. Unfortunately, there are many fingerprints inside the double pane windows. The manufacturer does not sell replacement panes and did not offer to help rectify this manufacturing defect.
                    by
                    Response from Krosswood DoorsNov 8, 2024
                    Hi Doug, we are sorry that you received your door in this condition. We will be sure to pass your comments along to our quality control department. KrosswoodDoors-HD
                      Be patient - it will pay off!
                      We ordered the slab because we have an old house and it wasn't possible to rip off the original door frame. I am so glad we did, because my handyman had to cut the door to fit our frame. I knew the door had knots, but there were a lot more than anticipated, so my handyman used a wood filler. Unfortunately, he didn't use a stainable wood filler so when we went to stain it, it looked terrible. I actually liked the original color of the door, so I had him sand the whole thing back down. Instead of re-staining, we decided to finish it with a clear coat for protection. We used Minwax Helmsman Spar Urethane water based stain in Clear Semi-Gloss. **note, you will need to do a light sand in between coats. The final product is PHENOMENAL! It truly is so beautiful and the door of my dreams. Although there was more headache in the process than anticipated, in the end, it paid off.
                      by
                      Response from Krosswood DoorsFeb 21, 2022
                      We're glad to hear that in the end you are happy with your product. KrosswoodDoors-HD
                        • Recommended
                        3 found this review helpful
                        The perfect affordable Craftsman style door
                        My husband & I aren’t what you’d call ‘crafty’, so after reading commentary online about how splotchy knotty alder can be, I was nervous to stain & seal this door. As recommended by the manufacturer in the Q&A, we used a Minwax cherry stain & Marine Spar polyurethane satin finish (I think we did 3-4 coats) to seal. The cherry stain imparts a reddish hue, then the poly adds a yellowish tint to create the rich, warm finish we wanted. The only negative comment I have is that the door has swelled quite a bit since installation & will have to be shaved. We used to have a solid wood door & we’re looking forward to not having to worry about the monumental swelling, but in spite of sealing it up tight with poly, this door swells just as much (if not more that) as the old one. All in all though, it’s a fantastic door & you can’t beat the price!
                        by
                        Response from Krosswood DoorsJul 22, 2021
                        Thank you for your review of Krosswood Doors. KrosswoodDoors-HD
                          • Recommended
                          2 found this review helpful
                          The knots are so big and so deep you can clearly see daylight through four of them on our front d...
                          The knots are so big and so deep you can clearly see daylight through four of them on our front door. Beautiful door, but they should have done a better job with the finishing of the door. This is listed as an exterior door, it shouldn’t let the elements into the house...
                          by
                          Response from Krosswood DoorsFeb 15, 2021
                          These doors do come with the natural wood knots. We fill them with wood chips and epoxy. This is the unique charm. If you can see daylight through the knots please contact customer service and we will be happy to assist you. KrosswoodDoors-HD
                            4 found this review helpful
                            The door, in the end, looks pretty good. And, more...
                            The door, in the end, looks pretty good. And, more importantly, it fit my very specific needs - but before buying this door, please read my review. I have a 50-year-old house that had its original front door. The wood surrounding the door was in excellent shape and the door itself was a weird size - 35.25 x 78.75 (because it was custom made originally) so I either needed a wood slab door that I could cut to size or a custom prehung fiberglass door made to size. Since it was going to be a difference of several thousand dollars once the installation cost was factored in, I decided to go with the wood door; and in that case, the door was exceptional - 5 stars. But this door was in no way ready to be painted/stained and installed. When HD called it "knotty alder", I assumed (based on the pictures that HD posted) that it would have some dark spots that I could prime and paint over. Boy was I wrong. The door I received had multiple knots that went 1/2" into the depth of the door - sometimes the knots were in the same location on each side of the door. I had told my contractor that I would paint the door before he came out to cut it down and install it; but little did I know that I spend several hours having to fill in holes, wait 2 days for it to dry, then spend time sanding it before I could even prime and paint it. I also underestimated how deep some of the natural splits were in the wood and I assumed (incorrectly) that the primer and paint would fill those - by the time I realized that some of them would show in the final production, it was too late to fix them. 2-stars My other issue with the door is that when the door was assembled in the factory, someone handled the glass with bare hands and there are smudge marks on the inside of the two layers of glass that I have no way of cleaning out. 0-stars. Ultimately, I like the door a lot. I see all the flaws, but probably no one else will. And I spent considerably less money on getting a new door and casing fabricated. If you are going to buy this door make sure that you are prepared to fully "finish" it - possibly fill in all holes and cracks with wood putty and have a small personal sander with a fine-grit sandpaper. I will say that painting the latticework at the top was really easy - no taping required - just let it completely dry and scrape off any paint on the glass with a fine razor blade. I tried to post several pictures of the door in various stages, but HD will only let me post 1 image - so I picked this image so you can see how much wood fill just one side needed.
                            by
                            Response from Krosswood DoorsApr 8, 2020
                            We are sorry to hear that you that the door was not what you thought. This door is a rustic knotty alder with natural wood knots. It is beautiful if you stain it and are looking for that particular look. That being said, this door can be painted but will require filling in the natural knots and sanding multiple times. We would love to see pictures of your finished project. KrosswoodDoors-HD
                            • Verified Purchase
                            26 found this review helpful
                            The door was damaged on delivery and had to be repaired
                            by
                            • Verified Purchase
                            This customer chose to rate the product and not provide text.
                            by
                            • Verified Purchase
                            This customer chose to rate the product and not provide text.
                            by
                            • Verified Purchase
                            This customer chose to rate the product and not provide text.
                            by
                            • Verified Purchase
                            The door had several gouges in it. When spending that much, I expected better quality.
                            by
                            Response from Krosswood DoorsMay 22, 2024
                            Hi Lisa, we are sorry you received your door in this condition. Would you mind sharing photos with us so we can see the issues and make sure they are given to the correct department? Please send them to info@krosswood.com KrosswoodDoors-HD
                            • Verified Purchase
                            Showing 1-10 of 58 reviews