A: Thank you for the question. Loctite Power Grab All Purpose Construction Adhesive in a 1-gallon pail is designed for 100% surface coverage with the appropriate trowel. Please review the Technical Data Sheet for this product at www.loctiteproducts.com for more details. Your results will also depend upon the structural integrity of the ceiling. If you need further assistance, please reach out to our Help Line at 1-800-624-7767 and ask to talk with an Applications Engineer.
A: In my opinion this is not the best product for that type of project. I recommend a sanded tile Mastic
A: Thank you for the question. Loctite Power Grab All-Purpose Construction Adhesive is not well suited for the intended use of application. Depending on the details of your project, a polyurethane based adhesive, such as Loctite PL Premium 3x, may be used in a repair situation. If you need additional assistance, please reach out to our technical team at 1-800-624-7767.
A: Thank you for the question. Normal dry time for Loctite Power Grab All-Purpose Construction Adhesive, in most applications, can be achieved in about 12 hours or more depending upon the porosity of the substrates being bonded. At least one bonding surface must be porous. Applications on low porosity surfaces may take 7 days or longer to achieve full strength. Dry time is dependent on temperature, humidity, porosity of substrate, and amount of adhesive applied.
A: Thank you for the question. Loctite Power Grab All Purpose Construction Adhesive is not well suited for use on most cement backer boards and would not be recommended. This is not to say you cannot try but without knowing the project details and because there are several types of backer boards available on the market it is not possible to predict your results. It is recommended that you test your intended application first to determine suitable and acceptable results before starting the project.