Exclusive

Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Coolguard is a powerful, high performance 100% acrylic elastomeric roof sealer that uses Thermaflex technology to significantly reduce interior temperatures. The Thermaflex formula contains tiny insulating micro-spheres that dramatically increase in size as the temperature of the sealer rises, which prevents heat from being absorbed by the surface. This single-component acrylic urethane product reflects UV rays to reduce heat and provides a single monolithic layer that waterproofs and insulates the surface. It applies and dries ultra-white.
Coverage Area (sq. ft.): 250 sq ft
Coverage Area (sq. ft.) | 250 sq ft |
|---|
Application Method | Brush On, Roll On, Spray On, Squeegee |
|---|---|
Approximate Coverage Per Gallon (sq. ft) | 50 |
Coating Base | Acrylic |
Cold Applied | Cold Applied |
Color Family | White |
Features | Cool Roof Certified, High Reflectivity, High Wind Resistant, Mildew Resistant, Paintable, Rust Resistant, Water Resistant, Waterproof |
Fire Rating (UL 790) | No Rating Available |
Number per Package | 1 |
Package Size (gallons) | 5 gal |
Returnable | 90-Day |
Roofing Product Type | Reflective Roof Coating |
Surface Recommended | Coated Roofs, Concrete Roofs, Concrete/Masonry, Metal, Metal Roofs, Mobile Home Roof, Rubberrized-Asphalt, Rubberrized-Mastic, Rv Roof, Trailer Roof, Wood |
Manufacturer Warranty | The manufacturers liability in connection with thesale of this product extends only to the replacement price if it should fail tocomply with quality standards or specifications. Protect from freezing. |
|---|
Hi Bigft, Coolguard is a premium insulating reflective coating developed for energy savings and waterproofing on roof types such as: Aged single-ply membranes like EPDM, TPO, PVC, and Hypalon, and Specialty surfaces like RVs, trailers, and mobile home roofs. For Aged Single-Ply Membranes: Remove all dirt, oxidation, and chalking with detergent or approved cleaner, then rinse thoroughly. For weathered or lowenergy surfaces (especially EPDM and TPO), perform adhesion tests before full application to determine if a primer is needed. Ensure all laps, screw heads, penetrations, and joints are properly prepared by covering with Siliconizer SL CC784 or Siliconizer Crack Filler RC230. Use in combination with Fiberglass Mesh FM995 for added reinforcement. In case you need or decide to use a primer, we suggest the Aqua-Proof Primer.
Coolguard absorbs puddles of water that dry 4 to 9 hours after it rains?
Hi Juan, Coolguard is a premium insulating reflective coating developed for energy savings and waterproofing on various roof substrates. It is not intended for underwater projects, or roofs with ponding water.
Hi PRESSHA, we do not recommend the Coolguard for foot traffic. Roof coatings are not suitable for foot traffic. Someone occasionally walking on it for maintenance: I would consider that different from a roof designed as a walkway, but you should not treat CoolGuard as a walkable floor coating. Plus have to be careful when it is wet it is slippery. If you expect someone to walk on the roof periodically to inspect equipment, clean it, etc., I would recommend creating designated walk paths/pads rather than walking directly on the CoolGuard coating.
Hi Bobby, the Coolguard is intended for a variety of roof substrates,including the RV Roof, but it should not be applied over 100% silicone roof coatings. The roof should also be clean, dry, and any cracks or leaks repaired before coating.
Hi Gloria,you could use the Coolguard on the bottom side of metal roofing, but that was not the purpose of the product. CoolGuard's cooling effect comes from reflecting solar radiation before it heats the metal. When it's applied to the top (sun-facing) side of the roof, it can reflect a large portion of the sun's energy and reduce heat transfer into the building. Plus sealing the roof.
Hi John, you can use a 3/4" Nap Rough Surface Roller .
Hi Sky Valley, yes the Coolguard can be painted on top. But for painting on your exterior walls of a California room Dry-Coat, you can also use the Dry-Coat in the interior.
Hi Dean, The Lanco Coolguard is a high-performance 100% elastomeric acrylic urethane hybrid. It is one of our premier solutions, particularly for projects that require both extreme waterproofing and substantial energy savings. Temperature Reduction and Insulation is a factor of Coolguard that distinguishes itself by reducing interior temperatures in two distinct ways: - Reflective Finish: Its ultra-white finish reflects 87% of solar rays and heat transfer. - Thermaflex Technology: This feature incorporates nano-sized insulating micro-spheres that prevent heat absorption into the substrate.
Viewing 1-8 of 308
4.6 out of 5