Model # PS5466XCCV4

Internet #202664478

Store SKU #571800

Legrand Pass and Seymour 20 Amp 250-Volt Plug
0785007017571

Legrand Pass and Seymour

20 Amp 250-Volt Plug

  • Fast and easy to install
  • Durable construction stands up to impacts, chemicals, and weather
  • Large ribs on body for a superor grip when mating
$999 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

  • Fast and easy to install
  • Durable construction stands up to impacts, chemicals, and weather
  • Large ribs on body for a superor grip when mating
Connect electrical devices to a NEMA 6-20 compatible outlet with the Pass & Seymour/Legrand 20 Amp 250-Volt Plug and Connector. It offers a durable nylon construction. Unit arrives completely ready-to-wire, cutting installation time significantly. Internal dust shield keeps terminals free of contaminants.
  • 250-Volt capacity
  • CSA listed
  • All 3-wire terminals located on the same plane, allows for quick wire termination from any angle
  • Cord-grip screws recessed to protect installer against screwdriver head slippage
  • Tri-drive assembly screws are standard on all Specification Grade plugs and connectors
  • Cord diameter: .230 in. -.720 in.
  • Heavy-duty brass alloy blades and contacts, resist heat rise, provide excellent conductivity
  • NEMA 6-20P
  • Buy American act status: trade agreement act compliant
  • Note: product may vary by store

Product Overview

  • Fast and easy to install
  • Durable construction stands up to impacts, chemicals, and weather
  • Large ribs on body for a superor grip when mating
Model #: PS5466XCCV4
Sku #: 571800
Internet #: 202664478

Connect electrical devices to a NEMA 6-20 compatible outlet with the Pass & Seymour/Legrand 20 Amp 250-Volt Plug and Connector. It offers a durable nylon construction. Unit arrives completely ready-to-wire, cutting installation time significantly. Internal dust shield keeps terminals free of contaminants.

  • 250-Volt capacity
  • CSA listed
  • All 3-wire terminals located on the same plane, allows for quick wire termination from any angle
  • Cord-grip screws recessed to protect installer against screwdriver head slippage
  • Tri-drive assembly screws are standard on all Specification Grade plugs and connectors
  • Cord diameter: .230 in. -.720 in.
  • Heavy-duty brass alloy blades and contacts, resist heat rise, provide excellent conductivity
  • NEMA 6-20P
  • Buy American act status: trade agreement act compliant
  • Note: product may vary by store

Compare Similar

Price
$8.68 /each
$9.99 /each
$11.49 /each
$21.35 /each
Name 15 Amp 125-Volt Industrial-Grade Straight Plug 20 Amp 250-Volt Plug 15 Amp 125-Volt Industrial-Grade Angle Plugs 20 Amp 250-Volt Ground Circuit Monitor Plug
Brand Legrand Pass and Seymour Legrand Pass and Seymour Legrand Pass & Seymour Legrand Pass & Seymour
Ratings (20) (13) (34) (0)
Connection Type Straight plug Straight plug Straight plug Straight plug
Maximum Amperage (amps) 15 20 15 20
Electrical Features No Additional Features No Additional Features No Additional Features No Additional Features
Voltage (volts) 125 250 125 250
Plug/Connector Plug Plug Plug Plug
View Product View Product View Product View Product

Specifications

Dimensions

Product Depth (in.)
1.752
Product Height (in.)
1.516
Product Width (in.)
1.516

Details

Color Family
Black
Color/Finish
Black & White
Commercial / Residential
Commercial / Residential
Connection Type
Straight plug
Electrical Features
No Additional Features
Material
Nylon
Maximum Amperage (amps)
20
Package Quantity
1
Plug/Connector
Plug
Product Weight (lb.)
0.25lb
Returnable
90-Day
UL Listing
1-UL Listed
Voltage (volts)
250

Warranty / Certifications

Certifications and Listings
1-UL Listed,CSA Listed
Manufacturer Warranty
1 year

Specifications

Dimensions

Product Depth (in.)
1.752
Product Height (in.)
1.516
Product Width (in.)
1.516

Details

Color Family
Black
Color/Finish
Black & White
Commercial / Residential
Commercial / Residential
Connection Type
Straight plug
Electrical Features
No Additional Features
Material
Nylon
Maximum Amperage (amps)
20
Package Quantity
1
Plug/Connector
Plug
Product Weight (lb.)
0.25lb
Returnable
90-Day
UL Listing
1-UL Listed
Voltage (volts)
250

Warranty / Certifications

Certifications and Listings
1-UL Listed,CSA Listed
Manufacturer Warranty
1 year

Questions & Answers

Wiring Diagram

I sold my new Delta Unisaw which operated on 220v using this type plug. I just bought a Rigid R4512 table saw at HD to replace the Unisaw. I followed Rigid's instructions and changed the voltage on the new saw to 220. Now I need some help wiring this plug. I know the green wire is ground and connects to the green terminal, but which terminals do the black and white wires belong to??? Thanks! Gary
Asked by: GDO
I installed mine on a 220v commercial cooler with the black wire on the "sideways terminal" and it worked great but it might be a good idea to check the wiring on the outlet just to be sure.
Answered by: John
Date published: 2017-02-07

using the 220 adapter?

ONCE PLUGGED INTO THE WALL IS THE OPPOSITE SIDE OF THIS ADAPTER FOR A REGULAR 110 PLUG? I HAVE A 15,000 BTU AC THAT I WANT TO PLUG INTO THE 220 BUT THE CORD ON THE AC IS SHAPED FOR A 110 OUTLET! WILL THIS ADAPTER WORK?
Asked by: CHRISSY
Something sounds very wrong if the plug is a110 volt with two blades going vertical if you look at it with the round prong down then it's not a 220 plug. it should be one vertical and one horizontal. I would advise you to either get an electrician or an inexpensive multi meter and follow the directions supplied with the meter as well as a you tube video ( just search 220 volt plug installation on you tube). don't proceed without full understanding which you will gain from following this insight. if you hook a 110 volt to 220 volts it will fry the machine.
Answered by: Nail65
Date published: 2016-08-31

The plug shown is not compatible with the recipticles

The plug has the odd blade in the opposite side as the receptacles odd input. You can not plug into that receptacle and have the ground terminal on the proper side to engage. What gives?
Asked by: thenar
You are using the wrong plug then. These plugs are made for 20amp 250 volt receptacles. The 6-20R receptacle looks a little different form the 6-20P plug. The receptacle has t shaped slot where the vertical prong of the plug goes in. The plug itself does not have a T shaped slot. This plug will not fit in a standard 120v receptacle nor will it fit in a 30amp 240v receptacle. The plugs are manufactured this way so people do not plug something into a receptacle that carries more or less voltage than what is needed. If you look at the receptacle itself. There should be small markings in the middle of it. It should say 20A 250V. If it has any other numbers then you are using the wrong plug.
Answered by: diversity210
Date published: 2016-11-14

i seat in outlet the straight spade go red o black and the white wite go in flat spade this is ok or is wrong

Asked by: pio
That's not the way I've hooked mine up, check the wiring in your outlet.
Answered by: John
Date published: 2017-02-07
  • y_2018, m_1, d_17, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_202664478, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 13ms
  • QUESTIONS, PRODUCT

Customer Reviews

20 Amp 250-Volt Plug is rated 4.8 out of 5 by 13.
Rated 3 out of 5 by from 3 Star Review Rating provided by a verified purchaser
Date published: 2017-04-04
Rated 5 out of 5 by from Good heavy duty plug, easy to install Good heavy duty plug, easy to install
Date published: 2017-02-07
Rated 5 out of 5 by from great This is a well made cord cap. It went together well and should take a lot of abuse. It clamps down tight to the cord to prevent being pulled off.
Date published: 2015-01-20
Rated 5 out of 5 by from Does what it is supposed to do. Works fine, easy to install. The wires inside are not "wrap around" but have a little plate that clamps down upon them and is secured with a machine screw, making it easy to attach the braided wires.
Date published: 2016-09-13
Rated 5 out of 5 by from These are by far the best plugs I have used. Though they are not called Legrand Pass & Seymour. ... These are by far the best plugs I have used. Though they are not called Legrand Pass & Seymour. In the store they are branded as Hubble. I always make my own extension cords. As you just get more for your money when you make your own and anyone who has ever purchased an extension cord knows. They are not cheap. Anyway purchased these plugs along with 25 feet of 12/3 SJOOW cable, to power my 3HP table saw. Used 10 feet of the cable to make the extension for my table saw and the other I used to make a 15 foot extension just to have around the shop. The plug is very good quality and very well thought out. The picture does not show the shroud that covers the leading end of the cable once you have it installed in the terminals. The shroud has a rubber grommet for the cable to go through that keeps out moisture and dust. The terminals are very use to get the wire snug into. What I liked most about this plug is that it is configure in such a way that when you tighten down the shroud with the 3 screws it has jaws that automatically are pressed in as you tighten the screws and grab the extension cord rendering it almost impossible to pull back out unless you remove the 3 screws.
Date published: 2016-11-14
Rated 5 out of 5 by from ecact fit Perfect for the job. No troubles to assemble. Fit the bill
Date published: 2016-03-16
Rated 5 out of 5 by from Helped out in a jam and it worked great. Easy install and well built. Make sure you strip trim the cord to the right length before tightening down.
Date published: 2015-08-25
Rated 5 out of 5 by from Plug Install Easy to install and great quality at a reasonable cost.
Date published: 2016-01-26
  • y_2018, m_1, d_17, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_, sid_202664478, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 14ms
  • REVIEWS, PRODUCT