A:  I wouldn't

A:  NO IT IS NOT THE SAME PLUG

A:  Yes, this plug would be compatible if the electric appliance uses 30 amps at 120V.

A:  No, probably not. Electric dryers typically require a 30 A 240 V circuit. This plug and its mating receptacle are for 30 A 120 V. The 240 V circuit requires a 2 pole breaker in residential service entrance panels. 30 A 120 V only requires a single pole breaker. If you are unsure of how to wire this circuit, I would suggest hiring an electrician.

A:  The prongs in mine were in a plastic bag inside the box. I had to go back and look for mine inside the box. If you didn't look, you might accidentally throw them away with the box.

A:  Yes, it should come with the prongs

A:  Yes prongs are included but they are in a separate bag within the package.

A:  yes but poor fit for ground pin

A:  Yes it does. Someone might have removed them from the box at the store.

A:  This requires some basic tools and skills. You might have to cut off the old plug from your power cord. Cut back the black insulation from the power cord about 4 - 5 inches from the end, being careful not to cut too deep and into the wire insulation of the 3 wires encased in the power cord. Now cut the white and black wires to the lengths shown in the direction page included with the Leviton plug. Once those are cut to length, strip the insulation off all three wires per the directions (see illustration) and twist each wire individually and connect to the individual prong per the wiring instructions. Assemble the plug.

A:  THERE ARE VERY GOOD PICTURES AND INSTRUCTIONS WITH THE PLUG. ALL YOU HAVE TO DO IS CUT OFF THE OLD PLUG. THEN FOLLOWING THE PRINTED INSTRUCTIONS, STRIP BACK THE OUTER INSULATION ON THE WIRE BEING VERY CAREFUL TO NOT CUT THE INSULATION ON THE INNER WIRES. STRIP BACK THE INNER WIRES TO 3/4 OF AN INCH LEAVING THE GREEN WIRE LONGER THAT THE OTHER TWO. THEN ATTACH THE WIRES TO THE PRONGS PROVIDED. WATCH OUT FOR THE PROPER COLOR WIRE TO WHICH PIN. FOLLOW THE INSTRUCTIONS EXACTLY. FI YOU ARE NOT COMFORTABLE DOING THIS WIRING, PLEASE HAVE AN ELECTRICIAN DO THE WORK FOR YOU.

A:  For installation support, please call Leviton at 1-800-824-3005.

A:  Buy an alternate brand

A:  The instructions for hooking it up come with the plug. Just follow them exactly.