#1 Home Improvement Retailer
Home
Tools
Welding & Soldering
Brazing & Soldering Equipment
Solder
Solder Flux

Internet #

100672838

Model #

SBSKPOP

Solder Stay-Brite Kit with Flux

(47)Questions & Answers (20)
$1596
  • Kit contains tin-silver wire and 1/2 oz. Stay Clean liquid flux
  • Bonds most all metals except aluminum and magnesium
  • Excellent choice for many soldering applications
  • View More Details
caret

Product Details

A low melting, (430°F), tin-silver alloy in convenient kit form. Kit contains 1/2 oz. (3/64 in. Dia) wire and 1/2 oz. Stay Clean liquid flux. Excellent choice for all applications. Suitable for food contact, (NSF Standard 51). Meets ASTM B32.
  • Tin/silver alloy and flux in a convenient kit
  • Bonds most all metals except aluminum and magnesium
  • Excellent high-strength, high-ductility solder for all purposes
  • Listed with the National Sanitation Foundation (NSF) for food contact applications
  • Return Policy
caret

Specifications

caret

Questions & Answers

20Questions
caret
Q:Can I use this on the aluminum brazing rod?
by|Mar 1, 2022
1 Answer
Answer This Question

A:  You will not be able to use this on aluminum brazing rod.

by|Mar 2, 2022
    caret
    Q:Under Info & Guides, the Use & Care Manual, Why is it the MSDS for Rosin Core Solder when this ha...
    by|May 17, 2021
    0 Answer
    Answer This Question
    caret
    Q:Can I use this to solder hvac lines and if so what type torch do I need? Thanks Mark
    by|Apr 14, 2020
    5 Answers
    Answer This Question

    A:  YES, you can definitely use this kit for copper freon lines. This is the ONLY type of solder and flux (Harris) I know of that you can use on freon lines. Just use a Bernzomatic torch.

    by|Mar 19, 2022
      2 found this answer helpful

      A:  The answer is... maybe. The problem isn't mechanical strength or pressure, but temperature. On a suction line, should be no problem. But if your high-side temperatures get too close to the melting temperature of the solder... look out. What refrigerant(s) will you be using?

      by|Jun 18, 2021
        1 found this answer helpful

        A:  No it will not work. It could potentially ruin your hvac system.

        by|Feb 27, 2023

          A:  No Mark, this is the wrong item for connecting HVAC Freon lines. Your will need to braze them. Make sure your copper lines are cleaned with emery paper, them apply flux. With brazing rod (brass/copper) and a "B" tank of acetylene or it may work with MAPP gas; carefully braze the lines, let cool, and check for leaks. This is harder than you think because the lines are "pre-charged with freon. - Good luck! :-)

          by|Apr 15, 2022
            2 found this answer helpful

            A:  Yes, it can use it to solder HVAC lines.

            by|Aug 5, 2022
              3 found this answer helpful
              caret
              Q:Will this hold together brass to stainless steel?
              by|Jan 18, 2020
              1 Answer
              Answer This Question

              A:  I know it works with brass to brass. I think it should work well with brass to stainless steel. However, you need ample amount of heat - at least MAPP gas or, more preferably, acetylene and oxygen.

              by|Jan 19, 2020
                Showing 1-4 of 20
                caret

                Customer Reviews

                4.5 out of 5
                (47)
                • 4.5
                  out of 47 reviews
                • 93%recommend this product
                Filter by:
                Showing 1-10 of 47 reviews
                Mar 6, 2023
                by
                • Verified Purchase
                Jan 6, 2023
                Worthless
                Don't know why people say this stuff works. It doesn't won't stick to anything but copper.
                by
                  May 5, 2022
                  Works but flu is too runny. Also solder does not...
                  Works but flu is too runny. Also solder does not withstand 300 degrees temperatures. It brittles up and falls off. For cold applications might be fine.
                  by
                  • Verified Purchase
                  Mar 9, 2022
                  by
                  • Verified Purchase
                  Oct 17, 2021
                  Solder for Steel
                  I used this to fix an couple of pin holes in a steel cover for an automatic transmission. I removed the rust and used an emery wheel to grind the area to bare steel. I applied the flux. It did not take too much heat using a mapp torch. I applied the solder and it wetted steel in the area. Worked as shown on youtube. It covered over the area with the pin holes and now the cover is solid again.
                  by
                  • Verified Purchase
                  • Recommended
                  May 3, 2021
                  by
                  • Verified Purchase
                  Apr 21, 2021
                  Works exactly as expected...
                  Works exactly as expected
                  by
                  • Verified Purchase
                  Apr 21, 2021
                  There aren't many affordable solder/flux combos out there that will solder stainless steel. This...
                  There aren't many affordable solder/flux combos out there that will solder stainless steel. This does, though if you've never soldered stainless before, you may use up a decent amount of this before getting it right. If working on sugaring (maple syrup) equipment - make sure you get rid of every bit of niter/sugar.
                  by
                  • Verified Purchase
                  • Recommended
                  1 found this review helpful
                  Apr 9, 2021
                  Followed cleaning instructions, didn’t work , won’t solder...
                  Followed cleaning instructions, didn’t work , won’t solder
                  by
                  • Verified Purchase
                  Apr 2, 2021
                  Rating provided by a verified purchaser...
                  Rating provided by a verified purchaser
                  by
                  • Verified Purchase
                  Showing 1-10 of 47 reviews

                  Frequently Bought Together

                  +
                  +
                  Price:
                  $1596

                  • Compare Similar Solder Flux

                  Stay-Clean 4 oz. Solder Paste
                  current product
                  Solder Stay-Brite Kit with Flux                  		Best SellerSoldering Kit with 1.7 oz. Lead-Free Water Soluble Flux Paste and 4 oz. Silver Solder Wire
                  BrandLincoln ElectricLincoln ElectricOatey
                  NameStay-Clean 4 oz. Solder PasteSolder Stay-Brite Kit with FluxSoldering Kit with 1.7 oz. Lead-Free Water Soluble Flux Paste and 4 oz. Silver Solder Wire
                  Price
                  $964
                  $1596
                  $2441
                  Ratings
                  (9)
                  (47)
                  (382)
                  View ProductView ProductView Product