The Diva LED+ dimmer switch provides optimal dimming performance of LED bulbs. This dimmer switch works with up to 150-Watt of dimmable LED/CFL or 600-Watt of incandescent/halogen, allowing you to control multiple bulb types on the same circuit. It is designed to control a broad range of dimmable LED and CFL bulbs from a variety of brands including Philips, Cree, GE, EcoSmart and Lighting Science. The Diva dimmer switch features a paddle switch to turn your lights off or on returning the lights to your favorite level. This dimmer switch also features a discreet slide control next to the switch, allowing you to adjust the lights for any activity. Coordinating Claro wall plate included.
Tested on 1,000s of bulbs and dozens of brands for flicker-free dimming. For list of recommended bulbs view "Compatibility Chart
Provides over 250 lighting levels so you can create the perfect light for any activity
Works with up to 150 Watts of dimmable LED/CFL bulbs or 600 Watts of Incandescent/Halogen bulbs
Lutron patented technology to optimize the dim range of your bulb and prevent interference with other dimmers in the home
Can be used in single-pole or 3-Way applications, where lights are controlled from one or two locations
Rocker switch turns lights on/off to favorite light level. Discreet slider dims and brightens the lights
Installs in as little as 15 minutes in homes of all ages - NO NEUTRAL REQUIRED
Includes (1) Diva LED+ (formerly C.L) Dimmer Switch and (1) coordinating wallplate
A:Â Hello Wally, thank you for your question. The Diva LED+ dimmer requires a U.S. wallbox 2` in (64 mm)
deep minimum. See the below spec sheet for more information:
https://assets.lutron.com/a/documents/369682.pdf
We hope this helps! If you require further assistance, our 24/7 support team is here to help. We can be reached at 1-844-LUTRON1 or via email at support@lutron.com.
by|Jun 26, 2023
Q:What is the minimum wattage rating for this switch? I'd like to use this for a couple low-watt LED bulbs that won't pull more than 15 watts total, but I can't find the minimum wattage rating.
by|Apr 13, 2023
3 Answers
Answer This Question
A:Â the description of this says 150 watts-why dont people read first? OPEN YOUR EYES!!!!
by|Nov 19, 2023
1 found this answer helpful
A:Â Hello! The minimum load requirement for the DVCL-153P dimmer is either 10 watts of incandescent/halogen or one compatible LED from our LED Compatibility Tool here: https://www.lutron.com/en-US/pages/ledcompatibilitytool/compatibility.aspx
If you still have questions or concerns, please give us a call at 1-844-LUTRON1. We're here 24/7, so you can reach out anytime, day or night.
by|May 13, 2023
A:Â They don't list the minimum wattage because they say different bulbs will have different min. watts. Regardless, this switch is not rated for low-watt LEDs. You'd need a switch made for the type of transformer you are using. Go to lutron.com and look for their "LED compatibility tool". You can search on the brand, model, etc. of your LED bulb to find a switch that will work.
by|Jun 14, 2023
Q:I have two ceiling lights in bathroom both operate on one wall switch. I want to replace one with a dimmable light, but I don?t want to add another box. I want to use one box that can dim and turn on and off the non-dimmable fluorescent light ???
by|Mar 27, 2023
1 Answer
Answer This Question
A:Â Hello, thank you for your inquiry. Unfortunately due to the nature of dimmers providing a dimming signal to whatever they control, one device cannot be capable of dimming one fixture and only turning on and off another, non-dimmable one. If both put on the same dimmer, they will not only interfere with each other, with one being dimmable and one non-dimmable, but could lead to premature failure of the device and/or the non-dimmable light fixture.
We recommend either changing both fixtures to the same dimmable type of light, or using an on/off-only switch if mixing dimmable and non-dimmable fixtures.
We hope this helps! If you require further assistance, our 24/7 support team is here to help. We can be reached at 1-844-LUTRON1 or via email at support@lutron.com.
by|Mar 28, 2023
Q:do these light up slightly when off
by|Mar 18, 2023
1 Answer
Answer This Question
A:Â Hello! Currently, there's no industry standard or regulation for manufacturing LEDs, which is why performance varies with dimming controls. That's why we extensively test a variety of LEDs from many different manufacturers and offer a mobile-friendly web tool to help you select bulbs that provide the best dimming performance with your Lutron dimmers. To access the tool, please visit lutron.com/ledfinder.
If you have additional questions, please reach out to our Support Team at support@lutron.com or give us a call at 1-844-LUTRON1.
by|Mar 21, 2023
Showing 1-4 of 84
Customer Reviews
4.6 out of 5
(957)
4.6
out of 957 reviews
88% recommend this product
5
712
4
143
3
40
2
23
1
39
Filter by:
Showing 1-10 of 957 reviews
Jan 14, 2020
It's doing its job very well.
It's doing its job very well.
by
Verified Purchase
Recommended
Oct 29, 2019
I had a dimmer switch with a knob, which got to where the knob would fall off or would slip when ...
I had a dimmer switch with a knob, which got to where the knob would fall off or would slip when trying to turn the light on. I went with the paddle style because it is much cleaner and the slide for dimmer works great. Some of the dimmers I looked at, did not come with the cover. This one came complete as shown and was very easy to install, replacing the old switch. Plus, it can be used as a 3-way if needed and it works for both LEDs and incandecent lights. I installed it as a single switch and it works great. My wife is very happy with it, so I think that says it all.
by
DIY
Verified Purchase
Recommended
3 found this review helpful
Oct 29, 2019
Great light switch, comes with wire nuts and good installation instructions. Fits right in with ...
Great light switch, comes with wire nuts and good installation instructions. Fits right in with my other switches.
by
Verified Purchase
Recommended
1 found this review helpful
Sep 29, 2019
This Review Is For Lutron Diva C.L. Dimmer Switch and yes i absolutely recommend this product. We...
This Review Is For Lutron Diva C.L. Dimmer Switch and yes i absolutely recommend this product.
We have had this product one day, and has been installed. We are very happy with this Lutron Diva C.L. Dimmer Switch it was very easy to install, and have experienced no buzzing or flickering. We have the switch operating two Ceiling Light Fixtures one with regular screw in LED Bulbs and the other with Non-Replaceable LED Lighting.
In the past i have had issues with dimmers that were suppose to be design for LED Lighting, caused flickering when dimming down low. I did not have this issue with this dimmer switch, and this makes me happy. This Dimmer Switch is also compatible with CF, Halogen and Incandescent bulbs.
But i have only used it for LED Lighting.
It can be used for single pole or 3-way switch replacement. Mounting of course is in-wall. Volts
120, 150 Watts When using LED or CFL's, 600 Watts when using Halogen or Incandescent Bulbs.
If you are having issues with flickering or buzzing, there is a adjustment dial that you can adjust to
stop the flickering and buzzing. It also allows you too adjust how low you can dim without causing flickering or buzzing. We have only had it for a short period of time but have confidence that this dimmer switch is a good quality product that will last for years. We are happy with the adjustment range of dimming that ours is set for.
Installation is basic and straight forward the only tools you should need is a flat head screwdriver, and a Philips screwdriver. We are very happy with this product it has met our expectations and do recommend it.
by
Recommended
105 found this review helpful
Aug 16, 2018
We have at least 6 of these in the house. These are the easiest to install, work every time and ...
We have at least 6 of these in the house. These are the easiest to install, work every time and are great with LED lights. Easy to clean too!!
by
DIY
Verified Purchase
Recommended
Aug 7, 2018
Very easy to install
Very easy to install
by
Verified Purchase
Recommended
2 found this review helpful
Feb 13, 2018
Easy to install. ...
Easy to install.
by
Verified Purchase
1 found this review helpful
Feb 4, 2018
Easy to install. I did it in 5 mins. Lutron has videos online if you need extra assistance.
Easy to install. I did it in 5 mins. Lutron has videos online if you need extra assistance.
by
Verified Purchase
Recommended
Jan 8, 2018
Easy to install and comes with its own plate and screws, I like that it the screws do not show on...
Easy to install and comes with its own plate and screws, I like that it the screws do not show on the plate and if you want to use it on a 3 way it works. I got this dimmer since I have LED lights and the dimmers offer good light low to high. like it.
by
Recommended
1 found this review helpful
Dec 5, 2017
Easy install in both single and 3-way circuit. For replacing a 3-way switch, be sure to locate an...
Easy install in both single and 3-way circuit. For replacing a 3-way switch, be sure to locate and mark the common wire and do not rely on the color of the wires like I did. Works well with LED lights on dimmer. One star subtracted because I still get a hum (much less than the previous dimmer switch) and interference when I turn on the radio.
The Diva LED+ dimmer switch provides optimal dimming performance of LED bulbs. This dimmer switch works with up to 150-Watt of dimmable LED/CFL or 600-Watt of incandescent/halogen, allowing you to control multiple bulb types on the same circuit. It is designed to control a broad range of dimmable LED and CFL bulbs from a variety of brands including Philips, Cree, GE, EcoSmart and Lighting Science. The Diva dimmer switch features a paddle switch to turn your lights off or on returning the lights to your favorite level. This dimmer switch also features a discreet slide control next to the switch, allowing you to adjust the lights for any activity. Coordinating Claro wall plate included.
The Maestro LED+ dimmer switch provides optimal dimming performance of LED bulbs. This dimmer switch works with up to 150-Watt of dimmable LED/CFL or 600-Watt of incandescent/halogen, allowing you to control multiple bulb types on the same circuit. It is designed to control a broad range of dimmable LED and CFL bulbs from a variety of brands including Philips, Cree, GE, EcoSmart and Lighting Science. Use the rocker to adjust the light level for any activity or set the preset level to ensure lights always turn on to your desired light level. Advanced features include delayed fade to off, which allows time to exit a room or to get into bed before the lights turn off. Coordinating Claro wall plate sold separately.
The Maestro LED+ dimmer switch provides optimal dimming performance of LED bulbs. This dimmer switch works with up to 150-Watt of dimmable LED/CFL or 600-Watt of incandescent/halogen, allowing you to control multiple bulb types on the same circuit. It is designed to control a broad range of dimmable LED and CFL bulbs from a variety of brands including Philips, Cree, GE, EcoSmart and Lighting Science. Use the rocker to adjust the light level for any activity or set the preset level to ensure lights always turn on to your desired light level. Advanced features include delayed fade to off, which allows time to exit a room or to get into bed before the lights turn off. Coordinating Claro wall plate sold separately.
The Diva LED+ dimmer switch provides optimal dimming performance of LED bulbs. This dimmer switch works with up to 150-Watt of dimmable LED/CFL or 600-Watt of incandescent/halogen, allowing you to control multiple bulb types on the same circuit. It is designed to control a broad range of dimmable LED and CFL bulbs from a variety of brands including Philips, Cree, GE, EcoSmart and Lighting Science. The Diva dimmer switch features a paddle switch to turn your lights off or on returning the lights to your favorite level. This dimmer switch also features a discreet slide control next to the switch, allowing you to adjust the lights for any activity. Coordinating Claro wall plate sold separately.