#1 Home Improvement Retailer

Maestro Motion Sensor Switch, No Neutral Required, 5-Amp, Single-Pole/Multi-Location, Snow (MS-OPS5M-SW)

$40.76
Apply Now
Pay $15.76 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Motion sensor turns lights on and off when you enter/leave room
  • UL listed to work with all bulb types, including LED bulbs
  • For lights or exhaust fans controlled from one or more location
  • View More Details
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

Let Lutron's Maestro Occupancy Sensor switch turn the lights or fan on and off for you. It's a simple, easy, and low-cost way to save energy and add automation to your home. Install a Maestro Sensor and lights/fan turn on when you enter the room, and then turn off automatically after you leave. It features XCT sensing technology to detect fine motion, such as typing at a desk or reading a book, to ensure lights won't turn off inadvertently when you're still in the room. It also learns your preferred natural light level and keeps lights off with smart ambient light detection. Program your lights to turn off 1, 5, 15, or 30 minutes after you leave the room. Alternatively, you can set the motion sensor to vacancy-only mode to only turn off the lights when you leave a room, to meet Title 24 requirements. Equipped with ambient light detection, you can customize your sensor to detect daylight so lights don't turn on with enough natural light in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install a sensor in your bedroom so lights aren't left on mistakenly or in the bathroom for your exhaust fan. This Maestro Sensor works with any bulb type, including LED bulbs, or fans up to 3 amps. This switch can also be easily programmed to function as a vacancy (manual-on) sensor. Coordinating Claro Wall plates and Accessories sold separately.

Highlights

  • Motion sensor switch automatically turns the lights on when you enter the room and off when you leave; covers major motion in a room up to 900 sq ft
  • Features XCT sensing technology which detects fine motion (up to 20 ft. away), such as typing at a desk or reading, ensuring lights do not turn off inadvertently
  • No neutral wire required
  • Smart Ambient Light Detection: Senses daylight in the room and learns your preferred light level over time, so your lights stay off if it's already bright
  • Programmable time-out of lights - set to turn off 1, 5, 15 or 30 minutes after leaving a room
  • Vacancy-Only Mode: Can be programmed as a vacancy-only sensor to meet Title 24 requirements
  • Can be used in single-pole, 3-way, or multi-location applications (use with MA-AS-WH, sold separately); great for larger rooms like garages, bathrooms, and private offices
  • Installs in as little as 15 minutes; works with up to 600W incandescent, halogen and electronic low-voltage, 450W magnetic low-voltage, 360W LED, 5-Amp ballasts, or 3-Amp fans
  • Includes (1) 5-Amp Maestro sensor switch; coordinating wallplate sold separately
  • Includes (1) 5-Amp Maestro sensor switch; coordinating wallplate sold separately coordinating wallplate sold separately




  • Lutron wiring wizard for installation help for dimmer switches, fan switches, 3 way switches


  • Need installation help? Click here for an interactive step by step wiring guide.
  • Click here for more information on Electronic Recycling Programs
  • Return Policy

Product Information

Internet # 203762945

Model # MS-OPS5M-SW

Specifications

Details

Amperage (A)

5 A

Color Family

White

Color/Finish

Snow

Commercial/Residential

Residential

Compatible Bulb Type

CFL, Halogen, Incandescent, LED

Coverage Area (sq. ft.)

900

Device Style Type

Sensor w/o Wall Plate

Durability

Not Applicable

Electrical Features

Programmable

Field of View

180 Degrees

Function Type

Single Pole

Included

No Additional Items Included

Indoor/Outdoor

Indoor

Material

Resin

Maximum Distance (ft.)

30 ft

Motion Sense Type

Occupancy, Vacancy

Mounting Type

In-Wall

Number of Poles

1

Number of Switches

One

Package Quantity

1

Rating

General Purpose

Returnable

90-Day

Sensing Technology

Passive Infared

Switch Depth (in.)

2.3 in

Switch Height (in.)

4.69 in

Switch Style

Push Button

Switch Width (in.)

2.3 in

Time Delay

1 Min.,15 Min.,30 Min.,5 Min.

Voltage

120 volt

Voltage (V)

120 V

Wattage (W)

600 W

Warranty / Certifications

Certifications and Listings

UL Listed

Manufacturer Warranty

5 Years Limited

Questions & Answers

103Questions
caret
Q:The light stays ON all the time. The lens, bottom portion of the switch, does not blink at all when the button is pressed for 5, 10 or even as long as 30 seconds. Do I need to replace it?
by|Mar 25, 2024
1 Answer
Answer This Question

A:  We're sorry to hear about the issues you're having. We're here to help! Please reach out to our Support Team at support@Lutron.com or give us a call at 1-844-LUTRON1 for assistance.

by|Mar 26, 2024
    caret
    Q:My Lutron wall sensor cuts on but won't cut off
    by|Mar 11, 2024
    1 Answer
    Answer This Question

    A:  Hello Brian, thank you for your feedback. We're sorry to hear about the issue you have encountered with your sensor. We may recommend performing a factory reset on the sensor in order to clear its memory and allow it to time out properly again. See page 5 of the following programming guide for instructions on this procedure: https://assets.lutron.com/a/documents/048461.pdf We also do not recommend putting the sensor within ~10 feet of a Wi-Fi router, as the signal from Wi-Fi-emitting devices can interfere with the sensor's passive infrared sensing and cause false-on triggers. We hope this helps! If you have further questions or issues, our 24/7 support team is here to help. We can be reached at 1-844-LUTRON1

    by|Mar 12, 2024
      caret
      Q:Can I connect 3 of this sensor for 3 different house levels?
      by|Jan 23, 2024
      1 Answer
      Answer This Question

      A:  Thank you for your inquiry. We're here to help! Please reach out to our Support Team at support@Lutron.com or give us a call at 1-844-LUTRON1 for additional assistance.

      by|Jan 24, 2024
        caret
        Q:Will it prevent flickering with my 4' LED garage lights not retrofitted new lights
        by|Jan 6, 2024
        1 Answer
        Answer This Question

        A:  Hello James, thank you for your inquiry! MS-OPS5M is an on/off sensor switch that will work with Incandescent, halogen, and LED fixtures. Unfortunately, we can not guarantee the device will prevent flickering from occurring on your LEDs. But flicking caused by an on/off switch is less likely to occur. If you have additional questions, please reach out to our Support Team at support@lutron.com or give us a call at 1-844-LUTRON1.

        by|Jan 8, 2024
          Showing 1-4 of 103

          Customer Reviews

          4.5 out of 5

          • 4.5 out of 566 reviews
          • 90% recommend this product
          Filter by:
          Showing 1-10 of 566 reviews
          not good
          After one week they stopped working I won’t recommend this product
          by
            • Recommended
            This switch works great
            This Lutron occupancy sensor is great it works just as it’s suppose to and it’s also pretty easy to install. I like that you can program it to different settings. It matches very well with the Lutron screwless wall plate that I have.
            by
              • Recommended
              Works just the way it's supposed to
              I needed this motion sensor switch for a long hallway from the garage to the kitchen. The light switch is not within reach when coming in the door from the driveway, and at night that is an issue since that spot is very dark. I installed this switch at the end of the hallway next to the garage entry and it has solved that problem – the light comes on automatically and I have it set to turn off after 1 minute of no motion. The programming steps are easy and you can set it to turn off 1 minute, 5 minutes, 15 minutes, or 30 minutes after it stops sensing motion. You can set the sensitivity at low or high, although I have not noticed much difference between the two. It is sensitive enough that even my cat will trigger the light once she’s half-way down the hallway; for humans and large dogs it triggers as soon as I enter the hallway from the kitchen, which is 26 feet direct sight from the sensor switch. You can also adjust for daylight sensing, although the end of my hallway is always fairly dim so that setting is not much different in my particular situation (set all preferences BEFORE installing the cover plate.) I felt the directions were easy to understand and I also found several helpful videos online, but once I pulled out my existing switch I found that my wiring setup was a bit different than what the instructions or videos showed – I had a third black wire and no ground wire connected to the existing 3-way switch. I used a contactless voltage detector pen to determine which black wires were hot. I called the Lutron 24/7 tech line and they walked me through the correct wiring configuration for my situation and stayed on the phone until I completed it and confirmed that the switch was working properly. That was awesome! The switch does take a couple of minutes to self-program once you turn the power back on, so don’t panic if it doesn’t work immediately. You can hear a low click when the lights come on – not a big deal for me. A 3-way application like mine requires that you also modify the wiring on the companion switch (clearly stated on step 3 of instructions) - that was very easy and requires no additional supplies. This switch is a total win for me.
              by
                • Recommended
                13 found this review helpful
                Perfect for my attic light - as soon as i open the stairs lights on .stays on as long as im up th...
                Perfect for my attic light - as soon as i open the stairs lights on .stays on as long as im up there than shuts 5 minutes later.
                by
                • Verified Purchase
                • Recommended
                2 found this review helpful
                Installation is somewhat simple, so far it’s working as expected , but if you’re not operating an...
                Installation is somewhat simple, so far it’s working as expected , but if you’re not operating anything other than bulbs you’re better off with a lower priced one unless you also need three way operation cover is extra about $5.00 regular covers don’t work well
                by
                • Verified Purchase
                • Recommended
                3 found this review helpful
                Easy install with easy instruction. It works great. I use it for my outdoor floodlight.
                Easy install with easy instruction. It works great. I use it for my outdoor floodlight.
                by
                Response from THD-CSOApr 2, 2019
                "Dear Valued Home Depot Customer,We have reached out to the manufacturer and their reply is, We're glad to hear you are enjoying your Maestro Sensor switch, Slim! "
                • Verified Purchase
                • Recommended
                Features - auto on motion sensor,customer adjustable Time delay shut off. Easy to follow wiring i...
                Features - auto on motion sensor,customer adjustable Time delay shut off. Easy to follow wiring instructions, even if you are not an electrician. We have Installed four (4) of these in our house over the period of two years. And had Three (3) in our previous house.
                by
                • DIY
                • Verified Purchase
                • Recommended
                1 found this review helpful
                Works as designed. Provides great hands free convenience
                Works as designed. Provides great hands free convenience
                by
                Response from THD Customer ServiceJul 11, 2018
                "Dear Valued Home Depot Customer We are happy to hear you are enjoying the convenience and reliability of your Maestro sensor, Dave! "
                • Verified Purchase
                • Recommended
                Easy install...... Directions to setup the motion on/off timer was a little sketchy, but I figure...
                Easy install...... Directions to setup the motion on/off timer was a little sketchy, but I figured it out on my own.
                by
                Response from THD Customer ServiceMay 18, 2018
                Dear Valued HomeDepot Customer, ​Thank you for your review, Jerry. If you have any Lutron projects in the future with our sensors, be sure to check out the following link to assist you with programming: http://www.lutron.com/TechnicalDocumentLibrary/048461.pdf If you have questions or concerns, we'd be happy to further assist at lutron.com/support via chat or email or our support line at 1-844-LUTRON1. We are here 24/7 so feel free to call anytime!
                • Verified Purchase
                • Recommended
                1 found this review helpful
                Great switch. Very sensitive and turns on lights even though it is partially blocked from view. ...
                Great switch. Very sensitive and turns on lights even though it is partially blocked from view. The switch was used to control 8 4' flouresent fixtures in a locker room. This has really helped to control our utility costs and turn off the lights when the room is unoccupied. Highly recommend.
                by
                • DIY
                • Verified Purchase
                • Recommended
                4 found this review helpful
                Showing 1-10 of 566 reviews

                Compare Similar Items

                current item

                Motion Sense Type

                Occupancy, Vacancy

                Occupancy, Vacancy

                Occupancy, Vacancy

                Occupancy

                Function Type

                Single Pole

                Single Pole

                Single Pole

                Single Pole

                Sensing Technology

                Passive Infared

                Passive Infared

                Passive Infared

                Passive Infared

                Field of View

                180 Degrees

                180 Degrees

                180 Degrees

                180 Degrees

                Electrical Features

                Programmable

                Programmable

                Programmable

                Programmable