Store SO SKU #
A: Hello, thank you for your inquiry. Unfortunately due to the nature of dimmers providing a dimming signal to whatever they control, one device cannot be capable of dimming one fixture and only turning on and off another, non-dimmable one. If both put on the same dimmer, they will not only interfere with each other, with one being dimmable and one non-dimmable, but could lead to premature failure of the device and/or the non-dimmable light fixture. We recommend either changing both fixtures to the same dimmable type of light, or using an on/off-only switch if mixing dimmable and non-dimmable fixtures. We hope this helps! If you require further assistance, our 24/7 support team is here to help. We can be reached at 1-844-LUTRON1 or via email at email@example.com.
A: You have add wiring and have 2 switches.
A: This is a single pole or three way switch.
A: Hello! The CTCL-153P will work in a 4-way application, as long as the device is placed in either the Line or Load side of the circuit. This device cannot be installed in a 4-way junction box as it only has 3-way wiring, so it must be placed at either end of your circuit. You can find more installation information here: https://www.lutron.com/en-US/pages/supportcenter/support.aspx?modelNumber=CTCL-153P&SECTION=Documents&ct=Wiring%20Diagrams If you still have questions or concerns, please give us a call at 1-844-LUTRON1. We're here 24/7, so you can reach out anytime, day or night.
A: Hello Tommy, thank you for your question. 36 LED bulbs at 4.6W a piece is 165.6W total, which is over the rated maximum capacity for this Skylark Contour device. We do not recommend exceeding the device's wattage limit, and we have 250W models of our LED+ dimmers for higher wattage applications such as this, for example our Diva model DVCL-253P seen below: https://www.homedepot.com/p/Lutron-Diva-250W-LED-Dimmer-Switch-for-Dimmable-LED-Halogen-and-Incandescent-Bulbs-Single-Pole-or-3-Way-White-DVCL-253P-WH/205744741 We hope this helps! If you require further assistance, our 24/7 support team is here to help. We can be reached at 1-844-LUTRON1 or via email at firstname.lastname@example.org.
A: Yes it works on the bulbs in my basement
A: Hello Vince, thank you for your inquiry. This LED has not met standards in our compatibility testing with the Skylark Contour LED+ dimmer. We would recommend visiting our LED Compatibility Tool at the link below in order to find all currently available LEDs tested and approved for optimal performance with your dimmer: https://www.lutron.com/en-US/Pages/LEDCompatibilityTool/Compatibility.aspx We hope this helps! If you require further assistance, our 24/7 support team is here to help. We can be reached at 1-844-LUTRON1 or via email at email@example.com.
|Name||Skylark Contour LED+ Dimmer Switch for Dimmable LED Bulbs, Single-Pole/3-Way, Easy-Open Pro Box, White||Skylark LED+ Dimmer Switch for Dimmable LED, Incandescent Bulbs, Single-Pole or 3-Way, Easy-Open Pro Box, White||Diva LED+ Dimmer Switch for Dimmable LED, Halogen and Incandescent Bulbs, Single-Pole or 3-Way, with Wallplate, White||Skylark Contour LED+ Dimmer Switch for Dimmable LED, INC/HAL Bulbs, Single-Pole or 3-Way, with Wallplate White (2-Pack)|
Buy 4 or more $22.47
Buy 4 or more $29.67
|Electrical Features||No Additional Features||No Additional Features||Programmable,Wall Plate Included||No Additional Features|
|Wattage (watts)||150 W||150 W||150 W||150 W|
|Compatible Bulb Type||CFL,Halogen,Incandescent,LED||CFL,Halogen,Incandescent,LED||CFL,Halogen,Incandescent,LED||CFL,Halogen,Incandescent,LED|
|Voltage||120 volt||120 volt||120 volt||120 volt|
|THD SO SKU||1002243135||425107|
|View Product||View Product||View Product||View Product|