I don't no why that wouldn't work. It should.
Yes, all hardware comes with the grab bar and it is easy to install. Instructions are also included.
Hello Carol and thank you for your interest in Moen products. The finish for the Moen Home Care 30 in. x 1-1/2 in. Concealed Screw Grab Bar with SecureMount in White is not power coated; the finish is brushed on. If you have additional questions, please feel free to call us at 800-289-6636. Our business hours are 9:00 a.m.-5:30 p.m. Eastern Time Monday through Friday.
Hello paul and thank you for your interest in Moen products. The Moen Home Care 24 in. x 1-1/2 in. Concealed Screw Grab Bar with SecureMount in Stainless Steel is packaged with the 2” mounting screws. The grab bar is designed for installation into a stud. The SecureMount Anchors are recommended for use in nonstud (hollow-wall) applications per installation instructions. The SecureMount Anchros are old separately. If you have additional questions, please feel free to call us at 800-289-6636.
No, it's got a brushed stainless surface that's not slippery.
Hello Gretel and thank you for your interest in Moen products. The Moen R8918 Home Care 18 in. x 1-1/2 in. Concealed Screw Grab Bar with SecureMount in Stainless Steel bar is not textured. Should you have any additional questions, feel free to call us at 1-800-289-6636. Our current business hours are Monday through Friday from 9:00 am - 5:30 pm (Eastern Time).
Its 2" screw comes with grab bar. Using Philips screwdriver 3/8mm diameter approx.
Depends on the material being drilled. First, use different screws. Moen supplies stainless steel screws, but the heads strip out unless u r careful. if u r drilling thu tile, select a bit just larger than the treads for the tile hole. Then, if you r hitting a stud, just screw into it. If it is to be attached with an anchor, follow those directions.
it is made to be mounted with screws to wood bracings or studs in the wall