Home Care Designer Elite 24 in. x 1-1/4 in. Concealed Screw Grab Bar with SecureMount in Brushed Nickel

It is 19" maximum, from the very top of one bracket to the very bottom of the other. We have it installed vertical in our main bath, along with a couple of the long horizontal ones on the back wall of tub/shower. It's been about 3 years, with light use.

It's brushed nickel and comes with all necessary hardware to install.

Hello Charley and thank you for your interest in Moen products. The Moen Designer 24 in. 1-1/4 in. Stainless-Steel Concealed Screw Grab Bar in Brushed Nickel does not pivot at the flange. If you have additional questions, please call us at 1-800-289-6636; we are available Monday through Friday from 8:00 am – 7:00 pm Eastern Time.

Drill size depends on the anchor you are using, not the tile, although there is less give with tile when trying to put the anchor in. For a grab bar, I would use a butterfly or toggle anchor which snaps open behind the wall if you can hit a stud. It will be a large hole in relation to the screw. And make sure you seal the hole with silicon before finishing if it is inside the wet area.

Hello Bob and thank you for your interest in Moen products. The Moen Designer 24 in. 1-1/4 in. Stainless-Steel Concealed Screw Grab Bar in Brushed Nickel comes with 6 mounting screws and Moen’s Securemount mounting plates that in most installations will accommodate installing each end of the grab bar with 2 screws. Moen’s Securemount Anchors, SMA1000CH allow installation for those bars that don’t match up to the homes stud spacing. Moen’s SecureMount anchors require a 1-1/4” hole be drilled into the wall and 3-1/2” of open space behind the wall for installation. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).

Hello Bob and thank you for your interest in Moen products. The Moen Designer 24 in. 1-1/4 in. Stainless-Steel Concealed Screw Grab Bar in Brushed Nickel comes with hardware for mounting through a finished surface into a stud. Using Moen’s Securemount Anchor system, purchased separately, Moen Securemount Grab Bars can be mounted onto a variety of substrates. These include ½” drywall, ½” drywall with tile, ½” drywall with marble, 5/8” drywall, 5/8” drywall with tile, 5/8” drywall with marble, 1/8” fiberglass tub surround and ¼” fiberglass tub surround. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).

The mounting area is 31/4". Mounting it on the door frame would look bad and not properly fit. I mounted mine up against the door frame. It mounted to a 2 x 4 frame and worked well.See image attached.

Yes i have one mounted in each walls. Work great.

Yes, it can be used in a shower.

Hello Mimi and thank you for your interest in Moen products. The Moen Grab bars have different collections and collection names. Each collection of Grab bar offers different looks, lengths, styles, and features. Should you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 9:00 am – 5:30 pm (Eastern Time).