The Makita 12 Dual-Bevel Sliding Compound Miter Saw with Laser (model LS1219L) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (6-3/4) and crown molding (8 nested). It will also make 15 crosscuts at 90. The saw miters 0 to 60 left and right, with positive stops at 0, 15, 22.5, 31.6, 45 and 60 (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0 to 48 (left and right). The saw is powered by a 15 Amp direct drive motor with soft start, a key point of difference. Direct drive enables smoother start-ups and consistent, constant power with no belts to slip or replace. The electric brake provides added convenience. In addition, the electronic speed control maintains constant speed under load for smoother, higher-quality cutting.
Unique 2-steel rail sliding system design offers single slide-glide operation; reduced saw footprint allows operation flush against a wall
Increased capacity for up to 8 in. crown molding (vertically nested), 6-3/4 in. baseboard (vertical) and 15 in. crosscuts at 90°
In-front bevel lock for convenient operation
Dual dust collection ports provide excellent dust extraction performance
Innovative direct drive motor and guard system is engineered for increased vertical cutting capacity (6-3/4 in.)
Linear ball bearing system engineered to deliver dead-on accurate cuts
Less weight (65 lbs.) and the most compact design in its class for easy jobsite portability
Powerful 15.0 Amp direct drive motor requires less maintenance and delivers 3,200 RPM
Large-sized aluminum base improves stability of material for efficient cutting
Soft start suppresses start-up reaction for smooth start-ups and longer gear life
Miters 0-60 left and right; bevels 0-48 left and right
Positive miter stops at: 0, 15, 22.5, 31.6, 45 and 60 left or right
Electronic speed control maintains constant speed under load for smoother, higher quality cutting
Integrated upper and lower 5-1/2 in. tall fence system offers added rigidity for more precise miter and bevel cuts
Built-in laser clearly indicates line-of-cut whether blade is turning or not; on-off switch and micro-adjustments for precise left-of-blade or right-of-blade cutting
Ergonomic rubberized horizontal D-handle design for better fit and added comfort
Replaceable stainless steel miter scale features large and easy to read markings
Easy to read dual bevel scale for more precise adjustments
A: Dear Valued Home Depot Customer, To better answer your question, please contact the HD.com customer service department at 800-430-3376 call any day between 6 a.m. and 2 p.m. EST, or call your local store, they can either answer your question or transfer you to your local store to answer your specific question.
by|Apr 7, 2023
Q:Will this cut 5.25 inch baseboards?
by|Mar 28, 2023
1 Answer
Answer This Question
A: Thank you for your question. The LS1219L 12" Dual-Bevel Sliding Compound Miter Saw with Laser has a max cutting capacity at 90° of 3-5/8" x 15" and a max cutting capacity at 45° of 3-5/8" x 10-1/2".
by|Apr 4, 2023
1 found this answer helpful
Q:What is the width from left to right? I want to use it with a Bora saw stand.
by|Jan 13, 2023
3 Answers
Answer This Question
A: The base is 17" wide left to right and 14" deep front to rear mounting holes.
by|Apr 10, 2023
1 found this answer helpful
A: 22 1/2” without the extension slides. I removed those to fit in my stand
by|Apr 10, 2023
1 found this answer helpful
A: Thank you for your question on the LS1219L the dimension of this tool are the following. (LxWxH) : 35-1/4" x 26-1/8" x 28-1/2"
by|Jan 17, 2023
Q:Is this a 110volt or 220 volt saw
by|Dec 12, 2022
6 Answers
Answer This Question
A: Thank you for your question on the LS1219L miter saw. Makita USA Corded Tools are rated for US standard 120V outlets.
by|Jan 24, 2023
1 found this answer helpful
A: 110V
by|Dec 15, 2022
A: This is a 110volt saw.
by|Dec 16, 2022
A: It’s 110 volt, but has plenty of power.
by|Dec 15, 2022
A: 110 volt
by|Dec 18, 2022
A: 110 volt ⚡️
by|Dec 16, 2022
Showing 1-4 of 39
Customer Reviews
4.6 out of 5
(161)
4.6
out of 161 reviews
83% recommend this product
5126
423
32
21
19
Filter by:
Showing 1-10 of 161 reviews
Apr 7, 2021
Built like a tank
Just got this saw after having used the 12" sliding Ryobi and the difference is night and day. The dust collection is fantastic and the blade cuts smooth as butter. The soft start and relatively quiet motor make it a pleasure to use. ALSO, please note that this model does not come with those dinky metal bar outfeed supports, it comes with REALLY NICE cast aluminum ones (see photo) that are flat and square, a massive difference from what is shown in these photos. This sucker has been going on sale down to 499 quite often lately so just be patient, it's a killer deal at that price.
by
Recommended
1 found this review helpful
Oct 18, 2020
The laser is extremely accurate. Good range of travel for the saw blade. 12” blade accommodates ...
The laser is extremely accurate. Good range of travel for the saw blade. 12” blade accommodates large pieces of wood. Good two-shute vacuum system. Yep.
by
DIY
Verified Purchase
Recommended
1 found this review helpful
Apr 26, 2023
Fantastic saw. Required minimal adjustment to fences. Cuts straight and...
Fantastic saw. Required minimal adjustment to fences. Cuts straight and smooth with stock blade. Great cutting capacity. Using it for 41/2 in baseboards and getting perfect miters. Excellent dust collection for a miter saw. Overall very happy.
by
Verified Purchase
Mar 21, 2023
This was a replacement for my old (20 year) Makita...
This was a replacement for my old (20 year) Makita 12 inch compound miter saw. The m
have made some valid improvements in that time and this is a solid work tool. It will go 60 degrees either side and up to 48 degrees on the bevel. That is a very good and handy feature. All the handles, locks, guards, safety switches and swivel features work well. It is heavy, which is good but difficult to tote around. Dust collection is fairly good with a strong vacuum but the hold down could be better. It is not cheap but you get a lot for the money. IMHO, it is the best 12 inch available.
by
Verified Purchase
Jan 25, 2023
by
Verified Purchase
Dec 29, 2022
I didn't use yet. If I will not like ,...
I didn't use yet. If I will not like , to be sure I have to turn back because are a lot of money
by
Verified Purchase
1 found this review helpful
Dec 28, 2022
by
Verified Purchase
Nov 16, 2022
Worst saw I’ve ever owned
Never holds true, I have had back to makita 7x under warranty. Motor has gone out. They finally replaced with new saw. Same problems. It grabs materials a lot too
15 Amp 10 in. Dual Bevel Sliding Compound Miter Saw with Laser
The Makita 10 in. Dual Bevel Sliding CompoundThe Makita 10 in. Dual Bevel Sliding Compound Miter Saw with Laser (model LS1019L) delivers large cutting capacity and accuracy right out of the box. With the LS1019L, you will get all the cutting performance you need in a slide compound saw, but with the most compact size in the category for increased portability. With up to 6-5/8 in. capacity (crown molding, nested) jobs like cutting baseboards and crown molding are a snap, but with up to 4-3/4 in. baseboard, capacity, it can cut 4 x 4 dimensional lumber in 1-pass. It's ideal for fine woodworking, carpentry, general construction, and more. The LS1019L is powered by a 15 Amp direct drive motor with soft start, a key point of difference. This means smoother start-ups and consistent, constant power with no belts to slip or replace. The electric brake provides added convenience. The LS1019L will tackle the most demanding jobs while keeping production high.View Full Product Description
18V 5.0Ah X2 LXT Lithium-Ion (36V) Brushless Cordless 10 in. Dual-Bevel Sliding Compound Miter Saw with Laser Kit
Makita is a pioneer in brushless motor engineering,Makita is a pioneer in brushless motor engineering, battery technology, and miter saw innovation and has combined this expertise in the 18V X2 (36V) LXT Lithium-Ion Brushless 10" Dual Bevel Sliding Compound Miter Saw. It's powered by two 18V Lithium-Ion batteries for 36V power and performance, but without leaving the 18V LXT platform. Makita brushless motors are engineered for up to 50% longer run time, increased power and speed, and longer tool life. The XSL06 has an efficient BL Brushless Motor that delivers up to 4,400 RPM for fast and efficient cutting, with Automatic Speed Change technology to adjust cutting speed and torque under load for optimum performance. The XSL06 has a unique 2-steel rail sliding system design that offers single slide-glide operation for smooth and dead-on accurate cutting right out of the box, as well as a reduced overall footprint that allows the saw to be positioned flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity (5-1/4") and crown molding cutting capacity (6-5/8" nested), the largest in its class. It will also crosscut a 4x12 at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0° to 48° (left and right).View Full Product Description
40V max XGT Brushless Cordless 12 in. Dual-Bevel Sliding Compound Miter Saw Kit, AWS Capable (4.0Ah)
The 40V max XGT Brushless 12" Dual-BevelThe 40V max XGT Brushless 12" Dual-Bevel Sliding Compound Miter Saw Kit (GSL04M1) delivers faster and smoother cutting. The rail-forward design maximizes workspace when the miter saw is positioned flush against a wall. The miter saw has a large 3-5/8" x 15" cutting capacity at 90-degrees. The saw miters 0° to 60° left and right and bevels from 0° to 48° (left and right). The efficient brushless motor runs cooler and more efficiently for longer tool life, with direct drive that delivers 3,600 RPM for faster cutting performance, with no belts to slip or replace. Extension wings are included for cutting longer materials, and retract for easier storage. An electric brake provides maximum productivity. An L.E.D. light casts a shadow of the saw blade onto the material for an exact cutting line. For improved efficiency, it is capable of wirelessly starting a connected dust management solution. Auto-start Wireless System (AWS) utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). When the trigger of the AWS-equipped GSL04M1 is engaged, the AWS-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running. An AWS transmitter is needed (sold separately).View Full Product Description
15 Amp 10 in. Dual-Bevel Sliding Compound Miter Saw with Laser and Stand
The Makita 10 Dual-Bevel Sliding CompoundThe Makita 10 Dual-Bevel Sliding Compound Miter Saw with Laser and Stand (model LS1019LX) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (5-1/4) and crown molding (6-5/8 nested), the largest in its class. It will also crosscut a 4x12 at 90°. The saw miters 0 to 60 left and right, with positive stops at 0, 15, 22.5, 31.6, 45 and 60 (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0 to 48 (left and right). Additional features include a high-quality 60T carbide-tipped blade, with a see-through blade guard system for greater visibility of the blade and line-of-cut. The built-in laser indicates the line-of-cut whether the blade is turning or not, and offers micro-adjustments for precise left-of-blade or right-of-blade cutting. For improved dust extraction it has an improved dust collection capability for use with a bag (included) or vacuum (sold separately). It also has a large-sized aluminum base that improves the stability of cutting stock for more efficient cutting. Model LS1019X is a kit and includes a 33.7 lbs. durable compact folding stand with transport wheels and a side handle for easier job site portability.View Full Product Description