#1 Home Improvement Retailer

Internet # 313785699

Model # MAC210Q-AF635

Quiet Series 2 Gal. 1 HP Oil-Free Electric Air Compressor with Pneumatic 15-Gauge, 2-1/2 in. Angled Finish Nailer

Apply Now
Pay $378.00 after $50 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Quiet Series design at only 58 dB is ideal for indoor use
  • Efficient 1/2 HP motor provides max tank pressure of 135 PSI
  • Delivers .7 CFM at 90 PSI for peak productivity
  • View More Details
Free & Easy Returns In Store or Online
Return this item within 30 days of purchase. Read Return Policy

Product Details

About This Product

Compressors are workhorse tools on the job site and in the work shop. Makita Air Compressors are favorites for their faster recovery time, lower noise, longer tool life and consistent performance. The Makita 1 HP, 2 Gal., Oil-Free, Electric Air Compressor (MAC210Q) features a Quiet Series Design, combining strong performance with lower noise. At only 60 dBA, its ideal for indoor use during case and base installation, trim and finish carpentry, cabinet or furniture making and more. The MAC210Q runs at a lower RPM, resulting in longer motor and pump life. It is powered by an efficient 1 horsepower induction motor that provides up to 135 PSI. It also features a lightweight design (only 44 lbs.) for increased portability. The roll-cage construction provides added protection for the pump and motor assembly during transportation, in storage and on the job site. Additional features include a low AMP draw that reduces the incidents of tripped breakers at start-up, as well as an oil-free dual-piston pump designed for maintenance-free operation. This Promotion also comes with a bonus AF635 15-Gauge, 2-1/2 in. Angled Finish Nailer, 34°.


  • MAC210Q - quiet series design at only 60 dB for operator and crew comfort, ideal for indoor use
  • MAC210Q - runs at a lower RPM (1,750) resulting in longer motor and pump life
  • MAC210Q - complete roll-cage construction provides protection to withstand a variety of job-site, transporting and storage environments
  • MAC210Q - oil-free dual-piston pump designed for maintenance-free operation
  • MAC210Q - lightweight design (44 lbs.) for increased job site portability
  • MAC210Q - powerful 1 HP induction motor provides 2 CFM at 90 psi with a maximum tank pressure of 135 psi
  • MAC210Q - quick 65-second full tank fill from empty
  • MAC100Q - low amp draw reduces incidents of tripped breakers at start-up
  • MAC210Q - lever-handle tank drain for easy air tank release
  • MAC210Q - universal brass coupler for increased durability and reduced corrosion
  • MAC210Q - large pressure gauges for easier visibility of tank and hose pressure
  • MAC210Q - cord wrap for convenient AC power cord storage
  • MAC210Q - built-in thermal overload for additional motor protection
  • MAC210Q - ideal for case and base installation, trim and finish carpentry, cabinet and furniture makers and more
  • AF635 - powerful motor drives 15-Gauge DA style angled finish nails from 1-1/4 in. to 2-1/2 in.
  • AF635 - magnesium body, aluminum magazine and cylinder deliver strength and durability
  • AF635 - tool-less depth adjustment for more precise flush and countersink nailing
  • AF635 - nail lock-out mechanism protects tool and work surface from dry-fires
  • Click here to shop for more Makita products
  • Click here for more information on Electronic Recycling Programs
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 313785699

Model # MAC210Q-AF635


Dimensions: H 14.17 in, W 18.03 in, D 17.24 in


Product Depth (in.)

17.24 in

Product Height (in.)

14.17 in

Product Width (in.)

18.03 in


Air Delivery SCFM @ 40PSI


Air Delivery SCFM @ 90PSI


Amperage (A)

7 A

Application Use

Brad Nailing, Finish Nailing, Hobby Nailing, Stapling, Trim

Battery Amp Hours

No Battery


Tool Only

Charger Included

Charger Not Included

Compressor Tank Capacity (gal.)

2 gal

Compressor Type


Compressor Volume Rating


Compressor/Air Tool Features

Automatic Start/Stop, Handle, Oil Free Compressor, Tank Pressure Gauge, Universal Quick Connectors



Decibel Rating (Outdoor)

60 dBA

Horsepower (hp)

1 hp


No additional components or accessories are included

Included in Combo

Compressor Only

Lubrication Type

Oil less

Maximum Pressure (PSI)

135 PSI

Number of Total Batteries Included




Power Source


Power Type

Corded Electric

Product Weight (lb.)

44 lb





Stage Count

Single Stage

Tank Material


Tank Style

Hot Dog

Tools Product Type

Air Compressor

Voltage (V)

120 V

Voltage (v)


Warranty / Certifications

Certifications and Listings

UL Listed

Manufacturer Warranty

1 Year Limited

Questions & Answers

Q:What size air tube can be used?
by|Jun 21, 2024
1 Answer
Answer This Question

A:  Thank you for your question. Please call Makita at 800-462-5482 for more information.

by|Jun 21, 2024
    Q:I recently purchased a Husky 4.5 gal 1.3 hp. compressor rated 3 SCFM @ 90 psi. Is this compressor adequate for the Makita 15ga. finish nailer?
    by|Jun 6, 2024
    1 Answer
    Answer This Question

    A:  Thank you for your question. The AF635 15 gauge 2-1/2" angled finish nailer requires 70 - 120 PSI (4.9 - 8.3 Bar) operating pressure.

    by|Jun 10, 2024
      Q:How much air pressure to operate?
      by|Feb 13, 2024
      1 Answer
      Answer This Question

      A:  Thank you for your question. The AF635 finish nailer is designed with an Operating Air Pressure (PSI) of 70 - 120. The minimum recommended air delivery of 3.1 SCFM @ 90PSI.

      by|Feb 14, 2024
        Q:can you mount this to a wall? and if so are they brackets or mounts avaible to buy to mount it?
        by|Jan 10, 2024
        1 Answer
        Answer This Question

        A:  Thank you for your question on the MAC210Q air compressor. No, we do not recommend operating the compressor on a wall and at this time, Makita does not offer any brackets or mounts for this model.

        by|Jan 12, 2024
          Showing 1-4 of 64

          Customer Reviews

          4.8 out of 5

          • 4.8 out of 340 reviews
          • 95% recommend this product
          Filter by:
          Showing 1-10 of 340 reviews
          Pressure not as specified
          I bought this specifically because of the Makita name and the thought that this would be a quality product. The compressor is as quiet as advertised. The unit is compact and well built. However, the performance of my unit is not as advertised. Cut-out pressure consistently 125psi and cut-in pressure is 95psi. I verified this several times and via 2 separate gauges aside from the unit gauges. Pressure switch stamp confirms it is supposed to be 105-135 as per manufacturer figures. I presented this information to Makita and the tech support was confused as to how this could happen and offered for me to take it to a service center. Having owned compressors, I know this is just a simple screw adjustment on the pressure switch. But nope, the screw has been hot glued to prevent adjustment. At this point, I'd rather return for another but this is all a major inconvenience and quality control should be better than this.
            • Recommended
            35 found this review helpful
            An amazing lite finish nailer
            The first I noticed about the Makita AF635 is how lite it is. But while it is lite it is very well constructed. The Makita AF635 is a rear loading nailer using 15 gauge DA finish strip nails. It will accept 1-1/4" up to 2-1/2". I've been using 2" finish nails for nailing hardwood trim. My supply air runs at 110 pounds and the Makita pounded the nails in the hickory. I had to adjust the depth a little which is an easy task with the Makita AF635. The depth adjustment is located right behind the trigger. Although I haven't experienced a single nail jamb - yet, Makita also made it easy to clear them when they do jamb. There is a tool-less quick release mechanism that allows the guide to be completely opened to clear the jamb. It's also a nice feature for performing maintenance on the gun. You can have full access of the guide to clean and oil. It does also allow for two types of nailing; contact or repeat. Both work flawless. The nail magazine is aluminum and nails slide right in. The nailer includes a rubber shoe on the guide to help minimize marring on already finished material. It comes with an extra shoe that is stored on the nail magazine. Also included is "L" type handle near the rear of the magazine. This is for hanging the nail gun on your belt. The nail gun is so lite, it's a I'm glad it's there, it's no bother to carry. The included case is nice too but it doesn't spend too much time in it. I really like the Makita finish nail gun.
            • Recommended
            3 found this review helpful
            Excellent Air Tool
            Wow, Makita makes a great pneumatic nailer! This tool is light weight, easy to use and performs really well. Depth adjustment is simple and tool less. This nailer has a handy belt hook and a built-in air duster. It is angled for getting into those tight spaces. It has a rubber protective tip that contacts the work without scratching. This model is ideal for putting up baseboard trim and clam-shell moldings around doors and windows. Super easy to load, and it should be east to clear a jam, but it has not jammed on me yet. Great tool!
            • Recommended
            4 found this review helpful
            Very nice.
            I have maybe a dozen air nail guns from various manufactures. This is my first Makita. I'm impressed. My only complaint was, when going from single sequential mode to contact actuation mode, I have to adjust the nail depth. (see pic) The instruction are very easy to understand and the pictures are helpful. Nail loading was very simple and straight forward, but will require both hands. I nailed maybe 4 full clips without a jam. By the way, the nail jam clearance procedure is very, very easy. It's other features worked fine as well. I love the light weight of this unit. Very comfortable holding and using.
            • Recommended
            11 found this review helpful
            Only used it once so far but it is very quiet for an air compressor and seems well built.
            • Verified Purchase
            It’s already malfunctioning. It’s not kicking on when plugged in
            • Verified Purchase
            • Verified Purchase
            • Verified Purchase
            • Verified Purchase
            Perfect for the job!
            In the past I had a different brand compressor. I much prefer this one! Super easy to use and very functional.
              • Recommended
              Showing 1-10 of 340 reviews

              Compare Similar Items

              current item

              Power Source





              Application Use

              Brad Nailing, Finish Nailing, Hobby Nailing, Stapling, Trim

              Air Brushing, Blow Cleaning, Brad Nailing, Finish Nailing, Framing Nailing, Hobby Painting, Inflation, Spraying, Trim

              Blow Cleaning, Brad Nailing, Finish Nailing, Hobby Nailing, Hobby Painting, Stapling, Trim

              Air Brushing, Blow Cleaning, Finish Nailing, Hobby Nailing, Hobby Painting, Inflation, Spraying

              Lubrication Type

              Oil less

              Oil less


              Oil less

              Compressor Tank Capacity (gal.)

              2 gal

              2 gal

              2.6 gal

              8 gal

              Air Delivery SCFM @ 90PSI