French Oak Roseville 20 MIL 7.2 in. x 60 in. Click Lock Waterproof Luxury Vinyl Plank Flooring (23.9 sq. ft./case)

Lakeport has coordinating trims available. • French Oak Lakeport Rigid Core Vinyl Quarter Round - 94.5" Length: INTERNET #:319249052 • French Oak Lakeport Rigid Core Vinyl Flush Stair Nose - 94.5" Length: INTERNET #:319248873 • French Oak Lakeport Rigid Core Vinyl 3in1- 94.5" Length: INTERNET #:319243759. Another option if your using hardwood trims is to take a plank of the flooring to your Home Depot paint department for a custom coordinating stain to be developed.

Not recommended for install over carpet. RIGID VINYL SUBFLOORS: Please follow the detailed Flooring or Molding Installation guide located under “additional resources from the manufacturer” on each product listing page. For further assistance on installation of moldings call our Home Depot Technical Services department @ 800-928-6168. - Approved Subfloors: Concrete, APA rated Plywood & OSB, Particleboard, Ceramic tile, Non Cushioned Sheet Vinyl (single layer). - Non Approved Subfloors: Wood subfloors/Sleepers or Wood flooring installed directly over concrete, Carpet or Carpet Padding, Floating wood or laminate floors, Rubber or Cork floors.

5mm total Thickness = 4mm Rigid Core + 1mm Attached IXPE pad.

Yes, they color Coordinate, the same film used on the floor is used for all Moldings. Malibu Wide Plank Rigid Core Vinyl Moldings are sold in (1) Each quantities. Coordinating Moldings offered are Quarter Round, 3-in-1 (Reducer/Endcap/T-Mold), and Flush Stair Nose in a 94.5” Length.

no it does not. Malibu Wide Plank Rigid Core is Phthalate Free, and FloorScore Certified for indoor air quality. All planks feature a 1mm attached IXPE pad, which stands for 'Irradiated cross-linked polyethylene foam'. It is a very fine closed-cell foam that Is composed of Virgin materials. Great for installation in any climate controlled room in your home. Rigid core is composed of a blend of mainly PVC resin, Calcium Carbonate and a PVC overlay.

Steam Cleaner not recommended. RIGID CLEANING (Use & Care Manual) All Malibu Wide Plank Rigid Vinyl Flooring is very easy to clean and maintain. For all care & Maintenance, please refer to the PDF attachment located under Additional Resources From the Manufacturer on the product listing page and locate USE & CARE Manual: CARE & MAINTENANCE as follows: 1. Sweep, dust mop or vacuum your floor regularly to remove any particles that could cause abrasion or scratch your floor. CAUTION: Vacuums with a beater bar or power rotary brush head can damage a floor and should NOT be used. 2. Apply appropriate cleaning solution to the cleaning cloth / mop. Use a cleaner specifically manufactured for resilient flooring. Do NOT apply directly to the floor. For tougher spots, use a concentration of isopropyl alcohol and distilled water. HINT: For best results, clean the floor in the same direction of the planks. When the cleaning cloth/mop becomes soiled, rinse or replace it with a clean one. Following up with a clean, dry cloth will remove residual streak marks and spots. 3. Do NOT leave any amount of liquids (water, juice, soft drinks, spills, pet urine, etc.) on the floor. Clean any wet spots immediately. 4. Do NOT use a steam cleaner. 5. Do NOT use a wet mop or douse floor with water or liquid cleaners. Liquid can seep between the cracks and cause moisture damage. 6. Do NOT use any cleaning agents containing ammonia, wax, oil or polish. Left over residue will form a dull film. Use a neutral pH cleaner to avoid damage to the finish.Flush stair 7. Do NOT use steel wool or scouring powder which will scratch the floor. RIGID CLEANING (Use & Care Manual) All Malibu Wide Plank Rigid Vinyl Flooring is very easy to clean and maintain. For all care & Maintenance, please refer to the PDF attachment located under Additional Resources From the Manufacturer on the product listing page and locate USE & CARE Manual: CARE & MAINTENANCE as follows: 1. Sweep, dust mop or vacuum your floor regularly to remove any particles that could cause abrasion or scratch your floor. CAUTION: Vacuums with a beater bar or power rotary brush head can damage a floor and should NOT be used. 2. Apply appropriate cleaning solution to the cleaning cloth / mop. Use a cleaner specifically manufactured for resilient flooring. Do NOT apply directly to the floor. For tougher spots, use a concentration of isopropyl alcohol and distilled water. HINT: For best results, clean the floor in the same direction of the planks. When the cleaning cloth/mop becomes soiled, rinse or replace it with a clean one. Following up with a clean, dry cloth will remove residual streak marks and spots. 3. Do NOT leave any amount of liquids (water, juice, soft drinks, spills, pet urine, etc.) on the floor. Clean any wet spots immediately. 4. Do NOT use a steam cleaner. 5. Do NOT use a wet mop or douse floor with water or liquid cleaners. Liquid can seep between the cracks and cause moisture damage. 6. Do NOT use any cleaning agents containing ammonia, wax, oil or polish. Left over residue will form a dull film. Use a neutral pH cleaner to avoid damage to the finish.Flush stair 7. Do NOT use steel wool or scouring powder which will scratch the floor.

Yes, the pad would need to be removed and full spread glue down. the flush stair nose can then be used to coordinate with floor. Please follow the detailed Flooring or Molding Installation guide located under “Info & Guides” on each product listing page. For further assistance on installation of moldings call our Home Depot Technical Services department @ 800-928-6168. FLUSH STAIR NOSE (4.5” WIDE X 94.48” LENGTH). Used when installing Rigid Core Flooring on stairs, providing the finishing touch to the front stair edge. Cut Stair Nose to proper length. Secure Stair Nose to subfloor with Loctite PL 3X (https://www.homedepot.com/p/LOCTITE-PL-Premium-10-fl-oz-Polyurethane-Construction-Adhesive-1390595/202020473) Premium Construction Adhesive (or equivalent) and finish screws (predrill holes in nosing to avoid damage). Apply additional adhesive to the step edge where the nosing meets at the vertical riser/surface to reinforce the nosing. (STEP 1)...Make sure the surface is clean, dust-free, and dry. (STEP 2)...Measure then cut Molding with a hacksaw or power saw. (STEP 3)...Apply adhesive to back of Stair Nose and apply firm and consistent pressure to properly adhere to the subfloor. (STEP 4)...Wait 24 hours to walk on.

Malibu Wide Plank Rigid Core Vinyl Flooring 7.17” Wide x 60” Length + 1mm Pad or 9.13” Wide x 60” Length + 1mm Pad features a 1mm thick pre-attached underlayment included for a floor that is durable, quiet, comfortable, and warm to walk on. The STC and IIC Ratings are outlined below: - Sound Transmission Class over 6” Concrete Slab: STC Rating = 56 - Sound transmission Class over 6” Concrete Slab + Drop Ceiling: STC Rating = 59 - Impact Sound Transmission over 6” Concrete Slab: IIC Rating = 57 Under “Additional Resources” from the Manufacturer, click on the “Specification” hyperlink and download the PDF attachment which contains the detail on STC & IIC.