#1 Home Improvement Retailer

Internet #202865543

Model #MAD24X48

24 in. x 48 in. Maintenance Access Door

$18556
Apply Now
Pay $160.56 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Creates maintenance access to inaccessible areas
  • Sturdy steel construction
  • Access door is easily paintable and stainable
caret

Product Details

Master Flow's Access Door creates maintenance access to normally inaccessible areas. It is made of paintable steel material. All Steel Construction. Rough opening size is 24 in. X 48 in. - Door opens to 23 in. X 47 in.
  • Wide flange surrounds to ensures secure installation with tolerance for size
  • Sturdy steel construction with 1/4 turn speed latches
  • Installs in drywall or plasterboard
  • Made of paintable steel material
  • Return Policy

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
caret

Specifications

caret

Questions & Answers

38Questions
caret
Q:Does this have insulation properties that would allow it to be installed between a garage & pantry?
by|Jan 27, 2023
2 Answers
Answer This Question

A:  This door is not insulated. If you have any other inquiries about our Master Flow products please email warrantyllbp@gaf.com

by|Jan 30, 2023

    A:  The door does have a foam sheet attached to back of door 3/4” but it could use Some foam edge insulation around it,

    by|Jan 30, 2023
      caret
      Q:Where can I get a floor trap door? 36x48 a countersunk latch. One that can be walked on
      by|Sep 4, 2022
      1 Answer
      Answer This Question

      A:  Master Flow does not make load bearing or floor trap doors.

      by|Sep 6, 2022
        caret
        Q:How deep is in the internal flange?
        by|Sep 3, 2022
        1 Answer
        Answer This Question

        A:  The Flange is 1/2 inch. If you have any other inquiries about our Master Flow products please email warrantyllbp@gaf.com

        by|Sep 6, 2022
          caret
          Q:The panel looks like it is surface mount. Is there any internal flange that goes over the dry wall? This is actually a touch larger (wider) than my opening but that is fine as I have the room and can adjust to make it fit drywall wise.
          by|Jul 26, 2022
          3 Answers
          Answer This Question

          A:  The flange fits inside the drywall, it is recommended to install the door in a framed opening.

          by|Jul 29, 2022

            A:  There's a interior flange that fits inside the cut out side area of the sheetrock. I'm pretty sure this is what your asking. It's not just a flush panel frame.

            by|Aug 1, 2022

              A:  Yes it does have a little internal flange

              by|Jul 29, 2022
                Showing 1-4 of 38
                caret

                Customer Reviews

                3.8 out of 5
                (108)
                • 3.8
                  out of 108 reviews
                • 67%recommend this product
                Filter by:
                Showing 1-10 of 108 reviews
                This is a great option for an attic access. Cut...
                This is a great option for an attic access. Cut out the hole to match the recessed back of the door and screw it into the studs. It is lightly insulated and has 2 screw turn locks on the front.
                by
                • Verified Purchase
                exactly what I had hoped for. I use this to access a crawlspace area, turned out great, didn't co...
                exactly what I had hoped for. I use this to access a crawlspace area, turned out great, didn't come with screws. has very thin insulation on back of the door and set screws to "lock" the door
                by
                  • Recommended
                  Worked great. I wanted to make an access panel for...
                  Worked great. I wanted to make an access panel for my main water valve in my basement. One side was a little bent, from shipping I suppose. I just bent it back with a hammer and some pliers. I have not tried painting it yet. I'll let you know how that guys later.
                  by
                  • Verified Purchase
                  3 found this review helpful
                  Returned due to being bent and scratched up
                  When I opened the package that it came in I immediately noticed that there was a serious bend in one end of the product. It looked like one end had a forklift run over it. Since it was pretty heavy duty sheet metal there was no way I could bend it back by hand. The front of the product was also very scratched up. I assume that happened at the same time the bend was put in the end. Irregardless of the scratches there was no way I could put the thing up with the serious bend in it so I ended up returning it to the store as defective.
                  by
                  • Verified Purchase
                  2 found this review helpful
                  Good product, very tight panel.
                  I used this to replace the standard type door for my HVAC access. The foam insulation does help with noise, but the panel is extremely tight on the hinge side and binds a little when opening. I don't open it often so its not a big deal!
                  by
                  • DIY
                  • Recommended
                  4 found this review helpful
                  FLIMSY
                  Very flimsy, wouldn't recommend if you're going to use it frequently.
                  by
                  Response from Master FlowFeb 2, 2023
                  Sorry for your experience. We do not typically have issues with this product. Thank you for your feedback. MasterFlow
                  • Verified Purchase
                  by
                  • Verified Purchase
                  Very flimsy door. Did not shut right. Bends easily....
                  Very flimsy door. Did not shut right. Bends easily.
                  by
                  Response from Master FlowJan 26, 2023
                  Sorry for your experience. This is not a common issue for this product. Thank you for your feedback. MasterFlow
                  • Verified Purchase
                  Exactly the product description Perfect...
                  Exactly the product description Perfect
                  by
                  Response from Master FlowJan 19, 2023
                  Thank you for the feedback. Glad you were satisfied with your Master Flow purchase. MasterFlow
                  • Verified Purchase
                  by
                  • Verified Purchase
                  Showing 1-10 of 108 reviews

                  Frequently Bought Together

                  +
                  +
                  Price:
                  $18556