Store SKU #
A: Always seal seams with building code approved sealant or duct tape. If you have any other inquiries about our Master Flow products please email email@example.com
A: You will have to contact your local Home Depot for that information.
A: If you would scuff the pipe with maybe 220 or 320 grit sand paper and use the correct paint for metal, then I don't see why not.
A: The paint may not adhere as desired although, HVAC pipe can be painted, you must clean thoroughly and use a paint designed for galvanized metal.
A: I don't know what the tolerance is, but the straight section of the item I purchased has a circumference of 639 mm which is an OD of 8.00787 in. It's #30 gauge, which is 0.012 in thick, which makes the ID 7.98387 in.
A: The diameter is 8 inches. Have no measured the circumference but you can learn how to do that on an internet search.......'what is the circumference of a circle with a diameter of 8 inches........?'
A: The pipe is a nominal 8" diameter pipe, The crimped end is slightly smaller and fits into a non-crimped 8" pipe. If you have any other inquiries about our Master Flow products please call Technical Services at 800-211-9612 or email firstname.lastname@example.org
|Brand||Master Flow||Master Flow||Master Flow||Master Flow|
|Name||8 in. Dia x 24 in. L 26-Gauge Round Metal Duct Pipe||8 in. x 5 ft. Round Metal Duct Pipe||10 in. x 5 ft. Round Metal Duct Pipe||12 in. x 5 ft. Beaded Round Metal Duct Pipe|
|Material||Galvanized Steel||Galvanized Steel||Galvanized Steel||Galvanized Steel|
|THD SO SKU||1000683038||1002542913|
|View Product||View Product||View Product||View Product|