Model # 4SLSTP4040DD-UNV

Internet #206687930

Metalux 4 ft. Linear White Integrated LED Warehouse Strip Light with 4760 Lumens, 4000K, UNV Voltage
0080083705825

Metalux

4 ft. Linear White Integrated LED Warehouse Strip Light with 4760 Lumens, 4000K, UNV Voltage

$ 80 73 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

When the job requires reliable, efficient LED lighting, Metalux commercial LED should be top of mind. This single-lamp commercial LED strip light has an impressive 4,000 lumen output, enhancing workplace safety and functionality while saving energy. Its convenient features -- like easy row installation and universal 120-277V driver -- mean you save time on installation. Your customers will appreciate the lighting upgrade that’s both maintenance and glare-free.
  • Single lens. Perfect for replacing 2-lamp fluorescent strips
  • Superior performance. 4,000 lumen output, saves you up to 40% energy with LED technology
  • Easy, flexible installation. Create continuous rows using snap-on row mount accessory
  • Premium optics. Impact resistant 4ft long single-wide lens
  • Maintenance-free. Runs for 60,000 hours without lamp replacement, with normal use
  • J-box cover and decorative end caps included
  • Tool-free driver for easy, below-ceiling access
  • Dimmable. 0-10V to 10%
  • Universal 120-277V input
  • cULus listed 1598 for damp locations
  • Universal voltage



Product Overview

Model #: 4SLSTP4040DD-UNV
Internet #: 206687930

When the job requires reliable, efficient LED lighting, Metalux commercial LED should be top of mind. This single-lamp commercial LED strip light has an impressive 4,000 lumen output, enhancing workplace safety and functionality while saving energy. Its convenient features -- like easy row installation and universal 120-277V driver -- mean you save time on installation. Your customers will appreciate the lighting upgrade that’s both maintenance and glare-free.

  • Single lens. Perfect for replacing 2-lamp fluorescent strips
  • Superior performance. 4,000 lumen output, saves you up to 40% energy with LED technology
  • Easy, flexible installation. Create continuous rows using snap-on row mount accessory
  • Premium optics. Impact resistant 4ft long single-wide lens
  • Maintenance-free. Runs for 60,000 hours without lamp replacement, with normal use
  • J-box cover and decorative end caps included
  • Tool-free driver for easy, below-ceiling access
  • Dimmable. 0-10V to 10%
  • Universal 120-277V input
  • cULus listed 1598 for damp locations
  • Universal voltage



Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Price
$80.73 /each
$89.97 /each
$94.64 /each
$106.62 /each
Name 4 ft. Linear White Integrated LED Warehouse Strip Light with 4760 Lumens, 4000K, UNV Voltage XWLED4 120 24 -Watt Gray Integrated LED Strip Light Wet Location XVML 33-Watt Gray Integrated LED Strip Light XVML 49-Watt Gray Integrated LED Strip Light
Brand Metalux Lithonia Lighting Lithonia Lighting Lithonia Lighting
Ratings (16) (22) (0) (0)
View Product View Product View Product View Product

Specifications

Dimensions

Length/circumference (in.)
46.5
Product Depth (in.)
46.5
Product Height (in.)
2.43
Product Width (in.)
2.43

Details

Actual Color Temperature (K)
4000
Color Rendering Index (CRI)
83
Color Temperature
Cool White
Commercial Light Type
Strip
Connection Type
Hardwired
Dimmable
Yes
Fixture Color/Finish
White
Fixture Color/Finish Family
White
Hardware Included
Yes
Hooded
Yes
Light Bulb Type Included
Integrated LED
Lumens
4000
Package Quantity
1
Product Weight (lb.)
4.2lb
Replaceable LED Module
No
Returnable
90-Day
Watt Equivalence
64
Wrap cover/lens included
Yes

Warranty / Certifications

Certifications and Listings
1-UL Listed,cUL Listed
Manufacturer Warranty
5 year limited

Specifications

Dimensions

Length/circumference (in.)
46.5
Product Depth (in.)
46.5
Product Height (in.)
2.43
Product Width (in.)
2.43

Details

Actual Color Temperature (K)
4000
Color Rendering Index (CRI)
83
Color Temperature
Cool White
Commercial Light Type
Strip
Connection Type
Hardwired
Dimmable
Yes
Fixture Color/Finish
White
Fixture Color/Finish Family
White
Hardware Included
Yes
Hooded
Yes
Light Bulb Type Included
Integrated LED
Lumens
4000
Package Quantity
1
Product Weight (lb.)
4.2lb
Replaceable LED Module
No
Returnable
90-Day
Watt Equivalence
64
Wrap cover/lens included
Yes

Warranty / Certifications

Certifications and Listings
1-UL Listed,cUL Listed
Manufacturer Warranty
5 year limited

Questions & Answers

Can you feed this light from the end of the units ?

Asked by: Ed
There are knockouts on both ends, and on top. Metal is thin and bends easily, be careful when removing knockouts.
Answered by: Incident51
Date published: 2018-07-19

Does the fixture have knock outs on the ends?

Asked by: Dave
Yes. The knock-outs have a slot in the middle to facilitate removal with a screwdriver.
Answered by: Greensyn
Date published: 2018-07-24

Is the LED bulb provided with the fixture?

Is the LED bulb provided with the fixture?
Asked by: Moose
Yes!
Answered by: U2KWICK
Date published: 2018-09-18

Is this fixture good for use with good light in an apartment kitchen? (@10'x14')

Is this fixture good for use with good light in an apartment kitchen? (@10'x14')
Asked by: hildyjohnson
It wouldn't be my choice for a kitchen unless it's under the cabinets.
Answered by: SuperPaul
Date published: 2018-06-04
  • y_2018, m_11, d_17, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_, sid_206687930, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 59ms
  • QUESTIONS, PRODUCT

Customer Reviews

4 ft. Linear White Integrated LED Warehouse Strip Light with 4760 Lumens, 4000K, UNV Voltage is rated 4.3 out of 5 by 16.
Rated 5 out of 5 by from Liked the light. It provided ample light for the work environment. Only disadvantage was that i... Liked the light. It provided ample light for the work environment. Only disadvantage was that it was designed to be screwed into floor joists. Had to rig a way to hang it from chains below the joists. Would recommend it though.
Date published: 2018-09-11
Rated 3 out of 5 by from I was tired of the fluorescent tube lights that would not reliably come on when it was warm, let alone in the wintertime. This fixture solved the problem and is rated to last up to 24 years. It is guaranteed for 5 years. It is not an easy to mount or wire the fixture out of the box. It appears to be aimed at commercial/industrial applications (the 277-volt capability supports this), but the finished installation is clean looking and a major improvement over the old ballasted, fluorescent fixtures they replaced. The fixture is designed to be surface-mounted and hard-wired through knock-outs in the back (top side) of the housing. However, there are knock-outs on each end that could be used for wiring or making corded connections. Step one is to disassemble the fixture, yes, remove lens and the LED lamp module from the metal housing and set them aside. The mounting holes are 37-3/16-inches apart so both holes will not line up with normal joist spacing if installing perpendicular to the joists. (I would really like to know how/why the designer decided on the hole spacing.) The best (most secure) solution would be to drill an additional mounting hole If you have an existing rough-in or are replacing an existing fixture and need to match-up the rough-in with a knock-out in the fixture, it will probably be necessary to drill all new mounting holes or add a hole for the power feed. In my case, I installed the fixture parallel to the ceiling joists and since the j-box was mounted on the side of the joist, I could not screw into the joist. Rather than use toggle bolts which require a relatively large hole for insertion, my solution was to use screw-in plastic drywall inserts. Two of the right size will have plenty of capacity to hold up the fixture. I was able to use one of the provided knock-out locations to feed the wiring through the back. A j-box cover is provided with the fixture. The fixture does not come with any of the quick connect or push-in type of connectors shown in the instructions. However, a different type of push-in connector is provided on the pig-tails from the driver to receive the power wiring and there is a grounding pig-tail with a push-in connector. Each connector has an extra port to receive wiring for end-to-end, row mounting. Depending on where the fixture is located relative to the j-box, you may need to extend the feed wiring to the push-in connectors. There is no obvious way to remove a wire once it is inserted in the connector so if it becomes necessary to break a connection, the wire will need to be cut and reconnected with wire nuts. I wanted to mount two 4-foot fixtures end-to-end—row mounting—which uses a connector tab which is provided as part of the end plate. The tab is remove from the end plate by bending it back and forth a few times. (A special connector is listed for connecting an 8-foot fixture to a 2 or 4-foot fixture.) I used a threaded bushing to connect the two fixtures in addition to the tab. The knock-outs on the mating ends will need to be removed so the interconnecting bushing can be installed so wiring can pass. You will need to provide your own interconnecting wiring. Once the housings are mounted and aligned, the LED module wiring can be pushed into the connectors. This is where you will need an assistant to hold the module while the wiring is completed—an awkward task otherwise. The 4-foot LED module can then be easily snapped back into place. Repeat the process with the other 4-foot module, and then snap the cover on. Decorative plastic end caps can be snapped on each end to complete the installation. A final comment: The fixtures are much narrower than the old ones they replaced so if the old ones were painted around, you should plan on repainting the ceiling as part of the installation process.
Date published: 2018-07-24
Rated 4 out of 5 by from Narrower, lighter weight, brighter and more stable illumination than the double tube fluorescent ... Narrower, lighter weight, brighter and more stable illumination than the double tube fluorescent fixture it is replacing. The 1980's home we bought a few years ago had 20+ double fluorescent fixtures in the kitchen, pantry, basement and garage. Many flickering or just not lighting at all in cold weather or damp weather. Been replacing them a little at a time with LED strips. This strip replaces a double tube fluorescent with equivalent lumens. Note that this fixture wants to be installed over an electrical box or otherwise hard-wired, it does not come with an A/C plug for daisy chaining. Does not come with any hanging hardware such as chains or hanging wires, and mounting holes are few. I found I had to drill a couple of holes in the fixture to screw it onto the ceiling joists in my basement to ensure it was properly supported.
Date published: 2018-07-19
Rated 5 out of 5 by from SLSTP 4 ft. 43-Watt White Integrated LED Strip Light Fixture, 4000 Lumens, UNV voltage --- well, ... SLSTP 4 ft. 43-Watt White Integrated LED Strip Light Fixture, 4000 Lumens, UNV voltage --- well, i got way more than i bargained for with this light fixture. Im a big fan of LED fixtures and i was looking forward to replacing my old flaurescent basement shop light with this new LED version. But i didnt understand when i chose it that its a hard wire only unit, not a quick plug in and use fixture. So that has slowed me down as i dont have a hard wire box to wire it into. So im going to have to create a power cord for it so that i can plug it in to the outlet that my current fixture is plugged into. I hope that works. But the light itself looks nice and its well packaged! i just havnt been able to turn it on and use it .... yet!
Date published: 2018-06-22
Rated 5 out of 5 by from Metalux 4SLSTP4040DD-UNV is a bright nice looking LED light strip. I installed it in our basemen... Metalux 4SLSTP4040DD-UNV is a bright nice looking LED light strip. I installed it in our basement storage area because I had regular fluorescent lights and wow does this make a difference. Our ceilings are 9ft in height. It lights up quickly, unlike another LED strip light I also have of another brand in another area of the basement which hesitates going on. Using two people to install is not necessary but easier since it is difficult to hold and connect the wires etc. With 4000 lumens it gives a lot of brightness. Its says you can use with dimmer, but we chose not to. Would purchase more for the garage too!
Date published: 2018-06-12
Rated 5 out of 5 by from When we moved almost two years ago, I knew I wanted to change out the old ballast lights. They m... When we moved almost two years ago, I knew I wanted to change out the old ballast lights. They must have received a good deal when building the house. I replaced the blown ballast in the master closet with a small LED light. I had one working ballast and one blown ballast in the garage. I was able to pick up the 4ft version and an 8 ft version of this strip light. WOW! Just WOW! I have replaced many lights, so this was as easy as that. The directions are super clear if needed. I shut off the breaker, removed the old ballast and installed the new ballast. Did I say, WOW, yet? Even during the day, these things add some serious light. Since they are LED, I am not worried about how much they are pulling to do so. I can now work in the garage with plenty of light. At night with the garage closed, you would think it was daytime. Extremely happy with this product. Good chance I will replace all the other ballast locations more of these LED lights.
Date published: 2018-06-06
Rated 5 out of 5 by from Great LED light, nice and bright, comes on quickly,fairly easy to install. I installed this light... Great LED light, nice and bright, comes on quickly,fairly easy to install. I installed this light over my work bench in the garage, it looks and works great. The light is setup so you can easily and lights in a long string. Easy slip in or plug in connections. Easy to install with a drill and phillips screw driver. Mine replaces an single incandescent bulb that left shadow areas.
Date published: 2018-06-04
Rated 4 out of 5 by from Just what I needed over my garage work bench. It is pricey compared to conventional light fixture... Just what I needed over my garage work bench. It is pricey compared to conventional light fixtures of this type, but the brightness and alleged life span of the led's should make up for the difference in replacement bulbs. Life span: 50,000 hours of life (equivalent to 22 years of life at 6 hours per day or 45 years at 3 hours per day). I foresee many hours of illuminated tinkering under this nice bright light.
Date published: 2018-05-29
  • y_2018, m_11, d_17, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_, sid_206687930, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 63ms
  • REVIEWS, PRODUCT