#1 Home Improvement Retailer

Internet # 328301122

Model # 48-22-2219-48-22-3082

Store SKU # 1010839742

1000V Insulated Slim Tip Screwdriver Set with Self-Adjusting Wire Stripper and Cutter (5-Piece)

$54.97
Apply Now
Pay $29.97 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

The Milwaukee 1000V Insulated Slim-Tip Screwdriver Set features a flush insulation layer at the screwdriver tip delivering easy access into tight spaces. The 1000V rated layer of insulation is flame retardant and impact resistant, and the magnetic tip helps to prevent accidental screw drops. The 1000V Insulated Slim Tip Screwdrivers feature a comfortable tri-lobe handle and include common tip types such as phillips, cabinet, and square. These insulated screwdrivers are backed by Milwaukee 's Limited Lifetime Guarantee. The Milwaukee Self-Adjusting Wire Stripper and Cutter offer quick, versatile wire stripping of 10-20 Solid AWG, 12-22 AWG Stranded, and 12/2, 14/2 NM Cable. This wire stripper and cutter delivers fast strips by self-adjusting to strip NM cable or multiple wires in a single pass. There are 2-adjustable dials: 1-that controls the tension of the jaws depending on the wire size, while the other tightens the adjustable stop to control strip length. The built-in cutter is positioned close to the pivot point for increased leverage and can cut up to 12/2 NM cable in a single pass. All Milwaukee wire strippers are backed by their Limited Lifetime Warranty.

Highlights

  • Easily access tight spaces - slim tip
  • 1000V insulated protection
  • Comfortable tri-lobe handle
  • Precision machined tips
  • Strong magnetic tips for fastener retention
  • Visible ID markings
  • Includes insulated slim tip screwdrivers in sizes: 1/4 in. cabinet x 4 in., #2 PH x 4 in., 3/16 in. cabinet x 6 in., #2 square x 6 in.
  • UL classified - tested and certified to insulated tool standards
  • Certified to IEC 60900 and ASTM F1505 standards for insulated tools
  • Limited lifetime warranty
  • Includes: (1) 3/16 in. Cabinet - 6 in. 1000V Insulated Slim Tip Screwdriver, (1) #2 Phillips - 4 in. 1000V Insulated Slim Tip Screwdriver, (1) 1/4 in. Cabinet - 4 in. 1000V Insulated Slim Tip Screwdriver, (1) #2 Square - 6 in. 1000V Insulated Slim Tip Screwdriver, (1) self-adjusting wire stripper and cutter
  • Strips 12/2 and 14/2 nm cable
  • Strips 10-20 solid and 12-22 stranded awg wires
  • Return Policy

Product Information

Internet # 328301122

Model # 48-22-2219-48-22-3082

Store SKU # 1010839742

Additional Resources

Shop All Milwaukee
From the Manufacturer

Specifications

Details

Color Family

Red

Drive Style

Multi-Bit

Electrical Tools Features

Handheld, Insulated, Magnetic Tip, Portable

Hand Tool Type

Screwdriver Set

Individual/Set

Set

Number of Pieces

5

Returnable

90-Day

Tool Set Type

Screwdriver Sets

Tools Product Type

Hand Tool

Warranty / Certifications

Manufacturer Warranty

Limited Lifetime Warranty

Questions & Answers

1Question
caret
Q:Do you think this would work on 14/3 UF cable to remove the outer sheathing?
by|Feb 24, 2024
1 Answer
Answer This Question

A:  Hi James, the MILWAUKEE Self-Adjusting Wire Stripper and Cutter offer quick, versatile wire stripping of 10-20 Solid AWG, 12-22 AWG Stranded, and 12/2, 14/2 NM Cable. - Milwaukee tool Social Team

by|Feb 26, 2024
    Showing 1-1 of 1

    Customer Reviews

    4.3 out of 5

    • 4.3 out of 65 reviews
    • 75% recommend this product
    Filter by:
    Showing 1-10 of 65 reviews
    Great wire strippers
    These are a great pair of wire strippers. I've used them on 14, 12 and 24 gauge wires and they wroked on all of them. The 24 gauge it didn't do as good of a job but with how thin the wires are it did a great job. I do love how you can leave the ends on the wires so that after they're in place you can just pull the ends off. Also the adjustable depth stop is a very nice feature to have. I do like the included wire cutters other pairs I've used haven't had this so its a very welcome addition.
    by
    • Recommended
    Never thought I’d like this style better than standard wire strippers
    I have always used standard style wire strippers and have never had an issue with them. I got a cheap pair of fast strippers as a gift and was not impressed. I was however intrigued to see if a good set would be worthwhile, so I picked up these. The short answer is yes, they are worth it. I still like the stand style because I am use to them and they are smaller. The pro of these for me has been the uniformity of the stripped wire length; the lack of needing to pick the correct gauge notch (helpful in low light); and the ability to strip double wire in one squeeze of the handles. It makes for quick work with even lengths of exposed copper. These strippers have a built in wire cutter that can handle up to 12/2 NM cable. They will strip solid core down to 20 AWG, stranded down to 22 AWG, and 12/2 & 14/2 NM wire. It has a screw to adjust the depth of the stop for dialing in the length of stripped ends, and another screw to adjust tension. I have not needed to mess with the tension adjustment, but both screws are tool free adjustable. If you have the room in your pocket or tool bag, these are perfect for making a lot of uniform wire strips. The grips aren’t soft, but they are ridged enough to be pretty non-slip. They require a little bit more hand strength to squeeze, but less overall effort since you don’t have to pull partially cut sheathing off of the wire core.
    by
    • Recommended
    Strippers that work well
    My review if the Milwaukee self adjusting wire strippers. This my first time trying the style stripper . I feel that these are probably more useful on household wire vs automotive style primary wire. These will strip the conduit from romex with catching the wire. They will also allow you to strip three wires at once . On primary wire i like the handiness of having the crimper on the same tool which these do not have. They do have a cutter built in though. As with most Milwaukee tool they are quality built. If you are looking for this style stripper you cannot go wrong.
    by
    • Recommended
    First of all, I do recommend these for DYI use........
    Look, bottom line first, if you are reading this review and you are shopping for a good quality, solidly made wire stripper/cutter, this one met my expectations. In my opinion this is a GREAT option and without hesitation, earned my recommendation. So far for home DIY use (I can't comment for pro use), this works real well. This tool is well made, of course it’s a Milwaukee. Works well on the wires suggested for. And with some care I on smaller wires too. You can strip both strands of small paired wire at once. Two dials to control pull strength and the other in an adjustable stopper to control the length of the core strip. It’s a simple but versatile pair of wire strippers. Cutters is good too. If you have trouble with the stripping remember the adjustment dials, mine weren’t “preset”. One minor thing, it seems to be catching on an internal part when closing so it’s not an absolute smooth action.
    by
    • Recommended
    1 found this review helpful
    Excellent stripper
    This wire stripper handles a great range of sizes, from 10 ga. down to as small ast 24 ga. And it handles them well. It also handles NM (Romex type) 12 and 14ga. In addition to handling such a wide range of sizes, it allows a stop to be set to control the length of the stripped wire to be set from ¼” to ¾”. The stop can also be swung away allowing any length to be stripped. When stripping NM wire I found I could strip the outer sheath and then strip the wires in a second action. There is a copper wire cutter inside the handles too. The wire is placed in the side of the tool. The stripping is done with a single squeeze of the handles. As one squeezes the handles and grip comes down onto the unstripped wire, then a blade comes down, and then the blade is pulled away from the gripped wire. As the handles are released, both the grip and the blade are raised off the wire. There is no need to select the wire size. It looks like the blade could be replaced but I have not taken it apart to confirm that. The handles are steel and covered by rugged red plastic. The parts all fit together perfectly, well machined and manufactured. Overall a very impressive mechanism and a great time saver. Made in Taiwan Limited lifetime warranty
    by
    • Recommended
    by
    • Verified Purchase
    by
    • Verified Purchase
    by
    • Verified Purchase
    this is great on romex for sliding back outer covering and strips wire nice and fast without trying to put in the right gauge hole.
    by
    • Verified Purchase
    by
    • Verified Purchase
    Showing 1-10 of 65 reviews