#1 Home Improvement Retailer

3/8 in. x 24 in. Bell Hanger Bit

$2099
  • Unique geometric design offers fast cutting with reduced friction
  • Easily ejects wood chips with the non-stick coated flutes
  • Prevents slipping of bit with the 3-flat shank stops
  • View More Details
How to Get It

Frequently Bought Together

+
+
Price:
$2099

Product Overview

Milwaukee's Bell Hanger bits are ideal for installing all types of small wire systems including computer, security, phone and cable. A small hole at the tip of the bit enables wire to be attached to the accessory and pulled through holes when installing wiring systems. Available in 10 different sizes with 12 in., 18 in. and 24 in. lengths they provide extra reach where needed and a hole in the tip to help pull wires through holes. Non-stick coated flutes increase chip ejection and help to reduce binding. An aggressive tip geometry provides faster cutting and the 3-flat shank stops the bit from slipping in the user's drill.
  • Aggressive tip geometry provides faster cutting
  • Coated flutes for fast chip removal
  • Wire pulling hole enables wire to be attached to the bit and pulled through holes when needed
  • 3-flat shank stops bit from slipping in the drill's chuck
  • Shop All Milwaukee Tools

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Bit Diameter3/8 inBit Length (in.)24
Shank Diameter1/4 in

Details

Bit MaterialHigh Speed SteelDrill Bit TypeInstaller Bit
Drill Bit Type(s) IncludedInstaller BitIndividual/SetIndividual
Material ApplicationAluminum,Cast Iron,Duct/Sheet Metal,Stainless Steel,SteelNumber of Pieces1
Returnable90-DaySelf-FeedingNo
Shank Style3-FlatShank Style3-Flat
Tools Product TypePower Tool

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.5
    out of 12 reviews
  • 100%recommend this product
Filter by:
Showing 1-10 of 12 reviews
Drilled through wood easily and was long enough to do...
Drilled through wood easily and was long enough to do the job for adding door bell wire.
by
  • Verified Purchase
It’s the best. Job done quick and easy...
It’s the best. Job done quick and easy
by
    Great for Cable TV Coax, Ethernet Cables, Doorbell Wire and Ice Maker Water Lines
    I use this bit for drilling holes for Cable TV Coax, Ethernet Cables, Doorbell Wire, Ice Maker Water Lines and everything in between. It's the perfect size, which allows my to keep going without the need to change bits all the time. I usually go through one bit every year or two. And that's with a lot of drilling. The are so inexpensive that I don't even sharpen them. I just replace them.
    by
    • Verified Purchase
    • Recommended
    This drill bit was perfect for installing a phone line inside of wall.
    This drill bit was perfect for installing a phone line inside of wall.
    by
    • Verified Purchase
    • Recommended
    I turned a log into a lamp, but needed longer...
    I turned a log into a lamp, but needed longer center hole than the 14 inch bit I had. This 24 accomplished that feat.
    by
    • Verified Purchase
    by
    • Verified Purchase
    The first one broke and had to be returned...
    The first one broke and had to be returned
    by
    • Verified Purchase
    I used this on my lathe as a lamp auger...
    I used this on my lathe as a lamp auger bit, and it worked great. I was making a lamp, and needed to drill a 3/8" hole through the center from top through bottom. This bit worked exceptionally well through the tailstock, and it could also work through the headstock. I used a drill driver just to hold it while the lathe itself turned the wood. With the short flutes, I had to clear out the chips often, but it definitely worked well.
    by
    • Verified Purchase
    It shoes up when it was supposed to and is...
    It shoes up when it was supposed to and is exactly what I wanted.
    by
    • Verified Purchase
    Drilling into end grain for 20 inches caused the shaft to flex some, so the hole was not perfectl...
    Drilling into end grain for 20 inches caused the shaft to flex some, so the hole was not perfectly straight, but I was then able to use a 12" long 7/16 bit that I had to drill end from both ends. Overall it worked well, and I'm sure I'll have a need for it in the future as well.
    by
    • DIY
    • Verified Purchase
    • Recommended
    Showing 1-10 of 12 reviews