$10.97
- Breaker points pulverize concrete for up to 30% faster drilling
- Variable flutes provide up to 20% more holes per charge
- For use in concrete, brick and block
- View More Details
Product Details
Specifications
Questions & Answers
19Questions
Q:can this bit work for drilling a hole in granite curbing
by|Sep 18, 2022
1 Answer
Q:Can this bit be used with a standard drill chuck?
by|Apr 12, 2022
1 Answer
Q:will the Milwaukee 3/8" drill bit fit a ryobi drill?
by|Jan 15, 2022
2 Answers
Q:Can this bit be used in a rotatory drill, or does it have to be a hammer drill?
by|Nov 6, 2021
1 Answer
Showing 1-4 of 19
5
1309
4
216
3
79
2
54
1
122
May 22, 2023
2 bits and a hard fought 5 holes later…
I am drilling into a new concrete slab. I need 3/8 inch holes by 1.5 inches deep for my sill boards.
I went through two of these bits for 5 holes. And they were not easy 5 holes at all. I struggled out the gates with these bits.
by
Response from Milwaukee ToolMay 26, 2023
Hi Nick, thank you for sharing your honest feedback on your SDS-PLUS Carbide Drill Bit. If you have any additional feedback, please contact our team at Social.media@milwaukeetool.com - Milwaukee Tool Social Team
Jan 12, 2023
Goes through concrete like a hot knife on butter. Be...
Goes through concrete like a hot knife on butter. Be sure to retract the drill every now and then to release concrete dust that stays trapped in the drilled hole. Not doing so can end with a broken drill bit.
by
Mar 30, 2022
It didn’t even drill one hole
This bit didn’t even drill one hole in my basement concrete. It was getting red hot within couple of minutes of drilling, and eventually melted and turned blunt.
by
Response from Milwaukee ToolApr 3, 2022
Hello, this is Cayla with Milwaukee Tool. Thank you for taking the time to leave your review. I'm sorry to hear that your Milwaukee 3/8 in. x 6 in. 2-Cutter SDS Carbide Bit does not quite match your expectations. We would value the opportunity to further investigate your feedback and provide you with support, so please feel free to reach out to us directly at socialmedia@milwaukeetool.com. Thank You
Mar 16, 2021
Complete garbage bit
About three inches into its first hole in brick it stopped making progress. I pulled it out and the tip had melted into a ball. Had to rig up a different chuck and finished the job with the bit that came in the packet of tapcons. Would recommend for making holes in medium thickness cardboard, maybe.
by
Response from Milwaukee ToolMar 16, 2021
Hello, this is Natalie with Milwaukee Tool. SPaul, thank you for taking the time to leave your review. We're sorry to hear about your frustrations with your 3/16 in. x 7 in. 2-Cutter SDS Carbide Bit with 1/4 in. Hex Shoulder. We would value the opportunity to look into this and provide you with support, so please feel free to reach out to us directly at socialmedia@milwaukeetool.com. Thank You
Feb 6, 2021
Piece of Junk
It did t even make it 10 holes. I wasnt drilling more then 2-3” deep also.
by
Response from Milwaukee ToolFeb 11, 2021
Hello, this is Natalie with Milwaukee Tool. mattman4, thank you for taking the time to leave your review. I'm sorry to hear that your 3/16 in. x 6 in. 2-Cutter SDS-Plus Carbide Bit did not match the quality you expected. We would value the opportunity to look into this further and provide you with support, so please feel free to contact us directly at socialmedia@milwaukeetool.com so we can get this matter resolved as soon as possible for you. Thank You
Aug 27, 2020
Good product if you use it carefully
I bought 2 5/32 in x 6 in for tapcon installation on concrete floor. I use them very carefully. After drilling a hole, drill bit is dipped in water for cooling.
The first bit accomplished about 70 holes. Its tip bent after I drilled 3 holes and forget to cooling it.
The 2nd bit accomplished about 90 holes. and the whole carbide bit is gone. I'm not exactly sure why it fail so badly. Maybe it's due to I had to use it to drill through very thin lay of wood(about 1/8 inch).
The depth of hole is about 2 inch.
by
Aug 14, 2020
Do Not Reccomend
I’ve putchase 4 of these so far. The first 2 lasted a decent amount of time before they broke. The 2 that I bought this morning melted after less than a minute of use. Im hoping to find a more relianle brand because I am tired of having to stop working to go to Home Depot for new bits.
by
Response from Milwaukee ToolAug 17, 2020
Hello, this is Elise with Milwaukee Tool. KJTstl, thank you for your review. We would like the opportunity to investigate your feedback further on your bits. We value hearing your input on why this product didn’t meet your expectations and how we can improve in the future. Please feel free to contact us directly at socialmedia@milwaukeetool.com so we can get this matter resolved as soon as possible for you. Thank You
Oct 13, 2019
Not sturdy
I bought 6 drill bits 5/32 x 6” to drill my basement floor for installing wood subfloor. I was not able to drill one single hole. All 6 bits broke or bent horribly bad. Im very dissapponted. if the length was shorter maybe they would have worked better
by
Response from Milwaukee ToolOct 14, 2019
Hello, this is Mackenzie with Milwaukee Tool. Randall, thank you for your review. I am sorry to hear about your frustrations with your 5/32 in. x 6 in. MX2 SDS-Plus Carbide Bit. We'd value the opportunity to learn more about your frustrations with your Milwaukee Tool, and to provide you with support. Please feel free to contact us directly at socialmedia@milwaukeetool.com. It will be our pleasure to provide support once we have received your correspondence. Thank You
Aug 13, 2019
I drilled 6&1/2 holes through concrete before I had to change out the battery. This is the secon...
I drilled 6&1/2 holes through concrete before I had to change out the battery. This is the second Milwaukee product I own, and intend to upgrade all my power tools to Milwaukee eventually.
by
May 14, 2019
Easy to assemble and went thru the concrete like butter. This drill bit was an excellent tool to ...
Easy to assemble and went thru the concrete like butter. This drill bit was an excellent tool to drill through hard concrete
by
0/0
Explore More on homedepot.com
