The Milwaukee 3 in. Scraper Blade is designed for effortless and efficient surface prep and material removal applications with all HACKZALL and SAWZALL Reciprocating Saws. The 3 in. scraper blade offers a great solution for applications covering large surface areas. The Scraper reciprocating saw blade features steel construction with an induction-hardened edge to help extend the blade's life. The blade can be used with most HACKZALL and SAWZALL reciprocating saws. Blade can be re-sharpened.
Scraping blade works with most SAWZALL and HACKZALL reciprocating saws
Steel blade with a corrosion-resistant coating
Induction-hardened blade edge offers high durability
Chamfered corners help prevent the blade from digging into the work material
A:Â The Milwaukee 3" Scraper Blade is designed for use in adhesive, paint, linoleum, sealant. - Social Team
by|May 31, 2023
Showing 1-1 of 1
Customer Reviews
3.1 out of 5
(271)
3.1
out of 271 reviews
44% recommend this product
590
433
332
235
181
Filter by:
Showing 1-10 of 271 reviews
Sep 19, 2022
I would not buy again.
The scraper worked great right up to when it broke. It was the first job I used it on. I used it 45 minutes to hour. I was using it to remove dried glue from wood. The blade did not dull any.
by
Response from Customer CareSep 20, 2022
Hello! Thank you for taking the time to share your experience. We will follow up with you via email shortly! -Social Team
Customer review from milwaukeetool.com
Nov 6, 2020
Broke in under 10 minutes
Sheared off and broke in less then 10 minutes. I buy a lot of Milwaukee products but they missed the mark on this one.
by
Response from Milwaukee ToolNov 6, 2020
Hello, this is Elise with Milwaukee Tool. Rob, thank you for your review. We’re sorry to hear that your experience was not of the standard that you expected. We would like the opportunity to explore your feedback further. Please feel free to contact us directly at socialmedia@milwaukeetool.com if you would like further investigation into this matter. We look forward to gaining resolution on this for you. Thank You
1 found this review helpful
Oct 4, 2020
Fragile
I bought one today to scrape chipping epoxy off of my basement floor. It broke within 10 minutes. Luckily I live close to my local Home Depot store and exchanged it. The second one lasted about 15 minutes. On my way back again, I guess. This time I'll just get another hand scraper. By the time you factor in going back to the store to exchange the thing every half an hour, it's faster to just do it the old-fashioned way.
by
Response from Milwaukee ToolOct 5, 2020
Hello, this is Elise with Milwaukee Tool. Doug, thank you for your review. We’re sorry to hear that your experience was not of the standard that you expected. We would like the opportunity to explore your feedback further. Please feel free to contact us directly at socialmedia@milwaukeetool.com if you would like further investigation into this matter. We look forward to gaining resolution on this for you. Thank You
2 found this review helpful
Jul 15, 2020
Worked until it didn’t
Bought this blade attachment to try and remove the leftover adhesive on my floor from some linoleum I removed. The blade worked fairly well for about 30 minutes until it snapped at the point of attachment. Unfortunately I didn’t read any of these reviews because it looks like it happens to everyone. Clearly this was not meant for continuous or stressful work and is poorly designed.
by
Jul 3, 2020
Not bad, but not really good.
Bought this attachment for my Hackzall to scrape paint from a concrete floor. Does a good job if going slowly at the perfect angle and not using a ton of downward pressure. The problem I see is at the point of attachment. The neck is weak and very small. The sideways design makes it awkward to scrape for long lengths of time also. The design needs to improve and the base needs to be reinforced or much thicker.
by
Recommended
Apr 22, 2020
Poor Quality
Bought a 1-1/2" and 3" one of these to scrape reflective sticker off of a trailer. Both of them broke within a couple minutes. I cannot imagine using them for anything indistrial if they wont even handle taking stickers off. Worse yet is Milwaukee's customer service, I have tried multiple times to get them replaced or better yet refunded with no luck.
by
3 found this review helpful
Feb 29, 2020
Flooring Lifesaver
Picked this up to help remove glued Linoleum flooring in the home we just bought. worked like a charm. Was a lot easier than anything else I had tried. The hot air gun was helpful when starting a tough section you couldn't get under easy but this took up basically everything. Used the Milwaukee Hackzall 12v which is probably the right amount of power. I attached a picture of the saw and blade. You need to keep the angle flush with the floor otherwise it didn't work as well which is why I went with smaller of the hackzalls. 4/5 stars would recommend to a friend.
by
Recommended
1 found this review helpful
Jul 28, 2018
not good to remove glue off terrazzo
It is probably good for other jobs, but not to get glue off terrazzo. You need a multi tool with a scraping blade for that
by
Recommended
Jul 7, 2018
Do not buy, broke on first use on vinyl flooring
Broke the first day it was used, not adequately reinforced as reviews going back 6 years on Milwaukee's own site indicate. Poor design but worse than that not listening to the customers using the product.
by
Customer review from milwaukeetool.com
Nov 9, 2015
most rediculous tool ever
attempted to use for removing glued down linoleum tile; bought 4, broke for 4; in less than 10 minutes and that includes each time walking to the next room, opening the package, then returning to the other room to break it; floor remains; back to back breaking manual hand scrapers